Reviews
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Easy to hang and wind resistant. Very good.
I use this Repeater on my CT110 HUNTER CUB and GB250 CLUBMAN. It is my favorite.
I bought it last year when I bought a CT110 HUNTER CUB, because I was planning to add a front carrier and a RODCarrier to it. I am sure it will be a good reference for those who are considering purchasing it.
The front carrier is made of DRC, the largest class, and is fixed at the most forward position, so the front of the handlebar is considerably longer than in NORMAL, The height of the LeftFront section of the Rear Carrier is 10cm higher than the Seat. The lower part of the front wheel and Quantity:Pair (for Left and Right) As you can see in the photo, I can close the RearFastener to the very bottom, even with the bottom rope tightened quite a bit. I live in an area that is occasionally exposed to strong winds, and the Seat has never rolled up.
Also, I have been using it for over a year now and it has not deteriorated much. (There is a short period of time when the parking Space is in direct sunlight.) Not much dirt on it. (It has a roof, so it is virtually dry even in the rain.) and I have never washed the surface with water. I am very satisfied.
I bought it for GB250 CLUBMAN almost one year after CT110 HUNTER CUB. It is rather a little bit large, so the front wheel lower part and the quantity of the front wheel are a little bit smaller than the original size.:Pair (for Left and Right) The Adjuster rope at the bottom is fully squeezed. There is still room to spare, but not so much that it will flip up in the wind, so we are not worried at all.
Perhaps if it were exposed to rain and direct sunlight throughout the day, the evaluation of deterioration might change, but I cannot comment on that.
View detail
Fits: HONDA CT110 HUNTER CUB125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA PCX 125, HONDA PCX 160, SUZUKI ADDRESS110, SUZUKI Address125, YAMAHA AxisZ, YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus, YAMAHA NMAX125, YAMAHA NMAX155
Size fits!
Bought this for my Motorcycle with CROSS CUB box! It's thinner than the old one, but it's easy to hang! The best thing is that I can squeeze the hem. It is very good to be able to squeeze the hem. It wraps the motorcycle tightly! The price is twice as much as the previous Cover, so I expect it to be durable! View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Too easy to put on and take off.
If you squeeze the bottom first. The rest was easy to put on and take off with a zip!
It's really easy:??
I am also happy that I can hang it right away without any problems!
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Motorcycle Covers are all the rage now.
Easy to install, well thought out. Expect durability. View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
A slightly better one.
I have been using a cheap Chinese one I bought from Amazon.
I used to have to put on and take off the cover for a LARGE amount of time, and in the summer, I was sweating before I left.
This makes it a lot easier than those. It's also flame retardant and seems to be Large sturdy even if you don't wait a bit to apply it (for now).
Anyway, I don't want to go through the process again of applying Cover, putting my hand under the Motorcycle, applying Buckle, and so on.
However, I wonder if the holes on top of the Cover to release moisture are functioning properly.
I would like to see more products like this from other places to compete.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
I'm hit.
I just received this from Webike? I opened the box and found what's this?
The box was like that but with cushioning material and a flattened bottom.
I didn't expect it to be vacuum packaged.
But so much for the face White….
Well, it's okay, because they seem to be that particular about not lowering the quality.
The texture is not bad, so I wonder if the much touted 300D will perform as well as it should.
So you open the package and hope for the best. And then I put it on my Motorcycle.
I got cheated again….
I'm a dick….
The ZX-6R is listed in the "Compatibility" section of the manual, and even though the size is the same as my old Doppelganger, I can't help but notice that the ZX-6R is a ZX-6R.
It's no different than Size. But when I actually put it on, it's just a little bit too small.
I really wish they would test it on a real car before claiming it as a compatible model….
This one is even worse. Even a certain Yamaha's F Type guy could have entered Beauty if he had folded LeftMirror.
This is not good at all! Even if you fold up both Mirror, you can see all the way down to the Rear tireRim which is very tight….
The hole for the security chain, which looked large in the picture, is slightly small and does not fit through at all.
I really want my Gold back. Otherwise, I want to change it even if I have to pay the chase Gold to one higher Size….
That's not how it works anyway, right?
I had a bad feeling because this Motorcycle has a big head. But a certain Mr. Doppel's and Size are not so much.
I believed in them and bought them because they didn't change. And now I'm being treated like this.
The quality is not that bad, just not so bad as to make it easy to apply Cover.
It's just a little easier to put on. That doesn't make it bad.
But it doesn't fit the size of the latest Kawasaki cars at all. Because I have a big head.
You know what, you need to measure the actual car properly before you put the name of the car model in the compatible car models. Seriously.
You can't even return it after you've opened and used it, can you? I really want you to stop this!
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Easy to use.
I bought it on the occasion of refurbishing the exterior of my PCX, which had been my commuter companion for many years.
Once the lower strap is adjusted to the Motorcycle Size by squeezing the lower strap, removal is easy by opening and closing the Zipper on the Rear.
After removing the cover, I hang it on the S-shaped Hook. The zipper handle, the Orange Loop at the Mirror, and many other features are well thought out and easy to use.
I have regretted buying a cheap one for about 2000 yen before, but I am Large satisfied with this product.
I would also like to purchase an additional Cover from MainMotorcycle.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Motorcycle Cover
[How is it used?
It is used for covered bicycle parking.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It was very easy.
How was your experience with it?
