Reviews
Beautiful browning
I recommend it because of its beautiful baking color and rust-free. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Beautiful browning
The product did not arrive as Manufacturer did not seem to have it in stock, but the product is a good one.
Note that the O-ring protrudes from the car body when installed, making it difficult to insert the O-ring.
View detail
Fits: KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200
Refreshing and good to put together.
The price is a little high, but it looks Refreshing and put together very well.
Another good point is that Washer and Bolt can be used without modification by the OEM.
View detail
Fits: HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100
Dress-up effect for a more luxurious look!
[How is it used?
I had been using an inconspicuous Oil cooler guard made by another company, but bought it for dress-up purposes and upgraded it.
Was the one you received as per Image?
The thickness was thin and there were some concerns about its strength.
Was the installation difficult?
The lower part is fixed to the Rubber Bush (Grommet) of the OEM Oil cooler, but it requires a hang. Be careful not to try to force it into place, as it may damage the bush.
How was your experience with it?
The Size feel is pleasantly Exactly.
The oil cooler guard I used before had a large gap between the core and the guard, and the netting was rough, so when I was touring, a beetle I had never seen before got caught and killed me from the heat.
[Included Parts:were they on?
Except for Body, only Cushion is available.
[Was there anything that disappointed you?
The thickness was thinner than I expected, so I might hurt myself if I carelessly touch it.
For hang installation, it is better to remove the oil cooler from the frame with the hose connected, and then remove the rubber bushing together with the oil cooler.
View detail
With the included Connector, installation is a breeze;
The OEM Brake switch cannot be used without modification with the installation of the K-FACTORYRear Sets Kit, so the switch was replaced with this product.
While the included Connector makes installation easy, the
On the flip side, the OEM Brake switch is left hanging, so a separate Bullet Terminal is installed.
So it was a bit tricky to install.
If you are familiar with Wiring processing, it is a simple task.
Thanks to this process, it is also easy to revert back to OEM switches, so it is a recommendation.
If you are not confident, consult with Shop.
It is your responsibility, but you can install it yourself for 5~600 yen Plus per Bullet Terminal minute.
View detail
K-FACTORY radiator (water tank) guard
It is very good, it very fit to the bike to make it be smart and the shipping is good too , it fast and the packing are very good too. View detail
To prevent the fins from collapsing
I bought this to prevent RadiatorCore from collapsing.
The Motorcycle I used to ride didn't have such a Guard, and that's why the fins would get crushed by stepping stones, etc. and not cool → going to the verge of Overheat!
I bought it as a Risk hedge because I was in a bit of pain.
The price is a little more effective than other manufacturers, but the product itself is thin and flexible.
Therefore, it fits to RadiatorCore which is slightly curved, and the adhesion is good impression.
Also, because it is a dedicated product, the position and dimensions of the holes for installation are just right.
I have used it for about 2 years and it works well. There is almost no Core crush and Protection performance seems to be good.
If I mention a point to be careful, it is attention to the injury at the time of the installation. As you can see in the description, the thinness of the product makes it easy to cut the edge, so it is better to avoid working with bare hands.
It is better to wear military or mechanical gloves for protection before working.
View detail
Fits: SUZUKI DL1000 V-STROM250
Slightly unsatisfied with strength
Material is thin and strength is a little uncertain
Material:I like that it's Stainless Steel.
View detail
Fits: KAWASAKI Z1000, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000
Nice texture, but expensive!
Texture is good and easy to install.
But I think all Radiator guards are overpriced.
Parenthesis gets better, so I can't help but say, well, I can't help it….
View detail
For a little more money...
I ordered a K-FACTORY Radiator core guard from OEMOption before the vehicle was delivered and scratched, but I ordered a K-FACTORY Radiator core guard on a temporary basis because the shipment is still undecided.
The cowl of ZX25R can also be attached without removing it, as may be the case with other manufacturers.
However, there is some work to be done to get in between the front wheels and the vehicle and to install it in Wrench.
Round Sponge to be attached between the Radiator and the product to prevent chattering noise. (You don't have to put it on.) It comes with a (Double-sided Tape Fixing) The manual doesn't say whether it is effective or not. So I put it in the middle.
I've driven about 500km since I put it on and so far I haven't had any particular Chatter noise etc.
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200
Peace of mind with Titanium
NORMAL is painted on Iron Pipe, but the front wheels are painted with sand and small stones that are rolled up was peeling and rusting
If the rust continues to develop, it will cause water leakage:I replaced it with this one from Titanium
Great texture, but unfortunately it's almost invisible when you wear it …
It's all good because it's self-congratulatory!
