Reviews
It's convenient to use without any problems.
The only complaint was the startup time, but this has been improved with the May 2024 Up date.
The screen is easy to read, and there are no problems operating it with the Gloves on.
Merit is more Large-like, which allows you to control Navigation and music without leaving your phone in the Bag, than the fact that you can no longer control your phone in Insta360.
View detail
For my first SMARTRideMonitor.
I installed it because the slight vibration of the Motorcycle was affecting the Camera function of my phone (iPhone11Pro).
We wanted to keep Wiring simple, so we chose the Type without the drareco function.
The kit comes with a variety of brackets for installation, so I think it can be used on most large vehicles. I used the base of the RAM Mount that I originally used, so I was able to install it without any extra work.
Wiring is only required to connect to the Plus and Minus terminals of the battery and to the ACC power supply.
Both WiFi and Bluetooth connect without any problems or glitches.
It is not particularly difficult to see even under bright sunlight during the day. I expect that it will be visible even in the midsummer sun.
The downside is that other WiFi-based devices will not work. I tried to remotely control my insta360 from my phone and couldn't do it.
As a supplement, when you register as a User, you will be directed to a dedicated line for inquiries and they will respond to your detailed questions. I was lost in Wiring myself, but they were very polite and helpful.
View detail
I am satisfied with it, but there are some points that may bother some people.
I purchased the initial lot and installed it on the same day, and use it every weekend for day-touring. I originally used a smartphone Holder, but found the following points inconvenient, so I purchased this SMARTMonitor.
It is a hassle to take the phone on and off every time you get in and out of the car, especially when you stop for a short while at a convenience store.
It can't be used in the rain (it's a notebook case, so it gets wet, and USB charging from Motorcycle is likely to be shorted).
・Heat makes the phone behave strangely during extreme heat.
The phone holder that can be mounted even in a pocketbook case is too bulky and cluttered around the handlebar.
When a phone call comes in while driving, the Sleep screen appears and Navigation cannot be viewed.
The proportion of parts that are not functions of the product itself (DFS for the application of the Radio Law (60-second wait for connection), Android Auto's characteristics, and performance) is large, but I will write my impressions when I put them together and consider them as a single product.
Elimination of inconvenience points
I→m still not sure how it behaves in extreme heat, but I have almost eliminated it.
Comfort of use
→ no problem but with the following caveats
Points to note
Touch with→Gloves is not very responsive, so Touch pan is required (or TradeOff, since it didn't malfunction even with considerable rain?)
→Brightness switching may be dependent on the phone side, or it may be set to nighttime MODE even in the daytime, or daytime MODE even in the middle of the night.
→After DFS is completed, it takes a long time to connect to my phone. after DFS is completed, it goes to WiFi connection, but it connects after repeating device search, Home screen, device search 2 or 3 times (1 or 2 minutes during this time). is it compatible with my phone?
→ The screen rendering is choppy. I don't use it for Video or Game, so it doesn't affect my use, but if you're used to the slippery crispness of a smartphone, that? If you are used to the smoothness and crispness of a smartphone, you may think, "What the hell?
→And Lloyd Auto is limited in what it can do due to many restrictions.
If you don't check it beforehand, you may be surprised at how little you can do if you use it like MirrorRingMonitor on your smartphone.
Overall, I am satisfied with the price because I was able to solve the inconvenience I had expected at this price, but I think I might have been disappointed if I had purchased the product without much research.
View detail
Smartphone Holder KaEdia
This Holder can be easily attached with the included Hexagonal Wrench. It has an Attachment for any Motorcycle. It is very easy to operate and you can fix and remove the phone with one hand. I am very satisfied with it. View detail
KaEdia is still good!
Although many companies have released SMARTMonitor, I have been waiting for CaEdia's product. I have been waiting for a product from CaEdia because, after all, it is the most cost-effective. I have purchased many of KaEdia's products and knew their high quality and high cost performance, so I had no hesitation in deciding that the SMARTMonitor would also be made by KaEdia. After more than two months of ordering, the SMARTMonitor finally arrived.
There was a small product defect there. It was a paint bald on the housing.
I immediately contacted KaEdia and they were able to promptly replace the item with a good one. As expected of JapanBrand ^ ^.
After installing it, the actual feeling on the Motorcycle is perfect!
View detail
Because it is small, it does not interfere with the Meter and Handlebar area, but the map is also small in its own way.
Other companies have similar products, but I was bitten by the fact that it was a new product. I purchased this product without considering the size of the screen, but it is rather small. When I installed it, it did not interfere with the Meter or other devices, which was probably a good thing,
The large size of the map is the same as that of a smartphone, which is hard on the eyes of an old person, but the instructions are only rough, so you have to learn to use it by hand. Except for the Motorcycle Rose, Wiring is not difficult to install with the color-coded connectors. However, since the Camera connector is the same color for front and rear, it is recommended to temporarily turn on the power during the installation (since the Camera in the back has a reversing function). If you do not use your motorcycle frequently, it is recommended that you connect the ACC and the constant power to ACC separately. If you do not use your motorcycle often, it is better to use only the ACC connection for constant and ACC. I put a switch in the middle of the ACC power supply because the power comes on even when it is not in use. At first I thought the Touch screen response was sluggish, but with my bare hands it was fine, and in my experience it was sluggish with Gloves, but with Gloves, which does not support smartphones, the movement was better. However, the buttons are small enough to fit the screen, so you may end up pressing the one next to it. There is no automatic screen illumination adjustment (I always set it to max except at night. You can set the screen to nighttime, but it's a bit of a hassle). The position of the HomeButton on the map screen is annoying (it can be moved temporarily).
