Reviews
Cospa best
It is easy to lock and the mounting strength is Firmly fixed, unmatched by other companies. View detail
Smartphone Holder KaEdia
This Holder can be easily attached with the included Hexagonal Wrench. It has an Attachment for any Motorcycle. It is very easy to operate and you can fix and remove the phone with one hand. I am very satisfied with it. View detail
No worry about falling off.
There is no sign at all that the 120km/h section of the New Tokyo-Nagoya, the Decoration bumpy road, or anywhere else you might fall off.
Vibration absorption capacity is also very high.
I have tried a few and they are by far the most secure in preventing drops, and if you are really worried, you can easily lock it with Lever.
It is very easy to use as it is easy to connect Charger.
The only complaint I have is that it is difficult to clean because dust tends to accumulate in the groove where it is fitted.
Also, some people have a problem with the way it looks. (Depending on Motorcycle) It may seem a bit lumpy.
View detail
Easy to use
[How is it used?
I chose to install a new Smartphone Holder on my TouringMotorcycle and ultimately ended up with this product.
Anything as long as it's cheap!" I am very happy to be able to do this, And not too much of Plastic's cheap stuff, either." For me, I'm a bit of an either/or kind of guy. That's it! It seemed like a good idea.
Also, my phone has many buttons on the Right side, so I could not use the type that is inserted from the side, so I chose the type that is fixed at the four corners.
Was the one you received as per Image?
I chose Black and it was just like the Image.
How was your experience with it?
First of all, the Included Parts:are substantial for the price.
There is a diameter conversion rubberretc.Pattern and it is not difficult to install.
When the middle Button is pressed, the four corners are Fit to the phone.
Release is Quantity:Pair (for Left and Right) The only thing you need to do is to press the "+" and "-" prongs, so everything can be done with one hand while doing Gloves, which is easy.
[Points to note]
Make sure it is firmly secured before starting.
How did it compare to other products?
I had been using Chinese several hundred yen ones, but I felt they were well thought out with good strength and ease of use.
【Review】
I used to think that KaEdia was cheap or bad, but when I bought it this time, I got a good impression of Included Parts:, usability, etc.
As a smartphone mount, I have no complaints.
View detail
Easy to use
It is a replacement for DAYTONA's Smartphone Holder.
It is easy to install and easy to use.
Vibration absorbing Bumper was installed at the same time.
View detail
Excellent workability
Best quality as Smartphone Holder. A product with no complaints in terms of retention, security, and workability. View detail
Large texture
Size-wise, it's like a Large tree, but I think Hold is a good idea.
Good for single cylinder motorcycle as I also added vibration protection.
View detail
Smartphone Holder is the best!
The fit is so good that you don't feel the anxiety of saying your phone is going to fall off. View detail
Easy to use
It is convenient to attach a phone with One-touch. View detail
KaEdia SafetyBand
The band was shredded after about a year of use. I thought it would be better to make the rubber a little thicker or a little softer. View detail
KaEdia SafetyBand
I had to repurchase it because it shredded when I was stretching it to install my phone on a cold day.
It would be better if it were a little thicker.
View detail
Highest & High
The product was satisfactory for the Large change, as was the reputation. View detail
To fix your iPhone
Purchased to install on Handlebar
Large and well fixed just right.
View detail
Smartphone Holder
I am very happy with the quality, it holds well, and it is inexpensive. View detail
Smartphone Holder
Hold feel and texture is good. And cheap. View detail
Easy
[How is it used?
For Touring's smartphone Navigation.
Was the one you received as per Image?
Almost as per Image.
Was the installation difficult?
The tools required are also Quantities:Set so anyone can do it.
How was your experience with it?
As long as the Holder part does not interfere with the Meter, it is a good thing because it is easy to attach and detach the phone, and it is also cosmetically pleasing.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
Holder is plattic, so deterioration over time may be inevitable.
View detail
Used in Touring!
The handlebar of my YAMAHA NMAX155 is not bar-spec, so I have installed KIJIMA's Handlebar Mount Bracket (purchased from Webig before). I purchased the 90mm Type because I thought that the 90mm length would work well for the reasons that it would not overlap with the meter, my line of sight would be on the same level as the side-view mirror, and I would need the same level of distance as the side-view mirror to prevent presbyopia. Considering the vibration, is this length the limit?:After repeating the setting process of setting and checking the line of sight several times, and after confirming the setting after an actual ride, the decision was finally made. There was no vibration or shaking due to impact to the extent that I felt discomfort. I don't drive while looking at my phone, so I only look at it occasionally, but if the road surface conditions are good, there doesn't seem to be much blurring. View detail
good-looking
It does not sway much while driving and is very stable.
This was my first time installing it, but it was easy to do by myself without hesitation!
Since it is a Scooter, I also liked that it has a Mirror mount.
It is easy to remove and install because it is instantaneous.
However, it was a blind spot that I could not install it if the Smartphone case has a Ring on it.
Remove the Case and use it.
View detail
This product is easy to use for various sizes.
This summer has been very hot and carrying a bottle of beverage was a must. I used to carry it in my bag or top case, but I could only drink it during breaks. I think the large size is good because I can easily drink when waiting for a traffic light by attaching this Bottle holder to the Handlebar Brace. The shape of the bottle has a suitable depth and the size can be adjusted. It can hold a thermal bottle, but if it becomes too heavy and affects huddle operation, I will attach it to the Engine Guard as well. The only drawback is that once the Holder is installed, the angle cannot be adjusted without disassembling the Holder. View detail
Beware if your phone is thick.
Purchased for DL1000 V-STROM250.
Similar products are available from other companies, but the original manufacturer of this shape is KaEdia, so there is a sense of security in the material and production.
Installation was easy and effortless with the included Hexagonal Wrench.
If you attach it to the bar mount of DAYTONA's Screen Offset Bracket, the screen angle of the Meter and smartphone will be aligned to reduce eye movement, and visibility when using the car navigation system will be considerably higher.
The phone thickness is 12mm including Case, so be careful if you are using a thicker phone.
SafetyBand is included and we recommend using it in conjunction with the SafetyBand.
My phone seems to be a bit thick, and although I can put it on, it does not hold completely. After it almost came off while driving, I always fasten the four corners with a band without any trouble.
The company's Shuriken Type, which has a similar mechanism, is said to be compatible with a thickness of 15mm, so it may be a good idea to consider that one.
View detail