Reviews
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS2, KAWASAKI BALIUS2, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS2
This.
I bought it for BALIUS. The BALIUSService manual has a basic version and supplemental version, and when you buy the basic version, the service manual dedicated to ZXR 250 will arrive. If you touch the Engine it is also necessary, but if you are just light maintenance like yourself, only supplemental version is enough. On the contrary, if you buy from supplemental version and it is time to touch the inside of the Engine by all means I think that you can buy the basic version.
View detail
Fits: KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZXR250, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI BALIUS2, KAWASAKI BALIUS2, KAWASAKI BALIUS2, KAWASAKI ZXR250, KAWASAKI BALIUS2
Not for BALIUS.
When you search Service Manual for BALIUS, basic version and supplemental version will appear. Normally, when you buy the basic version, you think that it will be basic first, the service manual of ZXR 250 will arrive. Even if you think you made a mistake, this is correct. As for BALIUS there is no need for anything.
Perhaps because the Engine is the same, I think that it will be necessary only if you touch the inside of the Engine. Other than that is not necessary. By the way, this service manual does not come with the BALIUS picture of BALIUS. This is exclusive to ZXR 250.
For those who just ride on ZXR 250, the price is also cheap and very good.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000, KAWASAKI Z1000 (water-cooled)
Used for Z1000
- It is not extravagant SMART
- Attached with Double-sided Tape (Included)
- Material : Plastic
- Quantity : 1 Set of 3pcs. (Quantity : Pair (for Left and Right) )
As mentioned above, Material : Because it is Plastic rod material Manufacturer Material : It does not compare with Aluminum's products, but liked the place where Design does not collapse even when worn with Simple.
Although it feels a bit expensive,
Double-sided Tape is also included, and Quantity : 1 Set of 3pcs. , I think that it is a reasonable Gold amount in considering that it is an OEM.
I think I will use it with a combination of this and an outside Slider.
View detail
Satisfied normally
I put it on Shield too. When sticking to Helmet's Shield etc., each shape of Shield (Curve) There is a case that it does not match with R of De Fault of this Sticker. In such a case, you can decide the middle and paste it in the best position by staggering the angle according to Shield's R from the middle! You may have a little hang (Lol) It is Miso to decide the center of the whole and paste it from the center to the outside ☆
View detail
I pasted it on the back bike
I also like ZEPHYR, but I also like ninjaSeries. But since I can not buy ninja I thought it at least I pasted it on my bicycle. Just sticking ninja or kawasaki logo sticker makes me feel as if I am on the ninja 1000, I can not say that, but I feel satisfied for some reason.
I think that it may be stuck on a bicycle.
View detail
Parenthesis OK
Together with the exterior black, I tried Emblem as Gold. Double-sided Tape makes it easy to paste. Because it is made of a soft Material, it is also possible to bend a little, so you can stick it to the curved surface without problem. Black Tank has Gold color Kawasaki character, the highest is Cool.
View detail
This was the first time I order spares, It did took lot of time to reach my doorstep, thanks to indian custom, The accuracy, perfection and colour match are three words I defined, a perfect match 10/10, 1: all fitting marked well 2: class packing to a
This was the first time I order spares, It did took lot of time to reach my doorstep, thanks to indian custom, The accuracy, perfection and colour match are three words I defined, a perfect match 10/10, 1: all fitting marked well 2: class packing to avoid damage 3: diagram to help you do it yourself I am glad and have told all my friends to get their spares from this website. View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Z250 (2013-), KAWASAKI Z250, KAWASAKI Z250
For Kawasaki Z250, equipped a single seat cover kit. It's an official product, so installation was easy. Except, to return to a normal seat, you'd have to remove two bolts and a part specific to the kit. This may be the one troublesome par
For Kawasaki Z250, equipped a single seat cover kit.
It's an official product, so installation was easy.
Except, to return to a normal seat, you'd have to remove two bolts and a part specific to the kit. This may be the one troublesome part. So, 4stars.
Well, it only takes about 5 minutes.