View detail
Depends on the use of Main.
I purchased Mirror as Main, which is easy to see during the day.
I bought this one considering the cosmetics including Included Parts:because it was difficult to see the screen in Situation where the sun shines during the daytime with my previous driver's recorder with Monitor.
The screen visibility is not as good as the Tanax SMARTRideMonitor installed on Main's Motorcycle, but if you don't compare it to the Tanax SMARTRideMonitor, you can see the screen even in daylight at a perfectly acceptable level.
In terms of the total price including the Air Pressure Monitor, I think it is a totally reasonable price.
I use it in car play, but when I want to use it in Camera screen, it tries to switch to car play by itself, so I have to operate it each time to switch the screen back.
I would appreciate it if this is fixed in a future version up, but I have no problem using it as a SMARTMonitor.
But overall satisfaction is very good.
If you are hesitant about Tanax because of the price, I totally recommend it. Quantity with the same content:Set is almost half the price, lol.
View detail
Easy to use
It is a replacement for DAYTONA's Smartphone Holder.
It is easy to install and easy to use.
Vibration absorbing Bumper was installed at the same time.
View detail
Large texture
Size-wise, it's like a Large tree, but I think Hold is a good idea.
Good for single cylinder motorcycle as I also added vibration protection.
View detail
KaEdia SafetyBand
I had to repurchase it because it shredded when I was stretching it to install my phone on a cold day.
It would be better if it were a little thicker.
View detail
Used in combination with KDR-M14C
It is used in combination with KDR-M14C.
I use it on a road motorcycle, but since it is not for motorcycles, it may not be very effective.
There is no high frequency vibration like Motorcycle, so it may not have been worth it. I bought it for comfort.
View detail
Smartphone Holder
I am very happy with the quality, it holds well, and it is inexpensive. View detail
Smartphone Holder
Hold feel and texture is good. And cheap. View detail
Used in Touring!
I purchased this product as a vibration countermeasure for my phone. I had seen the installation situation on You Tube, etc. beforehand, so I was able to install it Smoothly while looking at the Instruction Manual.:Set. In other companies' Impression, a fixed Ring is Loose. I was introduced to the phenomenon, and I was no exception. While idling at a roadside station, I noticed a different sound than usual. The fixed ring had loosened spectacularly. Since then, when I depart in the morning Loosening." I try to make sure that I am ready to go before I leave. Sometimes I touch it at CoffeeTime to check it. I will check the durability and so on next Season. View detail
good-looking
It does not sway much while driving and is very stable.
This was my first time installing it, but it was easy to do by myself without hesitation!
Since it is a Scooter, I also liked that it has a Mirror mount.
It is easy to remove and install because it is instantaneous.
However, it was a blind spot that I could not install it if the Smartphone case has a Ring on it.
Remove the Case and use it.
View detail
This product is easy to use for various sizes.
This summer has been very hot and carrying a bottle of beverage was a must. I used to carry it in my bag or top case, but I could only drink it during breaks. I think the large size is good because I can easily drink when waiting for a traffic light by attaching this Bottle holder to the Handlebar Brace. The shape of the bottle has a suitable depth and the size can be adjusted. It can hold a thermal bottle, but if it becomes too heavy and affects huddle operation, I will attach it to the Engine Guard as well. The only drawback is that once the Holder is installed, the angle cannot be adjusted without disassembling the Holder. View detail
Beware if your phone is thick.
Purchased for DL1000 V-STROM250.
Similar products are available from other companies, but the original manufacturer of this shape is KaEdia, so there is a sense of security in the material and production.
Installation was easy and effortless with the included Hexagonal Wrench.
If you attach it to the bar mount of DAYTONA's Screen Offset Bracket, the screen angle of the Meter and smartphone will be aligned to reduce eye movement, and visibility when using the car navigation system will be considerably higher.
The phone thickness is 12mm including Case, so be careful if you are using a thicker phone.
SafetyBand is included and we recommend using it in conjunction with the SafetyBand.
My phone seems to be a bit thick, and although I can put it on, it does not hold completely. After it almost came off while driving, I always fasten the four corners with a band without any trouble.
The company's Shuriken Type, which has a similar mechanism, is said to be compatible with a thickness of 15mm, so it may be a good idea to consider that one.
View detail
Looks, good!
It looks, well, not so good!
However, when the Handlebar is brought to the locked state
I'm about to hit Tank...
The position of the attachment...but not so much, it doesn't bother me.
While driving, it is easy to see.
View detail
I am satisfied with the cospa, but it is sometimes reluctant to move.
The included Mirror mount was too thick and could not be used due to insufficient Mirror threads.
I purchased it separately and was able to install it without any problems.
MotorcycleCover was applied to keep it dry during storage, but after about 3 months of use, it began to close poorly and eventually became inoperable.
However, since it was under warranty, it was immediately replaced with a new one, so I have no complaints about the response on the part of the Manufacturer.
I then mounted it directly on Mirror instead of Mirror mount, but I kind of feel like this was the right thing to do from the beginning.
It may not be suitable for high-end Motorcycle, but it is sufficient for the Maine street rider.
I have an AQUOS SH-53C sense7 with a Phone Cover and it is just under 12mm thick, but I have never felt particularly worried about dropping it, and when I run long distances I always stop the included Elastic band in two diagonal places.
View detail
Change the position of the Quad lock
I like that it is made of Aluminum, looks sturdy and Simple! View detail