Reviews
Nice but a bit small.
Nice simple design. It compliments the pattern of the stock seat. It's a bit on the small side, so correct placement is key. A bit bigger would have been good. Make sure it covers the area where your belt buckle might contact the tank during normal riding. Also, be sure to fit it while the bike is level..either use the centre stand or paddock stand. View detail
OEMParts
The knee bites firmly when Cornering!
OEM only, no deterioration even after 2 years of outdoor storage
View detail
Since it is an OEM
Other Brand Products are large, thick, and OEM. View detail
Good size for light motorcycles, small size for large type.
The size is small, so it was easy to install.
I think it is too small for a large motorcycle. Just fit for light motorcycle.
I thought it was a Size feeling to do so. Anyway, Tank Pad should be degreased and installed on a warm day.
It is possible to use Dryeretc. to force the paste, but it is not impossible.
It is better not to put it on in winter (it peels off easily).
It will last longer if it is applied on a day when the temperature is above 20°C (68°F).
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI Z400, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Z250, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250
Not too flashy, blends in well. A little expensive though.
[How is it used?
Protects the chest as it rubs against the Tank when lying face down.
Was the installation difficult?
It is easy, but the adhesive is strong, so it is difficult to reapply unless the location is firmly determined before applying the adhesive.
How was your experience with it?
Compared to cheaper Universal Chinese products, the quality is better for the price, it is harder to peel off, and it feels more integrated with the car body.
I am glad I chose this product because I don't like too flashy Tank Pad.
[Notes]
Since it is attached to the top of the tank, the border between Seat and Tank and the part where the fastener of the Pants might touch are not covered. If you are concerned about this, it is better to prepare a separate pad or attach a scratch-preventive film.
View detail
Fuel Tank Scratch Prevention
I had the same one on my previous Standard, and I went to look at some other brand products, but I like the OEM one. The color matches the car body, so it is not noticeable. I don't know about the functionality, but I think the tank is protected. View detail
Good only for OEMs.
OEMTank Pad has a LusterLuster surface, but this one is Luster-less and a little harder material.
You may have your preference, but the Design is also a cool MATCH. I think it is also effective in preventing scratches.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4RR KRT EDITION, KAWASAKI Ninja ZX-4RR 40t Anniversary Edition
The fit feeling is good.
I like it because it looks very OEM and the fit is very good. View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4RR KRT EDITION, KAWASAKI Ninja ZX-4RR 40t Anniversary Edition
OEMTank Pad
I originally preferred it without the Tank Pad, but bought it because I gradually felt like I was missing the Tank.
I was torn between this product and Universal, but I took the plunge and went with this one because it seemed to have a better texture. I am satisfied with the thickness of the texture.
I applied it by myself, but it was difficult to apply it straightly because it is divided into upper and lower sections.
View detail
Fits: KAWASAKI Z H2, KAWASAKI NINJA H2 SX, KAWASAKI Ninja SE+(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002BKF), KAWASAKI Ninja H2 SX(ZX1002AKF), KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE(ZX1002AKF), KAWASAKI Ninja H2 SE(ZX1002BKF), KAWASAKI Z H2, KAWASAKI Z H2 SE
ManufacturerUniversal Product
It's an OEM pad, and it's good, but it's a Universal Product, so it's not as large as it could be. View detail
Tank Pad
Than I thought, Size was Small, but around the Tank. (Where the navel touches) It seems to help prevent scratches on the Also, it looks better. View detail
Fits: KAWASAKI Z H2, KAWASAKI NINJA H2 SX, KAWASAKI Ninja SE+(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002BKF), KAWASAKI Ninja H2 SX(ZX1002AKF), KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE(ZX1002AKF), KAWASAKI Ninja H2 SE(ZX1002BKF), KAWASAKI Z H2, KAWASAKI Z H2 SE
Per Motorcycle Repaint.
I installed this pad on my Z H2, when I first bought the motorcycle I had a Carbon pad from Amazon, but I changed it to this pad because I repainted the color of the motorcycle, and it looks good with the Matte color.
The adhesive of the seal is also fine, and if there is a drawback, it is a little small, it is unavoidable because it is a universal product, but in general, I am satisfied.
View detail
Safe and happy!