The color was a flat ebony, and I wanted more accent to it, so I made and pasted the "kawasaki" and the "kawasaki logo" using a cutting sheet.
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Versys 1000, KAWASAKI Versys 650, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Versys 1000, KAWASAKI Versys 650
A total price should go up to 85320 yen if you buy all from genuine manufacturer's product. But you could save some money(23000 yen) by the following order. I bought an unpainted black of V35NT for 47892 yen at another store. And I bought a pure cover fo
A total price should go up to 85320 yen if you buy all from genuine manufacturer's product. But you could save some money(23000 yen) by the following order. I bought an unpainted black of V35NT for 47892 yen at another store. And I bought a pure cover for 14 or 497 yen on we bike. Total is 62389 yen. (There are some disadvantages in that a maker logo color if it is in transparent or in red , and a cover remains vainly.)
Although there is a way of lowering the price by hand painting, a total cost of all colors and materials becomes much more expensive. So, I decided to purchase an original manufacturer's product.
Installation should finish within 5 minutes by removing several screws and retightening them. It is slightly regrettable that the edge portion of paint has burrs a little.
View detail
I found it at a bike shop and fell in love with it at first sight. Its retro design and bluff logos are awesome. KAWASAKI emphasizes on manufacturing motorcycles with retro designs such as Estrella and W800, so these stickers match the body na
I found it at a bike shop and fell in love with it at first sight.
Its retro design and bluff logos are awesome.
KAWASAKI emphasizes on manufacturing motorcycles with retro designs such as Estrella and W800, so these stickers match the body naturally.
I sticked it to the seat cowl of my KSR2 and it looks great with the early 2 stroke machine design. The logos are awesome as well.
The texture is not bad. I think it's tough enough for a cut-out sticker. And its designed in detail with cut off edges. It's just what you'd expect from an OEM product.
I recommend it if you like the design.
View detail
Fits: KAWASAKI ER-6n, KAWASAKI Ninja 650, KAWASAKI NINJA400
It is a backseat exchange commemorative photo. It is easy assembly and installation. Since there is no person to put on back for the moment ... ('; д;) Sad -- In the case of a long touring, it is due to remove. Additionally, it is understood by
It is a backseat exchange commemorative photo. It is easy assembly and installation. Since there is no person to put on back for the moment ... ('; д;) Sad --
In the case of a long touring, it is due to remove.
Additionally, it is understood by a picture, there are a little crevices in between the body and covers.
I think that this is probably specification. I should not have to worry!? Is it just me?
View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Z250 (2013-), KAWASAKI Z250, KAWASAKI Z250
Fits perfectly on the new Ninja 300. Easy to install as the instruction manual is provided. Quality is really good as compared to others.
Fits perfectly on the new Ninja 300. Easy to install as the instruction manual is provided. Quality is really good as compared to others. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000, KAWASAKI Ninja 250, KAWASAKI Ninja 250SL, KAWASAKI Ninja 400, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja H2 SX, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-6R, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI Z650
Bought together with an appicable smart bag. The bag was designed with the presumption that a panel assy would be attached, so I think is a crucial item. You install and put it in place using the six holes for the screws, but it's a bit stiff to p
Bought together with an appicable smart bag.
The bag was designed with the presumption that a panel assy would be attached, so I think is a crucial item.
You install and put it in place using the six holes for the screws, but it's a bit stiff to push through.
If you would widen the hole with an ice pick or something, it would be much smoother.
Since you're putting plastic onto cloth, the panel would creak.
So if you would position three screws first and screw each of them in little by little, it would lessen the chances of the plastic breaking.
But as expected, although high quality, the price is a bit high for two resin plates and six screws...
View detail
It's durable, because it's a 3M product. It says it is durable for 7 to 8 years when used in the outdoor. That's one of the reason why I decided to buy this part.But what motivated me the most was the idea of decorating the wheel area. It's less expen
It's durable, because it's a 3M product. It says it is durable for 7 to 8 years when used in the outdoor. That's one of the reason why I decided to buy this part.
