Reviews
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE+(ZX1002DKF), KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SX SE
Easy
This is an absolutely necessary Parts when attaching SIDEPannier to H2sx.
It's easy to do
All you have to do is to put the seal and turn the screw, so if you have a tool and a screw lock (a strong one) and follow the instruction manual, anyone should be able to install it.
To be honest, I think 15,000 is a bit expensive for 2 pieces of iron and a seal… I hope it's at least 10,000!
View detail
Fits: KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 650, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI VERSYS 1000 SE
A little additional work was needed.
My Vehicle (z1000) I had been using a holder from KIJIMA as aftermarket parts, but it was troublesome to have a different key from the one used for the motorcycle, so I decided to make it a one-key key.
The cylinder size was perfect, but the size of the joint with the lever part was different and had to be adjusted.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX)
Be careful not to slip through.
It's an OEMOption Pannier.
You will need to replace the Grab Bar to install this.
It's just OEM and it's clean after removal.
The fixation is also secure.
You need a key to remove it, but it might be good for Security.
Screw may come off because the attachment part of the opening stopper is weak.
The Pannier extends to the full width of the Handlebar, so be careful not to slip through.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000, KAWASAKI Ninja 250, KAWASAKI Ninja 250SL, KAWASAKI Ninja 400, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja H2 SX, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-6R, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI Z650
Cospa evil
At Ninja 250, it installed in Smart Bag of the company.
Although I thought why it is so expensive though it is just a ColorPanel, Plate of the same shape as this Panel has become a Screw stopping structure with the Bag fabric sandwiched from the Reverse side, a little consent.
Whether it is partly attributable to not posting this back Plate in any product image.
Both making and quality are satisfactory only with OEM, but this ColorPanel itself is not a particularly strong part, so I do not think that the above-mentioned back Plate is needed separately.
That much Reduction in cost (Half power level) Will it be? Kawasaki.
It is a story of Smart Bag Body, but Smaller than you imagine Smaller loading is limited by Wallet and Cigarette and lunch box.
And when it comes to the shape of the premise for mounting this Panel, it is slightly more expensive that the total amount of Bag + Panel is about 23000 against that loading amount.
Even this Web! Ke is Manufacturer fixed price selling.
Also, I hope you post all colors properly.
I did not understand well so I made Candy lime green, but it was Green Light with Lame.
Car body (Ninja250 KRT) It's different from Lime green in..
I should change it to BugStar..
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX)
As desired
At the purchase store's Catalog, we purchased 97,000 yen including tax and purchase it here.
Buy Panny + Cover + One Key Rotor at the same time.
Stripe, like this Rim tape, did not buy it as much as 5,000 yen, but it seems like a thick resin Parts, I regret a bit.
There is only OEM Parts Number, making it solid, making installation to the car body possible in a few seconds, I am very satisfied.
The width at the time of installation is about the same as Handlebar and attention must be paid through.
It seems that PannierCover is screwed from the back and Stripe is fixed with Double-sided Tape.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI Ninja H2 SX, KAWASAKI VERSYS 650
Although it looks bad if it does not exist...
Buy Candy Lime Green with Pannier case.
Mounting is done by screwing about five from the back, making - I am firm with both the fitted feeling.
Even if there is nothing, it seems that performance will not be affected, so 15,000 yen is expensive.
OEM Parts Number It can not be helped.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000, KAWASAKI Ninja 250, KAWASAKI Ninja 250SL, KAWASAKI Ninja 400, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja H2 SX, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-6R, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI Z650
Bought together with an appicable smart bag. The bag was designed with the presumption that a panel assy would be attached, so I think is a crucial item. You install and put it in place using the six holes for the screws, but it's a bit stiff to p
Bought together with an appicable smart bag.
The bag was designed with the presumption that a panel assy would be attached, so I think is a crucial item.
You install and put it in place using the six holes for the screws, but it's a bit stiff to push through.
If you would widen the hole with an ice pick or something, it would be much smoother.
Since you're putting plastic onto cloth, the panel would creak.
So if you would position three screws first and screw each of them in little by little, it would lessen the chances of the plastic breaking.
But as expected, although high quality, the price is a bit high for two resin plates and six screws...
View detail