Reviews
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE
I don't know who to complain to!
Only one point of dissatisfaction.
I've got a bad one - I've got a bad one.
(o^^o)
View detail
Sticker
I bought a Sticker to put on my Helmet, Parenthesis good ?? View detail
Fits: KAWASAKI Z H2, KAWASAKI NINJA H2 SX, KAWASAKI Ninja SE+(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002DKF), KAWASAKI Ninja H2 SX(ZX1002BKF), KAWASAKI Ninja H2 SX(ZX1002AKF), KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE(ZX1002AKF), KAWASAKI Ninja H2 SE(ZX1002BKF), KAWASAKI Z H2, KAWASAKI Z H2 SE
Select a shape
I purchased this for use with CLEVERWOLF's Tank Cover, but the bend was too tight to use.
Because of its hardness, it can only be used with a wide, flat-shaped tank.
Furthermore, due to its hardness, there were multiple thin abrasions on the surface from the time of purchase.
If the shape is right, the design and original texture are good.
View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE+(ZX1002DKF), KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE, KAWASAKI Ninja H2 SE
OEMOption Screen
[Color] I wanted Smoke or there was no Design that I liked at the time of purchase, so I chose OEMOption.
Wind protection clearly has a Minus effect.
The screen was lowered, so at high speeds, the wind was strong from the shoulders up, which was Large.
I plan to replace it when I find a design I like.
View detail
Sounds good
At first I thought I made a mistake because it was hard to tell the direction and front and back, but after I successfully installed it, it is Simple and I like it very much.
I would definitely recommend this one over the Pillion Bar that surrounds the GRU Li and Seat perimeter like the OEM.
View detail
get on well with (someone)
I exchanged Tanks, so I decided to use the same one as before. I still prefer pure raw. View detail
I prefer OEMs.
The design is normal and there is nothing special about it, but I think that's a good thing. View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI Z400
Paint is quite clean. Just difficult to install.
To install the bolt, we need to insert the bolt into the hole in the frame under the tandem seat, but the cowl and the screw head interfere with each other and the tool does not fit. Therefore, the cowl must be at least a quantity of:1 Set of 4pcs. Note that you cannot access to the cowl of Rear without removing the cowl. Unless you have very special tools and skills, it is impossible to install the bolt. It is a shame because the hole position is perfect and the installation feels integrated.
Frankly, I don't think it can be installed in 30 minutes.
I think the black part of the Center is a bit cheap.
View detail
I'm satisfied with how it looks.
I installed this on a 2016 LE, installation is easy, takes about 5-10 minutes to complete the replacement.
There is a large difference in the appearance from the time it was applied, the time performance is excellent, and the shining power of the plating has changed the impression.:The difference in texture from the black plastic cover and the power of the reflection from the shine of the plastic is tremendous.
But Material:I haven't weighed it, but the SteelPlating cover I installed this time is made of Material:It weighs about 10 times as much as Plastic, and I felt that things were different.
Since this is not a MotoGP machine where the weight under the spring is important, I installed it just for looks. I think the texture of each and every part of the W800 is more suitable for the atmosphere, so it would be a shame not to add the SteelChain Cover. It was a shame not to add the SteelChain Cover.
Material:The texture and workmanship is beautiful, and the brilliance of the plastic was a perfect match. By the way, ESTRELLA's cover was made like hand-finished.
Please note that the installation screw for the Plating cover is not included in the package.:I reused the black screws from the Plastic era.
Is Mr. Han Kawasaki also a CostCut in the current trend?
View detail
Fits: KAWASAKI Z250, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI Z400, KAWASAKI Z H2, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja 650, KAWASAKI VERSYS 1000 SE, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA250R, KAWASAKI Z650, KAWASAKI NINJA400, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650
It takes some getting used to.
The H2SXSESeries has tape on the inside of the wheel rim, but I wanted to put it on the outside of the wheel rim as well, so I chose the OEM product. I used a special applicator to apply the tape, but it was a little dizzy and unstable at the beginning, so it was difficult to draw a beautiful circle.
The green color is a little bright because it matches the Lime green body, but I think it is not so strange.
View detail
Tank Pad
Design, the textures are great!
It would be perfect if it was a little larger.
