Reviews
Nice product
Hi there, this is a great product and the quality is great, my bike looks even cool after installing it. I recommend this product. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R 40th, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-6R KRT EDITION
Seat Cowl
Buy this OEM seatcowl, don't settle for cheap knockoffs. This seat cowl is very secure, fits perfectly, once it locks, it wont shake or come off. Comes with the toolkit compartment so you can still use and carry all the tools under the original seat. Instructions on how to assemble it are clear. Color matches perfectly with my zx6r. View detail
I want it installed by OEM.
It does not sacrifice footing and does not cause pain in the buttocks.
I would appreciate it if I could choose high or low when purchasing a new car.
View detail
I don't have pain in my buttocks, but ….
The cushion is good and there is no pain in the buttocks, but since the width is wider than the Standard Spec., the soles of the thighs and the base of the feet are compressed and it is slightly difficult to lower the legs.
The effect of the difference in height is not felt very much.
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250
To relieve buttock pain...
I decided to purchase the Normal seat because it was too hard to drive for a long time in the Normal seat.
It is not as cushiony as I thought it would be, but I can get a couple of hours more out of it than before the replacement.
I don't get butt pain. Of course...
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
No problems with installation since it is OEM.
I purchased the single seat cover because I do not ride two people and do not carry luggage.
Installation is easy, as an Instruction Manual is included.
I am satisfied with the Large change in style after the exchange, but I think it is inevitable that the color tone is different due to the difference in reflections, as the Green Light of Tail cowl is a Sticker. I don't mind, but I have attached a photo for your reference.
Other Brand Products were inexpensive, and there were Carbon Style and many other colors, but I did not purchase them because I did not know the quality until I received them.
View detail
It's a replacement for comfort.
With OEMSeat, my butt starts to hurt after about 30 minutes of riding, so ….
High seats were introduced to improve the situation.
Cushioning has been increased, sitting is more comfortable, and the pain that occurs has not gone away, but it has improved considerably.
In exchange for comfort, the footing was only slightly worse because of the increased thickness.
View detail
Fitting is only possible with OEMOption.
The tandem seat is used only for the occasional SeatBack, and there are no opportunities to tandem the seat.
The removal and attachment is the same way as for the Tandem seat, so you can change it to suit your needs.
However, the Z900 has a better straight line Line with the Tandem seat than the Tandem seat, so it seems that there are different tastes in terms of appearance!
Fitting when installed is as expected of an OEM option, so it fits nicely.
If it were a little less expensive, it would be perfect.
View detail
Z900Rs OEM High Seat
Incredible fast shipping time of three days from Japan to North Carolina,USA! An amazing effortless order process and arrived exactly as described. Five stars on this purchase. View detail
Well, okay, I guess.
I used to ride with the anchorage removed and gels inserted in that area, but I was still having trouble with my buttocks being tight on long distances.
I bought this Seat for a trial run and drove it 300km a day, down the road and on the highway at a ratio of about 8:2, and the cushioning and other features are better than the previous one.
The sides have been shaved to allow for footing, which reduces the area of the top surface, so I felt some partial pressure on my buttocks, but not so much that I could not stand it.
Replacement was easy.
Overall, I would say that the overall cost-effectiveness is fair.
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250
Pain measures for buttocks and Riding Position change
I bought the Original Seat because my butt was getting sore after an hour of riding and I couldn't stand it after 2 hours of continuous riding.
The high seat raises the seating position and makes it easier to get a good footing, and at the same time, the riding position is a little more forward leaning. I can ride for 2 hours straight and my butt doesn't hurt as much as before. I think Gel Zabu is more effective in preventing pain, but I recommend Gel Zabu because it looks better and the cushion is moderately hard and holds well because it is OEM parts.
View detail
The shape is more unusual than I expected.
It is wide in appearance.
The shape of the tip has also changed.
Does the top surface look flatter on the New Model?
The New Model is a little stiffer to the touch.
I think the pattern will fit 20-21'.
I think people have their own preferences for ride comfort, but I liked it.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
Simple and SMART.
We installed a Single Seat to make it cool mainly for circuit purposes.
Manuals are included for installation, but it takes a lot of hang to install the rubber part.
The lower part of the Rubber should be installed in such a way that it bulges out.
If you get a good look at the Rubber part, there is a groove carved into it, so you need to pull it until it hooks into the groove.
For pulling, Pliers and others are easy to work with.
You can pull it as hard as you want.
Also, the Silver colored Bracket in the photo has an orientation. If you bring the convex part in the direction as shown in the photo
The Seat will float quite a bit. The gap between the seat and the seat is so wide that a small finger can pass through it.
This area is a hang that is not described in the Manual.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
No one gets on it (laughs).
Quantity at the time of delivery because I don't intend to put anyone in the back (laughs).:Set and registered as a single passenger. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
Wow that's cool
I think it looks very cool and the modeling is very elaborate.
Installation
Attach Damper or Bracket on Cover side
? Remove the Tandem belt from the body side
? Attach the fixture to the car body side.
and easy.
There is an Instruction Manual, and installation was Smooth even for a beginner like me.
The Cover was also fitted with in-vehicle tools, which was a nice touch by ManufacturerOEM.
After installation, it is stable with no wobble.
View detail
Fits: KAWASAKI NINJA250R, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Z250, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI Z400, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI NINJA400 (2014-)
more comfortable riding
My motorcycle is KAWASAKI Z400 2019. Since I am tall, the original seat height is only 790MM, and I feel uncomfortable after riding for a long time, so I bought this original high seat cushion kit on webike. The seat height can be increased by 30MM, and the comfort of the seat cushion has also increased a lot, reducing the fatigue of riding. -------------------------------------------------- -------- My motorcycle is Kawasaki Z400 2019. Because I am relatively tall, the original factory is only 790mm in height. It feels not very comfortable after the riding time, so I bought this original high -cushion kit on Webike. It can increase the sitting height of 30mm, and the comfort of the seat cushion has also increased a lot, reducing the fatigue of cycling. Powered by Google Translator View detail
It's easier to ride!
I think the ride, feel, etc. are as good as the previous buyers have said.
I think it will be comfortable once it gets accustomed to your buttocks.
I'm glad I bought it!
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250
For those who have butt pain with Normal seat of Ninja400
I had a pain in my buttocks when touring long distance with Normal seat, so I changed to High seat and now my buttocks don't hurt when I take a rest moderately during touring about 4 to 500 km. If you are a person who has a sticky foot, I think you can stand on both toes or a mother-fingered ball.
No tools are required for replacement, just replace the normal seat.
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250
Reduced pain in the buttocks when touring.
The cushion thickness of the normal seat was thin, probably to lower the seat height, and my buttocks hurt when riding for a long time during touring, etc. After replacing it with the high seat, the buttock pain was considerably improved.
Seat height will be 2-3 cm higher, so those who are concerned about footing should refrain from purchasing this product.
View detail
I just bought z900rs high seat!
My z900rs OEMSeat started hurting my butt within an hour of riding and I had no choice but to buy a high seat. I am not sure yet since it has been a short time since the change, but I think they are much better than the OEM ones. If this doesn't work, I will have to have it modified at a seat shop. I am 184cm tall, so I have no problem with the leg height. View detail