Reviews
Smartphone Holder KaEdia
This Holder can be easily attached with the included Hexagonal Wrench. It has an Attachment for any Motorcycle. It is very easy to operate and you can fix and remove the phone with one hand. I am very satisfied with it. View detail
Easy to use
It is a replacement for DAYTONA's Smartphone Holder.
It is easy to install and easy to use.
Vibration absorbing Bumper was installed at the same time.
View detail
Large texture
Size-wise, it's like a Large tree, but I think Hold is a good idea.
Good for single cylinder motorcycle as I also added vibration protection.
View detail
KaEdia SafetyBand
I had to repurchase it because it shredded when I was stretching it to install my phone on a cold day.
It would be better if it were a little thicker.
View detail
Smartphone Holder
I am very happy with the quality, it holds well, and it is inexpensive. View detail
Smartphone Holder
Hold feel and texture is good. And cheap. View detail
good-looking
It does not sway much while driving and is very stable.
This was my first time installing it, but it was easy to do by myself without hesitation!
Since it is a Scooter, I also liked that it has a Mirror mount.
It is easy to remove and install because it is instantaneous.
However, it was a blind spot that I could not install it if the Smartphone case has a Ring on it.
Remove the Case and use it.
View detail
This product is easy to use for various sizes.
This summer has been very hot and carrying a bottle of beverage was a must. I used to carry it in my bag or top case, but I could only drink it during breaks. I think the large size is good because I can easily drink when waiting for a traffic light by attaching this Bottle holder to the Handlebar Brace. The shape of the bottle has a suitable depth and the size can be adjusted. It can hold a thermal bottle, but if it becomes too heavy and affects huddle operation, I will attach it to the Engine Guard as well. The only drawback is that once the Holder is installed, the angle cannot be adjusted without disassembling the Holder. View detail
Beware if your phone is thick.
Purchased for DL1000 V-STROM250.
Similar products are available from other companies, but the original manufacturer of this shape is KaEdia, so there is a sense of security in the material and production.
Installation was easy and effortless with the included Hexagonal Wrench.
If you attach it to the bar mount of DAYTONA's Screen Offset Bracket, the screen angle of the Meter and smartphone will be aligned to reduce eye movement, and visibility when using the car navigation system will be considerably higher.
The phone thickness is 12mm including Case, so be careful if you are using a thicker phone.
SafetyBand is included and we recommend using it in conjunction with the SafetyBand.
My phone seems to be a bit thick, and although I can put it on, it does not hold completely. After it almost came off while driving, I always fasten the four corners with a band without any trouble.
The company's Shuriken Type, which has a similar mechanism, is said to be compatible with a thickness of 15mm, so it may be a good idea to consider that one.
View detail
Looks, good!
It looks, well, not so good!
However, when the Handlebar is brought to the locked state
I'm about to hit Tank...
The position of the attachment...but not so much, it doesn't bother me.
While driving, it is easy to see.
View detail
I am satisfied with the cospa, but it is sometimes reluctant to move.
The included Mirror mount was too thick and could not be used due to insufficient Mirror threads.
I purchased it separately and was able to install it without any problems.
MotorcycleCover was applied to keep it dry during storage, but after about 3 months of use, it began to close poorly and eventually became inoperable.
However, since it was under warranty, it was immediately replaced with a new one, so I have no complaints about the response on the part of the Manufacturer.
I then mounted it directly on Mirror instead of Mirror mount, but I kind of feel like this was the right thing to do from the beginning.
It may not be suitable for high-end Motorcycle, but it is sufficient for the Maine street rider.
I have an AQUOS SH-53C sense7 with a Phone Cover and it is just under 12mm thick, but I have never felt particularly worried about dropping it, and when I run long distances I always stop the included Elastic band in two diagonal places.
View detail
After all, it is a place where a charging cord is not necessary. 0
I had been using the company's Holder without Qi, and I was satisfied with the Large Change Hold feeling and the vibration prevention, which mitigates the effects of vibration on the phone. After all, detaching and attaching with one hand is very convenient. This time, I replaced it with this one because of the hassle of the charging cable and the fact that it stops charging in the middle of the charging process. Just by eliminating the cord, it is considerably stress-less. I am using it with USB, but it would be better if the cable that takes it from the power supply could be removed. （The hold feeling is as good as ever, but it is sometimes difficult to operate the smartphone screen corner due to the frame, so in that sense, one star is reduced. However, it is an excellent product. View detail
Freedom from unplugging the charging cord!
[How is it used?
I had been using RamMount as a Smartphone Holder and had no complaints about the body itself, but the only thing that I always found troublesome was connecting the cord for charging.
Since I use my cell phone as a navigation device, the battery drains quickly, so I always have to charge it while riding. Therefore, I have to unplug and plug the cord every time I leave the motorcycle and every time I ride again.
Was the one you received as per Image?
In the picture, each of the parts looked large and bulky, and the image seemed to stand out, but the actual product is a very ordinary Smartphone Holder.
Was the installation difficult?
The act of removing the Cowl and tinkering with the electrical system was too much of a hurdle for an amateur riding specialist, so I asked Timing to install it with me at Motorcycle Shop, where I would install a driver's license.
How was your experience with it?
It is only a small step, but it is much easier now that I don't have to unplug and plug the cord! The charging speed seems to be the same as from the cord.
Manufacturer's description. The Slide arm on the top can be fixed by simply pushing up on the phone, and can be removed by simply pushing up. Smoothly attach and detach the mobile holder with one hand." I have been using two hands because it takes a lot of strength (perhaps men can easily take it on and off with one hand). (Men may be able to easily remove it with one hand.) Since it is held firmly, I am not worried about it falling off while driving.
Vibration absorption is also said to be Standard Equipment (I couldn't really tell when I ran with it), and although I have never been particularly concerned about vibration with the Ninja, I'm relieved to know that it's there.
[Included Parts:were they on?
The screw for attaching the parts connecting the body and the mounting part was not of a common type, but had a special tool.
[Was there anything that disappointed you?
The part of the claw that holds the phone Body is Red color. It may be good for those who choose Red as a color scheme, but it is not my favorite color and I wanted it to be Black. I want to repaint it.
View detail
Used with KDR-M11C
It came with the KDR-M11C so I didn't have to buy it.
I will keep it as a spare.
View detail
Mounted on BWS125
Installed on BWS125.
I use it on my iPhone 13ProMax.
It is a good product for normal use.
View detail
I put it on my insurance.
It is not used for KaEdia's Holder.
The two holders used were each from a different Manufacturer.
the best part
I don't feel it will fall off even if I don't use it, but if I use this one, it will be held tightly and may not fall off even if it falls over.
I only use it for two stops because it's a hassle, but it stops Firmly.
If the spherical thing on the back is in the Center, it can be used for almost anything, even if it's not KaEdia's Holder.
bad point
It is a hassle to apply and remove the rubber in four places every time it is attached or detached, and it is no longer possible to remove and detach SMARTly.
It is even more troublesome with Gloves on.
Cannot be removed instantly when it suddenly starts raining.
I couldn't find it in WeBig's product page, but there are 3 pieces in the package.
3Quantity even if you need 3 cars:Do not buy Set.
If you are a worrier who never wants to drop it, you should put it on.
Removal and removal will be troublesome....
View detail