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI NINJA250R, KAWASAKI NINJA400, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 1000 SE, KAWASAKI Z H2
Fashion starts at the feet! I'm tighter.
[How is it used?
I wanted to tighten up the suspension, so I used Rim tape to make a chain.
Cowl also has Silver type Line in it, so I made it Silver to match it.
Was the one you received as per Image?
Even if it is called Silver, it is like White, and Color:Gray and Black are also included, so it is a little plain.
I might have wanted a bit more sparkle and reflection.
Was the installation difficult?
No way straight Tape is 1 pc per Tire1 pc…
I thought it was a Tape that was curved along the Tire in about 4 sections (like MDF's), so I was at a loss.
But it's not hard to put up, just takes patience!
How was your experience with it?
I'm happy to put it up for now.
I'm going to go touring and wash the car to see the durability.
[Included Parts:were they on?
Nothing, just Tape…
[Was there anything that disappointed you?
What's Rim tape like?
But if it's just a Tape, I think they should offer it at a lower price.
Installation method and point and hang
First, we need to make Wheel a Beauty!
Prepare a mist spray and moisten the area to be applied.
And don't be in a hurry, but little by little, press down with your finger and paste it to make a curved shape.
Apply the tape as if you were pulling it, but be careful not to overdo it!
I didn't think I pulled that hard, but it broke in one place.
After applying, peel off the transparent Tape on the surface and you are done.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
OEMSingle Seat
Single seat cover is very hard to find.
It's called "Cover", but it's a Tandem seat replacement.
Being OEM, it gives a sense of unity and tightens up the area around the rear.
However, as has been pointed out, there is a gap between the Body and the body, and there is a kata when pressed.
When I wash my car, it soaks up a lot of water and I'm worried that I installed it wrong.
If you change the Bracket on the Body side to the opposite direction, it becomes a little better.
However, there is a sense of satisfaction after installation, and I recommend it to those who can feel a kind of brand power in the thing of OEM. I think that the price is also acceptable.
View detail
Wound concealment
ZX12R is Side cover [Tank] Is it easy to get Wound? I thought about painting the side cover, but I used Sticker to hide it. I don't like the flashy Sticker, so I think it's simple and very good. View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R
Design is good. Heavy
For some reason, the Single seat cover was missing for a long time.
The texture is very good because it is the same color as Body.
I thought it would be lighter without the Pad, but it is heavier.
The installation is not a replacement by popping it on, but a part of OEM parts are diverted and replaced.
It takes one step to return to Normal seat.
When installed, there is a small gap between the Cover and the car body.
Apparently, this is normal.
To be clear, there is nothing but a Design-like Merit.
Instead, the design is as cool as you'd expect from an OEM.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION
Dirty paint, troublesome to refit
Grain and dust in the paint, scratches on the surface, and the quality of the paint is terrible.
Lime green is a bright color that doesn't stand out, so I use it as is.
Cushion is heavy because it is made of Rubber. 200g more weight than Normal seat.
This seat cannot be replaced with Normal seat.
Because it was troublesome, I shaved off the Base of Normal seat and made it possible to exchange it.
The contour also floats slightly from the tail cowl, so it doesn't have the same sense of unity as the Single Seat of foreign cars.
Still, it's much better looking than the Normal seat, so I'm satisfied.
View detail
It fits the Lime Green Tank.
It is a good design and the logo of Kawasaki is one point. Of course, it prevents me from getting scratches. View detail
It's a bit of an unusual design.
It's a little bit different in design from other Kawasaki stickers, so you may not like it, but I like it. You can cut out and paste only the text, so you can put it anywhere. View detail
We'll just replace it
Remove the normal seat and put the pad on it and replace it with the high seat
I've been driving an off-road car for a long time and I felt my legs were cramped in the Normal seat, and I bought it because I thought it was less likely to hurt my buttocks as it was thicker The tightness of the seat has been resolved to some extent, but the hardness of the Seat does not change much and my buttocks hurt I feel that the leggedness does not change so much
View detail
good-looking
The seat shape is not the shape to cover the tank, so it is attached to prevent scratches (High) (In the case of the seat, the tip of the seat is shaped like a little tank Easy to install, just stick it on View detail