Reviews
Stable quality
I bought it because I run Circuit.
Standard Spec. allows for easy installation.
It takes a long time to deliver, so it is better to order early.
I took one light fall, but there were no cracks or chips.
It is durable and safe.
Repairing this fall with OEM Parts would be quite a Gold amount.
Those who run Circuit should change it.
View detail
Race cowl
I purchased this vehicle to make it a Race vehicle.
The delivery time was a bit long.
If you want one, get it soon!
Finished by KDC, a long-established manufacturer
Good. I use it without painting.
The installation has a part to cut and
You need to be careful.
Cut can be done with Cutter.
Seat sponge is non-slip.
It's a cheap one that doesn't exist.
We plan to replace them when they are reduced.
View detail
Before installation. 、、、、
I haven't taken delivery of the car yet lol.
I bought it because I admired CB400SB with Under Cowl that I saw on the Net.
No Instruction Manual, Included Parts:, etc.
I have not seen anything on the WebSite about it, so I guess I have to install it by imagination.
Quantity:Pair (for Left and Right) Asymmetrical, but I wonder if this is Large sturdy,...
Material is thick and appears to be firm.
BALI, uneven paint. Need to finish by yourself.
View detail
It came surprisingly quickly.
It's cool, yeah.
I chose it for its design, but I am satisfied with the quality and the price is not that expensive.
If you want to use it for street driving, I think you need to modify it.
Circuit use can be used without processing.
The surface was clean and the BALI did not match.
I used it for my diversion, but I think it would look good on OEMCowl as well.
Also, KDC does repairs for both its own and other companies, so that's another great thing.
View detail
The stuff is good, but...
This is my fault for not checking carefully, but you need to be aware that the part numbers for the early and late models are different. (W-347-563 for early model, W-347-P7985333 for late model)
I would like to see an improvement so that parts that are not compatible by year are not given a warranty of conformity.
View detail
I got something different from the picture.
I got something different from the picture.
I bought this one because I thought it was better looking than the other company's product from the picture, but it was the same thing as the other company's product.
If that were the case, I could have gotten a lower price...
It's Made-to-Order, so it's not returnable, so what do I do?
It's not cheap.
certainly "The image may differ from the actual car model and year. Please understand." but I'm not entirely convinced.
It's not the same product that came to me after I had struggled so much with the purchase.
View detail
Fits: SUZUKI BANDIT250 [BANDIT] LTD, SUZUKI BANDIT400 [BANDIT] LTD, SUZUKI BANDIT250 [BANDIT] LTD, SUZUKI BANDIT400 [BANDIT] LTD
Good quality.
It is for BANDIT250 LTD, but I bought it for the diversion Custom.
For Street and for Race are sold with white gel coat and black gel coat respectively, but I bought the black gel coat finish of for Race.
Because it is for Race, there are no holes for Headlight and Blinker and Cowl Bracket. (There is no hole in the back for Frame Mounting, but there is an indentation)
Material:Since it is an FRP product (Excuse me for saying this, but...) I wasn't expecting so much Quality.
But I was surprised at the beautiful cowl many times more than I imagined.
I was wondering if the PelePera was more for weight since it is for Race. I thought it would be a PelePera because of the weight, but it is very sturdy.
Probably 3 ply to 4 ply depending on where it is. I think so.
The part that is hard to give strength such as the part of the ear is standing Rib, and it seems that a solid design is done.
Yahoo! Because it has become not to come out to such as well, it is possible to recommend for BANDIT250 also as a diversion purpose.
View detail
The picture of the product is wrong.
The picture of the product is wrong.
The one sold by KDC is an OEM-like shape.
Even for 5VY, it may be necessary to drill holes in the sub-frame, although it is not clear whether this is due to the year or the export destination.
View detail
How nice
Installed.
Roughly 3 weeks from order.
A seat sponge is also included.
No Sticker.
I had someone I know paint it, and now it was time to install it.
The original OEM Cowl is also difficult to attach and detach from the Seat rail due to the regulator, RelayHolder and Relay attached to the Seat rail, but it is more difficult than the OEM Cowl due to the higher rigidity of the attachment parts.
I had to remove Relay from RelayHolder with Wiring as it is, and I was able to install it after one hour of struggle with Small due to the fitting with Under Tail.
Be careful not to damage the paint if it is not cured.
I was worried about the position of the screw holes, but I was able to install it without any processing.
I'll use it for Large things.
View detail
Fits: KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ900R NINJA [Ninja].
Image difference from photo "Large"
I bought the Racing Type and it's quite different from the product image. "Round. It is a cowl of shape. It is slanting to draw a gentle arc and has a shape like the product image. "Cowl like a Katana with horns. It was very disappointing because it looked like a I wouldn't go so far as to call it a scam. Did they deliver the wrong one? And I was warned about it because it's so different (it really isn't even close). View detail
A fine product.
It is a solid product and its strength is perfect.
Because it is a circuit product, there may be some rough surface finishes etc., but there is no problem at all with the Luster and the specs as they are.
The only drawback? If you want to raise the strength of the 954, you may need to make sure that you do not screw the screw angle diagonally because the AluminumScrew hole is very easy to screw in.
Overall, I'm Large satisfied!
View detail
The construction is beautiful
I bought it to install on my race car
As a Forme, it follows the OEM Forme
I don't know about the accuracy of the installation yet, but the overall construction is beautiful, so I'm hoping for the best here
View detail
Shape texture well together I liked Race ish feeling.
I was wearing it in ZEPHYR, I was worried about whether it would suit nakedu at first, but I liked it more like Race ish with a race ish than I imagined. View detail
Cost performance is good
Single Seat for VTR 250 is MotoBamm or Suzuka R & D or KDC
I tried choosing KDC's Seat which is handled by webike and price is reasonable.
I changed my mind from the OEM's bottomed Tail, and I am satisfied with the change of the lower body's Hold feeling and degrees of freedom.
However, if you wear it at the same time with Tank Pad, the installation position will be gapped with the thickness of Pad and fixed through Bolt directly to the vacant hole in Cowl, so the durability is somewhat concerned.
View detail
For Seat Cowl processing
I do not like NORMAL's Seat Cowl, so I was looking for a change in shape, I felt a downhill feeling Parenthesis I decided on this Cowl. Also at the same price etc. Although it was cheap compared to the product, it was uneasy whether it was Pa LePera, but it is satisfactory with sufficient thickness. In the case of CBR I attach a Seat pedestal, but because the hole positions did not match, I extended the hole with File and installed it. Processing is not particularly difficult because it is FRP.
(note : Seat Cowl of the picture has been cut and the shape has been changed slightly)
View detail
Cost performance is bad
I bought the earliest delivery date because it was necessary in a hurry, but the construction was bad.
It's not very popular with Bolt-on.
I scraped and drilled to Large width and I repeated Fitting many times.
We, we operate a parts processing company, Air tooletc. I have got it all but it took more than half day to complete the installation.
The combination of Cowls is also bad, Screenetc. I am quite free.
We also own Cowl made by company C, but Quality is strange.
Price is cheap etc etc. If it is you can be satisfied, but since it is the same price as other Manufacturer, the impression that Cost performance is bad is strong.
I feel sorry to Manufacturer, but I felt that I failed honestly.
View detail