When I bought NINJA1000SX, I had ordered OEM Tank Pad, but it was undecided to deliver, so I didn't want to put Wound on my new car, so I lost my way and bought this safe product.
The NINJA1000SX 21 year model Green Light has a black tank with Green Light stripe on it, so it's a shame that you can't cover the area between it and the seat when you put it on.
View detail
Fits: KAWASAKI Z H2, KAWASAKI NINJA H2 SX, KAWASAKI Ninja SE+(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002BKF), KAWASAKI Ninja H2 SX(ZX1002AKF), KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE(ZX1002AKF), KAWASAKI Ninja H2 SE(ZX1002BKF), KAWASAKI Z H2, KAWASAKI Z H2 SE
Like a de Fault setting. (Lol)
[How is it used?
Currently in use. It has been six months since it was installed.
Was the one you received as per Image?
The design is simple and functional, and the image is chic with low gloss. I mean, it looks like ZX-14R OEM Parts. (Lol)
How was your experience with it?
With a crustacean-like 3D design and a moderate size area, the effect can be expected as a protection function.
This is not a Tank Pad with a flat and flashy pattern like Option or ThirdParty products, but rather a three-dimensional and functional design, and the chic feeling of the matte color is good like OEM Parts.
[Points to note]
It is molded to fit the shape of the tank, so of course it will not fit the Ninja 1000 perfectly. It looks like it's warped up. We recommend using a Dryer to warm up the crimp and let it sit overnight. I didn't use Dryer because I put it on in the summer, but after crimping it by hand, I put Gum Tape on top of it and let it sleep overnight.
How did it compare to other products?
The general Tank Pad is a thin plate, the shape like the leaf of the fern, and it is not the object of comparison because there are many things of a gaudy pattern and it did not like it, but I think that the price is not so different from these products, and the cost is high if it sees it from the quality.
Other items that would be helpful
It would be nice to have a pattern to give the Tank a mounting position, but it's not a product set up for the Ninja 1000SX in the first place, so it's something subtle.
View detail
Easy to match with Lime Green
A perfect match for Kawasaki's Lime greenTank.
It's more of an Image that improves Design rather than seeking performance.
Material is a double-sided tape image to be pasted with rubber nature.
View detail
The shape and Material are good.
It can be installed in the Fuel Tank of any shape or any color in Parenthesis well. It prevents the Wound of the Tank firmly, and its function as a Tank Pad is high. View detail
Design is Parenthesis okay.
It is recommended to the person who likes Simple. View detail
Fits: KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION
Its purpose?
The surface is smooth
I bought this to prevent slipping when knee-gripping, but I didn't feel the effect
Is it a scratch-proof Pad?
View detail
Fits: KAWASAKI Z H2, KAWASAKI NINJA H2 SX, KAWASAKI Ninja SE+(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002BKF), KAWASAKI Ninja H2 SX(ZX1002AKF), KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE(ZX1002AKF), KAWASAKI Ninja H2 SE(ZX1002BKF), KAWASAKI Z H2, KAWASAKI Z H2 SE
COSPA ◎
I put it on a 2019 Ninja 1000
Simple but not cheap, and that's as good as the OEM I wanted a Tank Pad that wasn't too flashy, so this was just the right product for me
However, it's short in the horizontal direction, and the area is a little insufficient to prevent scratches on the Tank I do not recommend it for your purposes
Because it is OEM, if it wants, at least the logo of KAWASAKI has been put in even if it is Small work I wish I could have done that
When you apply the seal, you need to peel off the two warning seals that were originally attached
It's put on top of ClearCoat, so you can use Dryer to warm up Seal I used a BusCard instead of a scraper to gradually peel off the edges and peeled off the remaining glue I flattened it with Seal to make it Beauty It is wiped up lightly with Dustcloth which was sprayed with Parts cleaner to finish (If you are worried about damage to the paint surface, we recommend you to use a special seal remover
View detail
We also got to Z125PRO!
Looking at the picture of Net, it looks like Large, but when you check Size (Scaled pictures were useful!) It was Large Kimito attached.
"warning" Peeling off Seal was hard.
I felt it was stiff but cleanly stuck along the Tank's Curve.
View detail