Reviews
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Easy to see remaining amount
It looks SIMPLY good. I am putting Green Fluid in this.
Depending on the distance of the MASTER plug, it may be necessary to cut the Cup plug.
I used bremboRCS, so I cut the hose and connected it with a mesh hose. (Rubber hose is recommended)
I use it for the clutch and brake, but this time the cap on the brake side flew off while driving. So I bought an additional cap. I think everyone should check the tightness of the cap once in a while.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Nisshin radial brakes to Clutch
I use Nisshin's Radial masterBrake and Clutch both.
I think it would be cooler to match the size of Both SidesLarge.
[Color] Smoke is cool and works well with KaEraserd.
Note that the diameter is different from brembo.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Reserver tank for Ninja 1000 Rear brake
It's just a look
Tank was also changed while changing Fluid!
Is it a little easier to see how dirty it is now? It's about the same.
The installation work can be done by anyone who can bleed air.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Installed on GALE SPEED's MASTER
I saw a story on the net about the diversion of the H2OEMTank and installed it on the MASTER of GALE SPEED. The difference from the original brembo is the thickness of the nipple.
The nipple of this OEM Tank is thicker than brembo's and it is Nisshin compatible type.
Quantity of Master tank, Cap, Diaphragm:Set
By the way, all the Rears were sold Rose.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
With hydraulicization
I used Kawasaki OEM Master cup for my GSXS1000F with hydraulic clutch. View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
PetitCustom
I use it for a separate Master Cylinder.
It is ExactlySize in the Radial master of F-Landow.
Can be used for Nisshin
It's cool to add Green Fluid!
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Caution
Hose insert is the same Φ7 as Nisshinetc.One sizeLarge than 6Φof bremboetc.
Please be careful if you plan to exchange.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
To improve the texture of the ZZr1400
I bought it with the Oil Tank to improve the texture of the Handlebar area of ZZr1400 It is a little bit difficult to handle Because it is not with a pon, it took some time to handle the bracket and tube It turned out to be just as good as the price of putting a NORMAL tank in it I think it's Ali View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Cooler than a milk white tank!
Used on YZF-R125'13's rear brake masterTank
Originally it was the H2 Clutch masterTank, but now it is the RearBrake fluidTank Diverted as
Hose length can be extended or
The additional bracket was installed with the degree of adjustment to prevent hose leakage
I thought about diverting the H2's rear brake masterTank, but
The installation was going to be a lot weirder, so
I'm now glad I diverted the Clutch masterTank
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
As expected
Used for Master Cylinder of Fand.
High transparency [Color] You can check the status of Fluid more easily with SmokeCup.
Because it is Kawasaki's OEM Parts, it can be used with confidence.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Custom feeling Up.
Recommended by Shop, because it is popular and purchasing.
Buy at the same time as vehicle inspection Brake side purchased same as Clutch.
Quantity : Pair (for Left and Right) It became a nice feeling that the Large of Tank 's Tank gathered.
Oil quantity can be seen at a glance and very good.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Attached to Cland master of Radar Pond
【What made you decide the purchase?】
Purchase w because you will not miss the fashion
Good price is also good!
【How was it actually used?】
Good amount of Fluid can be confirmed at a glance!
【Was it difficult to install? (Hard parts case)】
It was troublesome to bend the mounting bracket many times to align the tank in order to set it properly. Reserver tank hose is Nisshin's inner diameter 7. 3 mm, outer diameter 13 mm was used.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Tank should be installed horizontally as much as possible.
[Is there anything I was disappointed about?]
None.
【Hope for Manufacturer - Please let me know if you have any improvement points]
As we can sell, do not raise it secretly w
【Have you compared items?】
BremboOEM 's Black Tank is dismissed as the diameter of the Hose attachment is as thin as 6 mm. Since the diameter of the Hose attachment part of the Radarphone of the land is 8 mm, it does not match with brembo OEMTank.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
I exchanged with Brake master at the same time
I replaced it with Tank of Nisshin's Clutch master. Master cylinder remains Nisshin. Especially installed and used without problems. Since Fluid can be seen through, I tried to make Fluid of Green color. I am satisfied with my self but I am fluent in Large. Someday it is regrettable that I think Cup will deteriorate over time and become cloudy, but I will purchase the same one again.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
To Imechen around Handlebar.
KawasakiOEM (Lol) However, since it is the same shape as bremboS 20 Tank, it is planned to be replaced as it is to GSX 1300 R HAYABUSA.
Do not use Large-grained ReserverBrake tank, Clutch tank is the same shape before and after, Quantity : Pair (for Left and Right) It seems that it can be used symmetrically. Bracket will be replaced with DMVFlexibleBracket and Fluid will be replaced by Green's Active.
View detail