Reviews
Fits: HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
K-factory radiator core guard
Now if there is a difference in width size of the radiators I had to re-drill the holes on the side brackets by about 5mm each side then the cover slotted over nice and tight so expect there could be some adjustment needed View detail
Beautiful browning
I recommend it because of its beautiful baking color and rust-free. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Beautiful browning
The product did not arrive as Manufacturer did not seem to have it in stock, but the product is a good one.
Note that the O-ring protrudes from the car body when installed, making it difficult to insert the O-ring.
View detail
Fits: KAWASAKI NINJA ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400
Reliable KFACTORY
I had already installed KFACTORY on my other car, so I was comfortable with the purchase!
It was installed by simply removing the Lower cowl.
The middle of the 1stSmall stone is rolled up in a fine mesh, making it very effective in preventing stones.
I can go Touring with peace of mind!
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
Looks like a ____.
Since the HeadOil line is replaced with Stainless Mesh backed by Other Brand Product, I bought it to match the color of the Hose.
Also, I am satisfied with the DURACON Black because it matches the Cylinder color and Bolt Titaniumium gold because it matches the Exhaust System color.
However, I understand that Cut-outParts are expensive, but I would be more satisfied if they were less than 20,000.
Note that two crash washers for FittingBody and two O-rings for Bolt are included, but two crash washers for Oil line Bolt are not included and must be prepared separately.
View detail
Fits: KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200
Refreshing and good to put together.
The price is a little high, but it looks Refreshing and put together very well.
Another good point is that Washer and Bolt can be used without modification by the OEM.
View detail
very good
The product is very good. Installation can be done in about an hour with knowledge. After installation, the footpeg area is refreshing and good. View detail
No rust in the piping!
OEM Steel piping rusts even if you have WAKOS Heatbu Lock plus in it. This may be due to the fact that they are steel pipes, but it is unacceptable.
I can't believe Rust is going GRUGRU around the coolant path.
However, Titanium piping has nothing to do with rust. After all, it forms a passive film on the surface, so it does not rust.
It's lightweight, and the Titanium baking color gives it a beautiful glimpse when you look into it.
I will protect my beloved machine! I saved up and bought it with this strong conviction alone.
View detail
Not associated with corrosion in piping
OEM Steel piping inevitably rusts and corrodes inside. This rust was unacceptable, so we decided to convert to titanium.
Whenever you say "hang" in the installation, ORing [Silicone grease]. Apply a thin coat of "PEEK" before assembling!
This is about it.
If the O-ring is coated with silicone grease, the O-ring will enter the cylinder block easily without getting stuck. If the O-ring is inserted without applying the grease, the O-ring may be damaged (I have experienced this in the past).
This is such a relief to know that the piping will not rust, that the rust will not eat into the rubber hose, and that it will not damage the water jacket.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Product Usage
Very good product, KFACTORY's products are very well made! View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SF Revo, HONDA CB400SF Revo
Kay FACTORYRadiator guard
The letters "Kay FACTORY" are well-designed, and the large size is more protective than the NORMAL. View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300
For appearance and scratch prevention
I bought this to really change the look of the OEM and to prevent scratches on the Oil cooler.
I think it was very good.
View detail
Fits: HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100
Dress-up effect for a more luxurious look!
[How is it used?
I had been using an inconspicuous Oil cooler guard made by another company, but bought it for dress-up purposes and upgraded it.
Was the one you received as per Image?
The thickness was thin and there were some concerns about its strength.
Was the installation difficult?
The lower part is fixed to the Rubber Bush (Grommet) of the OEM Oil cooler, but it requires a hang. Be careful not to try to force it into place, as it may damage the bush.
How was your experience with it?
The Size feel is pleasantly Exactly.
The oil cooler guard I used before had a large gap between the core and the guard, and the netting was rough, so when I was touring, a beetle I had never seen before got caught and killed me from the heat.
[Included Parts:were they on?
Except for Body, only Cushion is available.
[Was there anything that disappointed you?
The thickness was thinner than I expected, so I might hurt myself if I carelessly touch it.
For hang installation, it is better to remove the oil cooler from the frame with the hose connected, and then remove the rubber bushing together with the oil cooler.
View detail
With the included Connector, installation is a breeze;
The OEM Brake switch cannot be used without modification with the installation of the K-FACTORYRear Sets Kit, so the switch was replaced with this product.
While the included Connector makes installation easy, the
On the flip side, the OEM Brake switch is left hanging, so a separate Bullet Terminal is installed.
So it was a bit tricky to install.
If you are familiar with Wiring processing, it is a simple task.
Thanks to this process, it is also easy to revert back to OEM switches, so it is a recommendation.
If you are not confident, consult with Shop.
It is your responsibility, but you can install it yourself for 5~600 yen Plus per Bullet Terminal minute.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
I guess it's more …**** than I thought.
[How is it used? Dress-up subject; effect as a Cover/Shroud is unknown.
Was the one you received as per Image? The product image suggested a sense of massiveness, but the actual product is thin and light. To make matters worse, the texture is cheap and the material is PelePera. I chose Black Anodized, but I think Polish looks more luxurious.
Was the installation difficult? No difficulty; OEMCover removed and quantity of Spacer collar with attached Bolt:Pair (for Left and Right) Just make sure to Screw in the correct (Tool) Hexagonal Wrench
How was your experience with it? As a Radiator side cover… it depends on the color you choose, but black gives a custom look without being noticeable. If you prefer a more modern look, we recommend the Polish color.
[Included Parts:were they on? Quantity:Pair (for Left and Right) Bolt/Quantity:Pair (for Left and Right) 2 pcs each color
[Was there anything that disappointed you? It is unfortunate that both the Material feel and texture are somewhat cheap. I think Design is good as a follow-up.
Other items that would be helpful
Installation Point or hang As mentioned above, theQuantity:Pair (for Left and Right) If you don't make a mistake, there is no problem. /Instruction Manual Yes, clarity ○○/Points to note Wound is easily attached. Thin and may be deformed by rough handling. Items to buy together None. Opinions and requests to /Manufacturer I would like to see the product manufactured with carbon material.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
PeLePera feeling
[How is it used?
Looks good but peLePera-like.
Was the one you received as per Image?
Yes, I have. I just want it to feel a little more rigid or solid.
Was the installation difficult?
Easy
How was your experience with it?
PeLePera-like
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The dress-up effect is large because it covers the radiator side.
I bought this for dress-up purposes.
It has a high dress-up effect because it covers the SIDE.
The center side, which tends to trap mud and stones, has a finer mesh.
I think it is also highly protective.
I felt that I might get a cut on the edge part, so it might be better to use military gloves when installing.
The color is Black, which is brighter than any of the Gold parts used in the car body, so it looks a bit floaty.
I felt that there would be disagreements on whether we wanted to create a sense of unity or emphasize the dress-up period.
View detail
K-FACTORY radiator (water tank) guard
It is very good, it very fit to the bike to make it be smart and the shipping is good too , it fast and the packing are very good too. View detail
Improved appearance and defense
It is easy to install, and it is OK with the screw stop as it is after removing the standard.
I think K-FACTORY's type is good because it covers to the SIDE of Radiator.
View detail
Handling Instruction Manual
There was an Instruction Manual for the installation, and we used it as a basis for the installation.
In my car, the depth of the screw hole of the body was not enough, and the installation was not enough according to the instruction manual.
I removed the OEM Radiator guard mounting collar and put it in between the two to solve the mounting problem.
View detail