Reviews
Good work.
After all, OHLINS goes well with this.
The cut-outs have a great impact on the appearance at this price.
KA739 Strong gold on Z900RS SEOEM
Impact looks awesome!
View detail
Watch You Tube.
I bought it because youtube said it was the best recommendation. I don't think I've had any luck with it since it's still a new car, but when I used the automatic shifter, there were times when it felt a bit squishy, but after installing it, I was able to snap it in. However, when installing, I had to loosen the bolt on the side stand, but it was very tight. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZRX1200 DAEG, KAWASAKI NINJA ZX-14R
The quality of the product is perfect. I appreciate that I can adjust it quickly without using any tools.
That was a good purchase
I appreciate the ability to quickly adjust without using tools.
No complaints about the texture.
View detail
Incredible quality and finish
K Factory really puts out the top shelf parts. No, they're not cheap but you really get what your paying for. The black anodized finish looks amazing. The welds and machine work are almost works of art. Shipping is suprisingly fast from Japan too. View detail
K factory Link Plate
ReliableManufacturer and looks good Parenthesis! View detail
Change Shaft Holder
I think it looks good.
TIGHTLY and MOCHILIOUSLY!
View detail
It can be exchanged in an instant.
I thought the OEM Blackish Grip was uncool.
I was wondering if we could exchange, from KFACTORY and Moto Corse.
I purchased KFACTORY's Grip when I learned that Grip was available.
I was worried about Moto Corse, but decided to go with this one.
I was worried because this SmallestParts cost almost 10,000 yen, but I am glad I bought it.
View detail
K-Factory billet details
This beautifully machined piece tops off the TTX Ohlins shock on my H2 very nicely . This sort of detail addition is what I look for when customizing my bikes . View detail
Maybe expensive for a Small thing. But I wanted it and I am satisfied.
It is a part that may or may not be changed, but it is a part that you can buy and use in its own way.
I'm happy with it
It would be better if it were a little cheaper. But I guess it can't be helped.
Replacement can be done in an instant with a hexagon.
View detail
If you don't want to slip anyway, this is the one.
Footpeg is quite expensive, but it is worth the high price.
Generally, footpegs have a rolling finish, called Knurl finishing, to prevent footpeg slippage, but this footpeg is entirely machined.
The Edge is not chamfered at all, so it stands gutsy at 90° and if you carelessly touch it with your hand, it might cut you.
Grip is the strongest in the world because this Edge sticks to cut the bottom of Boots.
Anyway I never slip." It is safe to say that it is made only for the purpose of
Unlike the common Footpeg for Race, the entire surface of the cylindrical shape is cut, so it can be replayed many times by rotating it when the Edge becomes round.
If played back in 1/6 rotation, it lasts 6 times longer than normal.
It does not look amazing, and it is not anodized in a flashy way, so it is a treasure for those who value looks.
A gem for people who are serious about running Circuit.
The sole of the boots is cut and shaved with such force that a pair of sneakers-type riding shoes can be ruined in a single blow.
Be sure to use it with Boots.
View detail
Effective
I was concerned about the Shift error during Downshift.
Purchased
For the price, it works.
If the part where the Shaft goes in is Bearing.
I think it is better.
Installation is in accordance with the Instruction Manual.
It is easy if you do it.
View detail
GSX1300R HAYABUSA Must-have item
I was looking for a good one, and this one caught my attention and I bought it.
I felt a strange tugging at the bearing when I inspected the product, so I applied Bell Hammer's METALGrease to the bearing to make sure it moved smoothly.
Tools should be 10mm hex and 8mm CombinationWrench with Screw lock agent
The rest of the work is done according to the manual, applying a thin coat of grease to the shaft and collar before installation, lightly cleaning the bolt and bolt hole of the side stand with air, applying locking agent to the bolt and tightening it securely.
Inspect each part before running test…!
The more pleasantly Shift is set, the more obvious the difference!
To be honest, it is a good price, but if you are a GSX1300R HAYABUSAOwner, you should buy this custom parts… Oh, it is more convenient to have a maintenance stand.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Exactly!!
The large number of holes allows for use in combination with other Brackets.
I think it's versatile.
View detail
K-Factory Clamp - Used on 1988 Suzuki GSX-R750J Slingshot
Very high quality fork clamp to install damper. This is a 43mm gold clamp made of aluminium, the anodise paint on the material is very good with fine workmanship. It has 2 holes to install at different locations. Eventhough it is stated for Kawasaki ZRX1200, i use it on my 1988 suzuki gsx-r750J slingshot. it looks beautiful along with the ohlins damper! View detail
fit and strong
I replaced K-factory footpeg Type 3 for Bonamici racing footpeg that fell down on my Ducati StreetFighter 1098. The K-factory footpeg diameter is @22 same size and type with Bonamici, and can be reused M8 bolt fit and very strong. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Good looking.
The L-shaped bracket that came with the OHLINS Suspension was lost while I was taking it out for overhaul. It looked better than the OHLINS bracket and was easy to install. I use a Fender Eliminator, so I was able to install it without modification, but if you use OEM Fender, you may have to cut some parts off. If it were a little cheaper, it would be a perfect score. View detail
It is a good item
I think it's a very good product
Mounting Screw is not included.
Install with ex-Screw.
The appearance and texture will be considerably improved.
Recommended
View detail
Upgrading?
Not only does it look great, but the texture is also perfectly Upgrading?. View detail
Nice piece
Nice piece. Works perfectly on zrx w zx7r rims... View detail
40mm lowdown
To ride SEROW, 40mm lowdown because of my short height of 154cm.
Even beginner women can work on it.
The front also protrudes 20mm.
I was able to straddle the SEROW while standing normally, even though I used to straddle the SEROW while standing on the Side Stand.
It is good mentally to have both feet firmly on the ground. (40mm lowdownSeat by Rikizou is installed to match)
View detail