Reviews
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Too easy to put on and take off.
If you squeeze the bottom first. The rest was easy to put on and take off with a zip!
It's really easy:??
I am also happy that I can hang it right away without any problems!
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Motorcycle Covers are all the rage now.
Easy to install, well thought out. Expect durability. View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Motorcycle Cover
[How is it used?
It is used for covered bicycle parking.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It was very easy.
How was your experience with it?
The Fastener was attached and easy to cover.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
Does not melt properly
I have not used it that many times yet, but I put it on right after I finish a run and it doesn't melt.
Use is also quite easy thanks to Rear's Fastener.
The price is also on the cheaper side of Body cover, so I am satisfied.
I am concerned that it is a little thin, but …….
Now I'm hoping for durability.
View detail
Fits: HONDA CT110 HUNTER CUB125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA PCX 125, HONDA PCX 160, SUZUKI ADDRESS110, SUZUKI Address125, YAMAHA AxisZ, YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus, YAMAHA NMAX125, YAMAHA NMAX155
CT125 would still be better with a dedicated Size
Purchased ahead of time with the intention of equipping Tandem seat + Box
I have the dedicated Size one, but it's still as easy to hang, the ears can be dried on the hook, and the feel of the inside is just as good as ever.
The special size was Exactly for the tire and ground surface, but this size makes it feel a little buggy.
On the other hand, there is plenty of room in a Large tight box, so it's no wonder they make it in mediocre.
The performance seems to be good. No stain even in heavy rain, no rust in the exhaust system, and I am satisfied.
View detail
Fits: HONDA CT110 HUNTER CUBCT125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB C125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50 PRO, HONDA LITTLE CUB, HONDA SUPER CUB110
My buttocks were less sore.
[Merit]
I think it is effective. around 50km in CUB (about 1.5 hours) When I did MINITouring with the HoneycombGel, I used to get butt pain in the middle of the ride and had to change my riding posture many times to change the position of my butt. I could continue to ride with the same posture until the end.
[Demerit]
The Seat height is about 3cm higher. I usually ride with thick-soled safety shoes, so it does not bother me, but when I happened to ride with thin-soled Sneakers, which I wear when I drive a MT car, I noticed quite a difference in Seat height. However, the difference is not enough to scare me, so I don't think it is a fatal demerit. (If you usually ride with Limit on your feet, you may be a bit scared...)
The price is quite expensive, so it is not easy to buy one for my other LITTLE CUB. However, it is not so easy to install that I can easily replace it. Can't you do something about the price?
OthersImpressions, etc.
Installation is not as easy as it sounds, but it's not hard either. Loosen the cord that fastens the Cover as much as you can and place the GelSeat on the back side of the Seat. (The one that says HONDA) The part of the Seat cover where the cord goes around the edge. (Material is Rubber?). is just about folded into the SeatReverse side of the CUB.
It says that it can be used for CROSS CUB and CT110 HUNTER CUB, which have thicker Seat than CUB, but since even SUPER CUB is quite puffy, I felt that CROSS and HUNTER may not have enough extra room to fold into the SeatReverse side. (personal opinion)
The CoverMaterial was more solid than I expected. That is fine, but it is not very flexible, so I felt that the advantages of HoneycombGel were not utilized. I thought the Gel would be more effective if the material was a little more flexible and stretchable. It might be a good idea to replace it with a mesh cover from another company.
It's not important, but Cover's AMBOOT." The Emblem part was sent folded, and the Emblem was almost peeling off at the apex of the fold, probably because the CoverMaterial is hard and the fold habit was sharp. I stretched it properly and pressed it down so it stuck, but I think it will peel off sooner or later. (Print?) Therefore, I think it would be a waste to have it tear and peel off, so I would like to have more adhesive strength.
View detail
Fits: HONDA Shadow slasher, HONDA SHADOW400, HONDA SHADOW750, HONDA VT1300CX, SUZUKI SAVAGE400, SUZUKI DESPELADO400, SUZUKI BOULEVARDM109R, SUZUKI INTRUDER400, SUZUKI INTRUDER1400, SUZUKI GEMMA, KAWASAKI VULCAN S, KAWASAKI VULCAN 1500 DRIFTER, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI ELIMINATOR 250V, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA VMAX1200, YAMAHA VMAX1700, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100
AMBOOT Ready-to-Hang Bike Cover 3L
I'm so satisfied with this product. I hope all riders have used it. You can cover the bike in just 10 seconds. Amboot is love. Thank you. I am a W800 rider - Amboot 3L is perfect. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB(CT125), HONDA SUPER CUBC125, HONDA rebleREBEL250, HONDA rebleREBEL500, HONDA rebleREBEL1100, HONDA CB1100, HONDA GB350, HONDA V-TWIN MAGNA, YAMAHA SR400, YAMAHA DRAGSTAR250, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI ESTRELLA 250, Others
Side bag that is nice even when empty baggage
[How is it used?
Mounted on the Left Side of a Sparkaab C125.
KITACO Side BackBracket is used.
Was the one you received as per Image?
It looks good, just as it looks.
How was your experience with it?
I have been using DAYTONA's Back until now.
I was concerned that when the luggage was small, it would be crumpled and not look good.
UnBoot's Side Back is a hard type, so it does not lose its shape even when there is no luggage in it.
[Points to note]
None in particular, but when driving in the rain, the attached Cover is essential.
How did it compare to other products?
I have nothing to compare it to.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It would be nice to have a choice of colors.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
About our products
It is good that it can be hung quickly, but it would have been better if there was also a middle part, since there are only front and back squeeze points at the bottom. I think it is a good product in terms of usability. View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Quite good.
It has a front and back drawstring, so it is more fit than I expected, easy to put on and take off, and the material is solid and will last a long time. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB(CT125), HONDA SUPER CUBC125, HONDA rebleREBEL250, HONDA rebleREBEL500, HONDA rebleREBEL1100, HONDA CB1100, HONDA GB350, HONDA V-TWIN MAGNA, YAMAHA SR400, YAMAHA DRAGSTAR250, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI ESTRELLA 250, Others
Use with c125 and thruxton.
I was able to install it as I wanted with KIJIMA's Saddlebag Support.
The mounting belt also has many holes for firm adjustment.
For now, only the One Side is available, but in the future we will be using the Quantity:Pair (for Left and Right) It will be installed.
View detail