Reviews
Fits: KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
KawasakiW650Service manual
Essential Items for DIY maintenance.
Especially W400 with Option equipment. Kick starter." is installed, the W650 service manual is required, as the W400 service manual does not include a Kick starter section.
View detail
Tinker required.
It was essential to work on it. It was especially useful for assembling parts from Muji to SE, especially Torque.
130N is too much for the front axle, though.
The Rear was fine, but the Front started fitting the collar after 80N.
The wheels are not moving well. Most of the used wheels for sale are Bearing.
It's crushed and unusable; it's an early defect of the Manufacturer.
View detail
Large letters are still good for Parenthesis.
After all, the Tank emblem is a Large letter.
I removed the original Emblem and pasted the Large letter Emblem, using Dryer, takoyo and Silicon-off.
It takes some hang to peel off the original emblem, but if you warm it up well, it will come off in no time at all.
It was a little tedious to clean up the seal marks, but the work was worth it and I am satisfied with the good finish of Parenthesis.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE
Reliable OEM Product
Various manufacturers' products are on the market, but they are all expensive. On the other hand, OEM products are reliable in terms of quality and price. View detail
Fallen cannibals
I used to think that Engine Guard was ugly and embarrassing.
Considering the cost in the event of a fall, I decided it would be better to put it on.
I like the fact that it is not that Large in design. It is also firm when installed.
View detail
It is rather nice.
I had a few other Kawasaki caps to wear after taking off my helmet, but I was curious about the rare Apollo CapDesign, so I hesitated and bought it. This cap and the Kawasaki Racing cap seem to be made in Japan. The embroidery and sewing are well done and the quality is unquestionable.
However, this Apollo Cap is made of Felt fabric, so it is mainly for fall, winter, and spring. I think it is too hot to wear in summer.
View detail
Fits: KAWASAKI W800, KAWASAKI W800 STREET, KAWASAKI W800 CAFE
I was able to install it in a short time with no problems.
Since it is an OEM Product, of course it arrived without any problems.
I think the dress-up effect is high.
Originally Plastic for lightness.
This kind of NeoClassic Bike is for people who want to be obsessed with it.
I'm not sure about Plastic since I think Motorcycle.
If you are looking for a visual effect, not a performance one, I recommend it!
View detail
Fits: KAWASAKI W800 STREET, KAWASAKI W800 STREET, KAWASAKI W800 CAFE, KAWASAKI W800, KAWASAKI W800 CAFE, KAWASAKI W800, KAWASAKI W800
No problem, it's installed!
Since it is an OEM Product, of course it came with no problem.
Performance is the same, but the appearance has changed to a Large width.
I'm glad I put it on!
View detail
Fits: KAWASAKI D Tracker, KAWASAKI D Tracker, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI KLX250
Necessities
In this day and age, information is available if you look it up on the Net, but it is solely at your own risk.
So it seems essential to check with the Service manual of the head office.
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI Z400, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI Z250, KAWASAKI Ninja 250
Reliable Kawasaki OEM
[How is it used?
Always available.
Was the one you received as per Image?
Street Image
Was the installation difficult?
I've been riding Motorcycle for a week now and installed it with no problems.
Installation was very easy once Cowl was removed.
How was your experience with it?
I'm very happy with it
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
KAWASAKI Cafe Deflector
The long wait is over, got my Kawasaki Cafe Deflector, fast delivery and I can track my order. The product is easy to install, installation manual is easy to follow. Thank you Webike, till my next order. View detail
Fits: KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 650, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI VERSYS 1000 SE
One key
Purchased this one-key with the addition of the Top case.
The key can be easily adjusted, and the quality of the product is also good because it is a Kawasaki OEM Product.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
Wow that's cool
I think it looks very cool and the modeling is very elaborate.
Installation
Attach Damper or Bracket on Cover side
? Remove the Tandem belt from the body side
? Attach the fixture to the car body side.
and easy.
There is an Instruction Manual, and installation was Smooth even for a beginner like me.
The Cover was also fitted with in-vehicle tools, which was a nice touch by ManufacturerOEM.
After installation, it is stable with no wobble.
View detail
OEM Product
I bought ESTRELLA's Tank because I Re-painted it.
OEM is still a wonderful word.
View detail
Warmer artifact
This KAWASAKI original heating grip is used for the kawasaki w800 model. This car itself does not have an electric heating handle. It is more troublesome to install. It takes a few hours to install it. The effect is still quite obvious. Yes, there are three gears to choose from, and most of the time, the hottest gear will be used directly. Indispensable configuration in winter. -------------------------------------------------- -------- This Kawasaki original heating grip is given to Kawasaki W800. This car itself does not have electric heating handles. The installation is more troublesome. Some professional car dealers need to be installed. There are three gear options, and most of the time will be used to use the hottest gear. Winter invisible configuration. Powered by Google Translator View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R
Required for those who maintain it.
It is absolutely necessary for those who do their own maintenance.
The ZrX1200R is becoming a large old motorcycle and OEM parts are being replaced more and more often.
At that time, there is a big difference between having a service manual and not having a service manual.
Also, Torque can be a cause of breakage if it is done by an amateur, so it is definitely recommended that the Torque be done as described in the service manual.
It's just a little hard to see that the photo is WhiteBlack.
View detail
Fits: KAWASAKI NINJA250R, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Z250, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI Z400, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI NINJA400 (2014-)
more comfortable riding
My motorcycle is KAWASAKI Z400 2019. Since I am tall, the original seat height is only 790MM, and I feel uncomfortable after riding for a long time, so I bought this original high seat cushion kit on webike. The seat height can be increased by 30MM, and the comfort of the seat cushion has also increased a lot, reducing the fatigue of riding. -------------------------------------------------- -------- My motorcycle is Kawasaki Z400 2019. Because I am relatively tall, the original factory is only 790mm in height. It feels not very comfortable after the riding time, so I bought this original high -cushion kit on Webike. It can increase the sitting height of 30mm, and the comfort of the seat cushion has also increased a lot, reducing the fatigue of cycling. Powered by Google Translator View detail
KAWASAKI Sticker Sets
The size feels perfect! I love that it comes in three colors! Sticker Sets for all you KAWASAKI lovers out there! View detail
KAWASAKI NINJALogo sticker
It was exactly what I expected. 。 Parenthesis is great! It was the Size I was looking for! View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Nisshin radial brakes to Clutch
I use Nisshin's Radial masterBrake and Clutch both.
I think it would be cooler to match the size of Both SidesLarge.
[Color] Smoke is cool and works well with KaEraserd.
Note that the diameter is different from brembo.
View detail