Reviews
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200 DAEG
Works as intended
Works well and looks nice on my 03 ZRX1200R. The only problem is you have to source your own hardware (bolts). I would purchase again. View detail
fit and strong
I replaced K-factory footpeg Type 3 for Bonamici racing footpeg that fell down on my Ducati StreetFighter 1098. The K-factory footpeg diameter is @22 same size and type with Bonamici, and can be reused M8 bolt fit and very strong. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Good looking.
The L-shaped bracket that came with the OHLINS Suspension was lost while I was taking it out for overhaul. It looked better than the OHLINS bracket and was easy to install. I use a Fender Eliminator, so I was able to install it without modification, but if you use OEM Fender, you may have to cut some parts off. If it were a little cheaper, it would be a perfect score. View detail
Easy to handle, looks so-so.
Easy to install and looks ok. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Pure Design Excellence
Open the box and feel love at first sight...its beautiful curves and sparkling polish will captivate you! The strength and fitment are also superb. I must give a perfect score here! Also, a big compliment to Web!ke Japan for rapid delivery, you truly are the Super Stars of fast service and customer satisfaction! View detail
_TS.jpg)
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
for safety lift
The surface is very clean, and the installation is very easy. Fasten the enclosed bolt to the swing arm. The surface is smooth and beautifully finished It looks strong enough. The lift requires a spool-shaped hook receiver. Please refer to the picture Also, if you apply rock tight when you do bolting I think we can prevent loss in advance. View detail
High qualities
I tuned z900rs by almostly k-factory parts This product have a high quality and defense dust thing for swing arm hole Good print logo and nice finish I hope to buy silver color too View detail
worst case scenario
Please be careful with this shoddy product. The paint peeled off when I opened the package. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
K-factory
I dressed up almost parts by k-factory Quality is always high And parts look is clean You can setup easily and have a nice look View detail
Essential Items for Brembo clutch master
I can't ENGINE without it. LOL!
Instruction Manual was included and was easy to understand.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Too beautiful, isn't it?
3D Vendor Poles
The ultimate beauty of Full titanium
A masterpiece even when viewed as a PartsSingle Body.
View detail
It is a good item
I think it's a very good product
Mounting Screw is not included.
Install with ex-Screw.
The appearance and texture will be considerably improved.
Recommended
View detail
Upgrading?
Not only does it look great, but the texture is also perfectly Upgrading?. View detail
Fits: KAWASAKI NINJA ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400
Reliable KFACTORY
I had already installed KFACTORY on my other car, so I was comfortable with the purchase!
It was installed by simply removing the Lower cowl.
The middle of the 1stSmall stone is rolled up in a fine mesh, making it very effective in preventing stones.
I can go Touring with peace of mind!
View detail
Punishment….
Shift feeling is good, but I think the price is a little high.
The work is very easy, but the screws on the side stand are hard to remove. It depends on the tool.
If the price itself was a little lower, it would have been ??5.
View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA X-4
I feel lighter.
I do feel lighter.
Clutch play is more than OEM, so lever adjustment may be necessary!
Custom feeling is up.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
Looks like a ____.
Since the HeadOil line is replaced with Stainless Mesh backed by Other Brand Product, I bought it to match the color of the Hose.
Also, I am satisfied with the DURACON Black because it matches the Cylinder color and Bolt Titaniumium gold because it matches the Exhaust System color.
However, I understand that Cut-outParts are expensive, but I would be more satisfied if they were less than 20,000.
Note that two crash washers for FittingBody and two O-rings for Bolt are included, but two crash washers for Oil line Bolt are not included and must be prepared separately.
View detail
2003 zrx1200r bracket
Just what I was looking for! I was having some trouble with my foot touching the oem exhaust bracket. This just solved it! Easy to install. Great quality! Highly recommend it View detail
Nice piece
Nice piece. Works perfectly on zrx w zx7r rims... View detail
Above all, lightweight!
It was originally designed for the KLX230, but since the Engine is the same, we installed it on the 230R.
The O2 Sensor must be plugged.
The reason for replacing the exhaust system was to reduce weight more than anything else, and it is much lighter than the heavy Silencer of NORMAL.
The sound will be brave in its own way, but since it is JMCASpec. it will not be the ear-splitting explosion of Single.
I use SP Tadao's PowerBox for my exhaust pipes, and I was thinking of using SP Tadao's silencer as well, but I was attracted by KFACTORY's slim design and decided to purchase it.
Although it is not possible to say "Power up at once by changing the Exhaust System," the benefits of weight reduction were felt well.
The problem is that the idling of the KLX230R is very high to begin with, but after the exhaust system was replaced, it became even more noticeable, and I have the feeling that the return is worse with the AxelOff.
This was not a problem when driving on level ground, but when descending the EnduroCourse, the speed was quite high in Idling even in 2nd gear, which was a miscalculation. We need to think of some way to adjust the idling.
For an Exhaust System product, the precision was outstanding and installation was easy.
View detail