The Fastener was attached and easy to cover.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CT110 HUNTER CUB125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA PCX 125, HONDA PCX 160, SUZUKI ADDRESS110, SUZUKI Address125, YAMAHA AxisZ, YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus, YAMAHA NMAX125, YAMAHA NMAX155
CT125 would still be better with a dedicated Size
Purchased ahead of time with the intention of equipping Tandem seat + Box
I have the dedicated Size one, but it's still as easy to hang, the ears can be dried on the hook, and the feel of the inside is just as good as ever.
The special size was Exactly for the tire and ground surface, but this size makes it feel a little buggy.
On the other hand, there is plenty of room in a Large tight box, so it's no wonder they make it in mediocre.
The performance seems to be good. No stain even in heavy rain, no rust in the exhaust system, and I am satisfied.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Silver Cover!
The cover is smooth, silver, and stress-free, and the front and rear markings are clear and easy to hold.
It can be hung immediately and is not damaged by the soft inner fabric.
It looks very good. However, is the price of 7,000 yenOver balanced? Is the price reasonable in view of the current prices? I am not sure. However, the product is very good, so I have no complaints.
I also like the solid Fastener in Orange, which makes the Rear clearer, and it's a great accent. It's a good buy.
View detail
Fits: HONDA CT110 HUNTER CUBCT125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB C125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50 PRO, HONDA LITTLE CUB, HONDA SUPER CUB110
My buttocks were less sore.
[Merit]
I think it is effective. around 50km in CUB (about 1.5 hours) When I did MINITouring with the HoneycombGel, I used to get butt pain in the middle of the ride and had to change my riding posture many times to change the position of my butt. I could continue to ride with the same posture until the end.
[Demerit]
The Seat height is about 3cm higher. I usually ride with thick-soled safety shoes, so it does not bother me, but when I happened to ride with thin-soled Sneakers, which I wear when I drive a MT car, I noticed quite a difference in Seat height. However, the difference is not enough to scare me, so I don't think it is a fatal demerit. (If you usually ride with Limit on your feet, you may be a bit scared...)
The price is quite expensive, so it is not easy to buy one for my other LITTLE CUB. However, it is not so easy to install that I can easily replace it. Can't you do something about the price?
OthersImpressions, etc.
Installation is not as easy as it sounds, but it's not hard either. Loosen the cord that fastens the Cover as much as you can and place the GelSeat on the back side of the Seat. (The one that says HONDA) The part of the Seat cover where the cord goes around the edge. (Material is Rubber?). is just about folded into the SeatReverse side of the CUB.
It says that it can be used for CROSS CUB and CT110 HUNTER CUB, which have thicker Seat than CUB, but since even SUPER CUB is quite puffy, I felt that CROSS and HUNTER may not have enough extra room to fold into the SeatReverse side. (personal opinion)
The CoverMaterial was more solid than I expected. That is fine, but it is not very flexible, so I felt that the advantages of HoneycombGel were not utilized. I thought the Gel would be more effective if the material was a little more flexible and stretchable. It might be a good idea to replace it with a mesh cover from another company.
It's not important, but Cover's AMBOOT." The Emblem part was sent folded, and the Emblem was almost peeling off at the apex of the fold, probably because the CoverMaterial is hard and the fold habit was sharp. I stretched it properly and pressed it down so it stuck, but I think it will peel off sooner or later. (Print?) Therefore, I think it would be a waste to have it tear and peel off, so I would like to have more adhesive strength.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB(CT125), HONDA SUPER CUBC125, HONDA rebleREBEL250, HONDA rebleREBEL500, HONDA rebleREBEL1100, HONDA CB1100, HONDA GB350, HONDA V-TWIN MAGNA, YAMAHA SR400, YAMAHA DRAGSTAR250, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI ESTRELLA 250, Others
Side bag that is nice even when empty baggage
[How is it used?
Mounted on the Left Side of a Sparkaab C125.
KITACO Side BackBracket is used.
Was the one you received as per Image?
It looks good, just as it looks.
How was your experience with it?
I have been using DAYTONA's Back until now.
I was concerned that when the luggage was small, it would be crumpled and not look good.
UnBoot's Side Back is a hard type, so it does not lose its shape even when there is no luggage in it.
[Points to note]
None in particular, but when driving in the rain, the attached Cover is essential.
How did it compare to other products?
I have nothing to compare it to.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It would be nice to have a choice of colors.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Quite good.
It has a front and back drawstring, so it is more fit than I expected, easy to put on and take off, and the material is solid and will last a long time. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB(CT125), HONDA SUPER CUBC125, HONDA rebleREBEL250, HONDA rebleREBEL500, HONDA rebleREBEL1100, HONDA CB1100, HONDA GB350, HONDA V-TWIN MAGNA, YAMAHA SR400, YAMAHA DRAGSTAR250, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI ESTRELLA 250, Others
For CROSS CUB
I bought it to match the CROSS CUB's body color PcoBlue.
I am satisfied without any discomfort.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB(CT125), HONDA SUPER CUBC125, HONDA rebleREBEL250, HONDA rebleREBEL500, HONDA rebleREBEL1100, HONDA CB1100, HONDA GB350, HONDA V-TWIN MAGNA, YAMAHA SR400, YAMAHA DRAGSTAR250, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI ESTRELLA 250, Others
Use with c125 and thruxton.
I was able to install it as I wanted with KIJIMA's Saddlebag Support.
The mounting belt also has many holes for firm adjustment.
For now, only the One Side is available, but in the future we will be using the Quantity:Pair (for Left and Right) It will be installed.
View detail