Reviews
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Exactly!!
The large number of holes allows for use in combination with other Brackets.
I think it's versatile.
View detail
K-Factory Clamp - Used on 1988 Suzuki GSX-R750J Slingshot
Very high quality fork clamp to install damper. This is a 43mm gold clamp made of aluminium, the anodise paint on the material is very good with fine workmanship. It has 2 holes to install at different locations. Eventhough it is stated for Kawasaki ZRX1200, i use it on my 1988 suzuki gsx-r750J slingshot. it looks beautiful along with the ohlins damper! View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200 DAEG
Works as intended
Works well and looks nice on my 03 ZRX1200R. The only problem is you have to source your own hardware (bolts). I would purchase again. View detail
fit and strong
I replaced K-factory footpeg Type 3 for Bonamici racing footpeg that fell down on my Ducati StreetFighter 1098. The K-factory footpeg diameter is @22 same size and type with Bonamici, and can be reused M8 bolt fit and very strong. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Good looking.
The L-shaped bracket that came with the OHLINS Suspension was lost while I was taking it out for overhaul. It looked better than the OHLINS bracket and was easy to install. I use a Fender Eliminator, so I was able to install it without modification, but if you use OEM Fender, you may have to cut some parts off. If it were a little cheaper, it would be a perfect score. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Pure Design Excellence
Open the box and feel love at first sight...its beautiful curves and sparkling polish will captivate you! The strength and fitment are also superb. I must give a perfect score here! Also, a big compliment to Web!ke Japan for rapid delivery, you truly are the Super Stars of fast service and customer satisfaction! View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
for safety lift
The surface is very clean, and the installation is very easy. Fasten the enclosed bolt to the swing arm. The surface is smooth and beautifully finished It looks strong enough. The lift requires a spool-shaped hook receiver. Please refer to the picture Also, if you apply rock tight when you do bolting I think we can prevent loss in advance. View detail
High qualities
I tuned z900rs by almostly k-factory parts This product have a high quality and defense dust thing for swing arm hole Good print logo and nice finish I hope to buy silver color too View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
K-factory
I dressed up almost parts by k-factory Quality is always high And parts look is clean You can setup easily and have a nice look View detail
Essential Items for Brembo clutch master
I can't ENGINE without it. LOL!
Instruction Manual was included and was easy to understand.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Too beautiful, isn't it?
3D Vendor Poles
The ultimate beauty of Full titanium
A masterpiece even when viewed as a PartsSingle Body.
View detail
It is a good item
I think it's a very good product
Mounting Screw is not included.
Install with ex-Screw.
The appearance and texture will be considerably improved.
Recommended
View detail
Upgrading?
Not only does it look great, but the texture is also perfectly Upgrading?. View detail
Fits: KAWASAKI NINJA ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400
Reliable KFACTORY
I had already installed KFACTORY on my other car, so I was comfortable with the purchase!
It was installed by simply removing the Lower cowl.
The middle of the 1stSmall stone is rolled up in a fine mesh, making it very effective in preventing stones.
I can go Touring with peace of mind!
View detail
2003 zrx1200r bracket
Just what I was looking for! I was having some trouble with my foot touching the oem exhaust bracket. This just solved it! Easy to install. Great quality! Highly recommend it View detail
Nice piece
Nice piece. Works perfectly on zrx w zx7r rims... View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
OEM is a thin steel plate
I can't evaluate the cornering, etc. because I don't run on circuits, but the aluminum cut-outs increase the rigidity, so the GEAR of the mission is clearly improved and it gives a tight feeling. After replacing the aluminum cut-outs, you will feel even better if you replace the oil with a good oil. (In my case, it's New TEC.) I am glad that I replaced it because I now feel more relaxed even if my pace is faster than usual when I am driving on a mountain pass. (I'm sure it's having a positive effect on the body and suspension.) You can recommend it. View detail
Fits: KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1000 Mk2, KAWASAKI Z1R
It's great
[How is it used?
Winding at a good pace.
Was the one you received as per Image?
Anyway, it is lightweight. I used to use Stainless steel tubes, but this is totally different.
Other people said they were concerned about the vertical cord, but I liked the ruggedness of it.
Was the installation difficult?
If you're an old car rider, you're required to do some maintenance yourself.
I think that Levels are perfectly acceptable.
How was your experience with it?
First of all, I felt the lightness when I pulled it around, and the sound was about 2 or 3 times fatter.
I was worried that the Torque feel would be reduced since it is a 4-1, but I had no problem with that. I was worried that the Torque feel would be reduced since it is a 4-1, but I have no problem with that. I think it is suitable for me.
[Included Parts:were they on?
Aluminum Flange and Exhaust Spring are also included and I have no complaints at all.
[Was there anything that disappointed you?
So much for the price. There are no expectations ha Gap at all. If I had to say something, I would say that if you could get Sticker included….
Other items that would be helpful
Point of installation and hang/.
I have no inconvenience as per the Instruction Manual, but I think it would be better for beginners if the Torque for tightening the Flange is described. I think it would be good for beginners. Beginners often tighten the flange until it bends.
Availability and clarity of Instruction Manual/
We do have an Instruction Manual. Well, is it easy to understand?
I didn't need it. I only stick to it as it sticks to me.
Notes/.
As I mentioned above, if I had to say something, I would say that it is an aluminum flange, so be careful with Torque.
Items to buy together/
Gasket is required to replace the exhaust pipe.
Opinions and requests to Manufacturer
Not at all!
View detail
Installed on SEROW250
Since DAYTONA's EngineSIDEGuard was already installed on SEROW, a simple Under Guard was installed.
Installed with 4 Screws.
It is Simple, but when it is running, it makes a clunking sound, so it seems to be Guarding the Engine.
View detail
40mm lowdown
To ride SEROW, 40mm lowdown because of my short height of 154cm.
Even beginner women can work on it.
The front also protrudes 20mm.
I was able to straddle the SEROW while standing normally, even though I used to straddle the SEROW while standing on the Side Stand.
It is good mentally to have both feet firmly on the ground. (40mm lowdownSeat by Rikizou is installed to match)
View detail