But what motivated me the most was the idea of decorating the wheel area. It's less expensive than painting the whole wheel. And although it's just about adding a thin single colored line to the mostly black area, it changes the appearance drastically. I know that there are similar products of another brand, but I like this part for it has a small "KAWASAKI" logo on it, which is unique.
You better paste it with water. It says to refer to the website for further details, but to make the operation easier, you better have a rear stand and a front stand. It will take time even if you have all of those, and I think it's better for you to take your time. If you are not confident or if you don't have time, you might as well consult an expert for this operation.
It maybe counted as a sticker tune-up, but still, it's more expensive than other products. 3M decal sheets tend to be this way. I think it is better than to have a cheap product that gets off easily, but each person may have different views.
View detail
Thank for webike japan. the single seat has arrived. the built quality for this single seat is very good. very precision. Easy installment
Thank for webike japan. the single seat has arrived. the built quality for this single seat is very good. very precision. Easy installment View detail
Since it is the same Size as the pure Logo in a Front cowl, it sticks and a feeling of unification comes out by a place. As for structure, there is a high-class feeling for high quality dramatically.he dares to say -- if it becomes -- the attachm
Since it is the same Size as the pure Logo in a Front cowl, it sticks and a feeling of unification comes out by a place.
As for structure, there is a high-class feeling for high quality dramatically.he dares to say -- if it becomes -- the attachment intensity of double-stick tape -- a few -- insufficient mind -- I feel that it is clever.If an attachment place is not degreased and stuck by a Parts cleaner etc., it may drop out before long.
We can recommend you a petit Dress-up up.
View detail
When pasting up and washing the Emblem of Team Green only with an Iron last time, it judged it as the strongest that an end separates for a while, furthermore sews on too.Although sewn on by hand-sewing at the beginning of , it is hard to sew with a p
When pasting up and washing the Emblem of Team Green only with an Iron last time, it judged it as the strongest that an end separates for a while, furthermore sews on too.Although sewn on by hand-sewing at the beginning of
, it is hard to sew with a part with the thickness of an Emblem.
It is the appearance of the Sewing machine of mother my regular use there!
I think that it will go also by an amateur well if it does slowly.
What does the next to which attachment of an Emblem is becoming more interesting and more interesting buy?
View detail
Delivery was quick, had to pay a lot extra once it arrived due to import tax etc. in reality nothing to do with webike and their service, but with the regulations of my country. I have yet not mounted the emblem, maybe when I choose to repaint the bike. T
Delivery was quick, had to pay a lot extra once it arrived due to import tax etc. in reality nothing to do with webike and their service, but with the regulations of my country. I have yet not mounted the emblem, maybe when I choose to repaint the bike. The emblem turned out to be better than expected, nice and crisp in its appearance and sufficiently soft to be formed without cracking or breaking. View detail
The Tank emblem of W650 was not pleasing, and it purchased and attached this product. It matches to W650 well very well by a traditional Design.attachment is easy only by sticking with double-stick tape.Since it can curve according to the curved s
The Tank emblem of W650 was not pleasing, and it purchased and attached this product.
It matches to W650 well very well by a traditional Design.
attachment is easy only by sticking with double-stick tape.Since it can curve according to the curved surface of the
Tank, a feeling of a Fit is also high.
View detail
The Camera was put into the Pocket of a Jacket, and when it took the photograph under run, etc., there was fear of fall and it was not able to do it until now.if [ when it participates in a mass Touring , however before / if it witnesses taking the ph
The Camera was put into the Pocket of a Jacket, and when it took the photograph under run, etc., there was fear of fall and it was not able to do it until now.if [ when it participates in a mass Touring
, however before / if it witnesses taking the photograph during a run with the Camera which the another one carried from the head and he also gets it ] -- it considered and purchased this product.
When it actually attaches to a Camera and hangs on a head, since the Camera is heavy, there are quite a few burdens on a head.
Since connection of a Strap part and a Neck Holder part can detach and attach easily by a cheaper Connector again, it worries about whether it falls during a run.
It is kind, when separating from a head and taking a photograph on the other hand.
View detail