View detail
I'm very happy with the look and function of the product
I was going to get a plastic one for about 5,000 yen, but I was worried about its durability and strength, so I went with this one I did
Material:It is made of Stainless Steel, so it is reasonably strong, but it is also lightweight and can be mounted securely and does a great job of protecting the fins of the Radiator
It also comes with an anti-vigilance pad, which is kind of nice
It looks good and Parenthesis good, so the price is reasonable
View detail
HoneycombEtching is Parenthesis
Very easy to install!
Anyway, Parenthesis is good It is inconspicuous but …
It seems to be useful enough to protect the Radiator
I wish it was a little cheaper, but every Manufacturer would charge this much
View detail
Protection effect is good
As I reviewed earlier, I put on a vibration isolating Seat so as not to interfere with the Radiator, but a beeping sound comes out with acceleration from 2000 rpm or less
The current product is Rib on the lower side (fold) There seems to be strength, but the initial product may be due to the absence of Rib ??
In addition, since the engine itself is vibrating under acceleration from 2,000 rpm, which is originally 4th speed or higher, since the beating sound of Core guard is the marker, I am driving as if I do not hear a beeping sound, so I wonder if it is okay I will
View detail
Regardless of the effect, there is enough sense to Custom
【What made you decide the purchase?】
Radiator core guard I installed it so I wanted to exchange it with a set at the same time.
【How was it actually used?】
I am satisfied with working.
【Mounting was difficult?】
it's simple. However, as RadiatorCap interferes with the car body Right Side, let's read the Instruction Manual firmly.
【Please tell me the installation point and hang】
Paste the image of the procedure in the procedure.
[Is there anything I was disappointed about?]
Because it feels the same as Oil cooler of 4th MINI, maybe I want a little more luxury?
【Hope for Manufacturer - Please let me know if you have any improvement points]
I also wanted a surface texture similar to Color Anodized Aluminum to make a luxurious appearance on the U-shaped Bracket.
【Have you compared items?】
None
View detail
Preliminary Parts of Next Engine (Crying)
It is NINJA with ZrX1100Engine.
It can not attach to 1100 Engines for 1200 Engines.
I attempted to install with 1100 Engines, but I can not get in touch with Camshaft Cover.
I made it to Coating....
It became the spare Parts of the next Engine.
1200Engine is definitely this!
Next is ZrX 1200 DAEGEngine? (Lol)
View detail
Fits: YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER GT, YAMAHA MT-09, YAMAHA XSR900
It's a price - - - -
Motorcycle I installed it at the store's shops at Motorcycle store when delivering cars.
Radiator guard Hook the upper pawl on the upper edge of the Radiator and tighten the mounting bracket with 4 pairs of lower + screw & Nut to complete installation.
Spring washer is attached to the mounting screw, but it seems to come off anyway if you do not apply screw stopper.
Although FZ 1 FAZER of the front car is attached with the Radiator guard, it became lost when becoming MT - 09 TRACER, and purchased it because the lifespan of the Radiator core was worried by the winding of the front wheel.
The shape is fluent, the gap with the RadiatorCore is 2 to 3 mm and the center of the Radiator guard is attached to Core and a circular Sponge of about 100 yen coin to secure a gap, and the minimum defense effect You can expect.
As the installation was in December, I am worried about the rise in the water temperature in summer - - -
View detail
Fine adjustment required
I changed it for emphasis on appearance.
Installation can be done without problems but it is important to note that there was Chatter sound during running etc. unless it was slightly adjusted.
Afterward I got the Spacer caught in the attachment part because I got a little Size Large.
View detail
very good.
I installed it in Formula 01 CB 1300. Since the OEM's web rusted, Aluminum in the lateral part of the net corroded, so polished and painted failed. Because it is old, when we estimate to purchase a new OEM, we will have about 9,000 yen so purchase this Core guard. Purchase will not be more than 15,000 yen so we did not have any intention to purchase, but since it can be purchased with OEMPlus α, it can not be helped. Installation is easy and it is a place where vibration comes in, so I installed it using Screw lock. The hole of AluminumGuard was opened horizontally so that the net did not bend, so it was easy to adjust, the net was a product that can fit tightly like OEM without bending. Everyone says that the net is thin, but it is very solidly made. While running, there was no deflection or noise of Ami at all, so I thought it was KFACTORY. Functionally, it's just Dress-up, but if you catch something on occasion, your appearance will change a lot and it will definitely be very cool. For CB 1300 only, I think that it is okay to install it exactly. However, it is a difficult point to say that the price is very high, like you guys. I can not uplRoad it because somehow attached pictures are not there, but it is a very good product and I shipped it as soon as possible. View detail
Premium ornaments
As a trendy, I installed it as a simple Custom
It is expensive and I could not grasp the function that matches it.
Because the shining Stainless Steel and Brand logo stand out against NORMAL 's Black
I feel the value as a decorative item.
View detail