Reviews
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA X-4
Cancellation method
There is no such thing as a "loss" next to the impresario.
Cancel both pieces.
Mr. Ueda
View detail
I'm a little nervous.
Installation is easy, just swap them in and out. However, it feels shorter than expected, and the STAND-UP is a bit scary.
I guess I'll get used to it.
View detail
Fits: KAWASAKI NINJA1000, KAWASAKI NINJA1000, KAWASAKI NINJA1000SX, KAWASAKI ZRX400, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900RSCAFE, KAWASAKI Z900RS
no problem
It is inexpensive and I don't think there are any leaks.
I just put it on so I don't know yet lol.
View detail
It's less painful and great PARTS!
[How is it used?
I sometimes have pain in the rear part of my foot due to reluctance to move during Shift change, especially when wearing thin fabric shoes, and I decided to purchase these shoes to alleviate the pain.
Was the one you received as per Image?
The Manufacturer name is fancy but the quality is good and the Rubber was soft.
Was the installation difficult?
It was Large strange to remove the Change rubber part that was originally attached. I didn't want to damage it, so I finally cut it off with a Cutter.
Although it is easy to insert, it will be difficult to fix the rubber unless the pedal is attached to the change arm first and then the rubber is inserted.
How was your experience with it?
Comfortable. I was riding in a choice of shoes, which made my excursions easier. I think they will come in handy when Touring for long periods of time.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
If you are aiming for a simple old car look, this is a difficult choice.
▼I am comfortable enough with this shape from NORMAL. I think I will Repeat in the future and will be addicted to it.
View detail
Fits: HONDA CB400SF Revo, HONDA CB400Super BOLDOR Revo
There are some concerns, but Fashion Fat at One Point
What I received was just like the Image!
One point as listed and good in Fashion.
I would recommend this product to others. However, I do have some concerns.
I'm personally satisfied with K-FAC's Parts, but...
When I opened the package to install it, I was surprised to find large scratches and unevenness. I installed it in a place where I couldn't see it.
I like the Manufacturer and plan to buy from them in the future, but I am wondering if there is any inspection before shipping? I am very worried and anxious.
Well, it is not expensive, so it is unavoidable.
View detail
Emphasis on decoration
It was the first product that came out, so I installed it, but it is a little expensive. I was glad that there were no decorative elements in this part, such as the decorative plate on the base or the aluminum collar, which is not visible after installation.
Quantity:Pair (for Left and Right) Note that two sockets of the same size are required because they will be supplied if they are not held from the
I don't know how effective it is because I haven't tipped it over. (I feel that if the bottom case is tipped over in such a way that it is damaged, it would not be enough to protect Axle.)
I think it would be easier to attach and detach if one side is fixed, but I don't know why.:Pair (for Left and Right) It is a hassle because you have to hold it down from the
View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA X-4
Cancellation
Cancellation. How many times do you want me to say it, Mr. Ueda?
You say next to the side imprint of the order confirmation.
I don't know how many times you've had me do the same thing over and over again.
I know how I feel about White, and if this matter is not resolved, it won't lead to the next thing, which is why I only charge if I don't do anything on the web.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Recommended if you are concerned about AfterFire Ya
AfterFireYa noise is recommended for those who are concerned about the exhaust Gas regulation at the time of vehicle inspection. [Color] Clear is not possible. Therefore, I do not recommend it to those who think it is time-consuming to remove and install it for each vehicle inspection. View detail
Not associated with corrosion in piping
OEM Steel piping inevitably rusts and corrodes inside. This rust was unacceptable, so we decided to convert to titanium.
Whenever you say "hang" in the installation, ORing [Silicone grease]. Apply a thin coat of "PEEK" before assembling!
This is about it.
If the O-ring is coated with silicone grease, the O-ring will enter the cylinder block easily without getting stuck. If the O-ring is inserted without applying the grease, the O-ring may be damaged (I have experienced this in the past).
This is such a relief to know that the piping will not rust, that the rust will not eat into the rubber hose, and that it will not damage the water jacket.
View detail
Fits: HONDA CB400SF Revo, HONDA CB400Super BOLDOR Revo
so so
Simply replace with OEM Rear suspensionBolt.
However, I am afraid that the Hexagonal Wrench might lick if the Torque is applied when tightening the Bolt.
Considering replacing it with a Stainless bolt of the same size.
At first, I attached a screw lock and tightened it.
View detail
Shift feel changes
I was skeptical about it, but it works.
Shift feel is so much better.
When I saw the actual product, I felt the price was high....
The work is easy, but be careful because Bolt coated with Screw Lock is super hard.
View detail
Satisfied
This is what you get when you Lowdown.
I like the casual Mark!
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Product Usage
Very good product, KFACTORY's products are very well made! View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
3D Vendor Beauty Exhaust System??
The beauty of the curve of the exhaust pipe by 3D bender is the best among the external Full Exhaust System for Z900RS.
KFACTORY's, CLR-R+. (Plus) I am glad I chose Full Exhaust System.
The sound quality is neither too loud nor too quiet, just the right amount of sound, and the sound quality is typical of Titanium, which is good!
View detail
Fits: KAWASAKI NINJA1000, KAWASAKI NINJA1000, KAWASAKI NINJA1000SX, KAWASAKI ZRX400, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900RSCAFE, KAWASAKI Z900RS
Exhaust System replacement at the same time
Still. The mileage is low, but I changed it at the same time as Exhaust System replacement.
It is safe.
View detail
95 pi.
No other size is this good! If you can find Other Brand Product, you may be able to buy it a little cheaper. View detail
Fits: HONDA CB400SF Revo, HONDA CB400Super BOLDOR Revo
One point Custom
I bought it at One point custom.
To prevent fading [Color] Clear blown and then installed!
View detail
I don't think it's useful
I don't think there is any change in shifting after installing it, not at all, which is disappointing.
Similar products made in China are only a quarter of the price. I don't think this thing has any technical content. -------------------------------------------------- -------- I didn't think there was any change in changing the gear after installing. It was completely disappointing. Similar products made in China are only a quarter of the price. I don't think this thing has no technical content. Powered by Google Translator
View detail
Nice fit.
Slider fitment can make the front lower part look more solid and fuller. insurance that will protect against unexpected damage. View detail
I think it's the Front Axle Slider from Best Buy.
Someone has already written a Review, so here is another perspective.
Front forkBottom and Brake Caliper are not affordable to replace with Wound.
But when I tried to buy a Slider for that purpose, it cost me 15,000 yen for two small chunks of DURACON and a mere stick of All Screw in a Vinyl bag. I was like, "Are you going to pay 15,000 yen out of the small amount of money you have in your pocket? It was an Image like that.
The quality of each part is so high that it can withstand the act of looking at it next to the PC until the day of installation after it arrives.
The shaft is not just an all screw, but a machined aluminum alloy shaft, so I did not use the included stainless steel screw, but prepared a separate Duralumin screw to assemble the shaft.
This is a great QUALITY product as others have stated in their Reviews.
Before purchasing the product, I was a little concerned about the Logo, which is often noticeable in photos, but in reality, it is a small one, so it is not particularly noticeable.
Anyway, we strongly recommend this product to those who are not sure which front fork slider to choose.
View detail