Reviews
Easy to install! I haven't tried it out yet, but I'm expecting a Large lol.
Exhaust System was replaced and After Fire occurred frequently.
Purchased to reduce it!
I am also looking forward to the reduction of embrittlement during blipPingDownshift!
I have not been able to test drive the car after installation for various reasons.
I'm sure it will work and I'll be back for more imprements lol.
View detail
Fits: KAWASAKI NINJA ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400
Reliable KFACTORY
I had already installed KFACTORY on my other car, so I was comfortable with the purchase!
It was installed by simply removing the Lower cowl.
The middle of the 1stSmall stone is rolled up in a fine mesh, making it very effective in preventing stones.
I can go Touring with peace of mind!
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
OEM is a thin steel plate
I can't evaluate the cornering, etc. because I don't run on circuits, but the aluminum cut-outs increase the rigidity, so the GEAR of the mission is clearly improved and it gives a tight feeling. After replacing the aluminum cut-outs, you will feel even better if you replace the oil with a good oil. (In my case, it's New TEC.) I am glad that I replaced it because I now feel more relaxed even if my pace is faster than usual when I am driving on a mountain pass. (I'm sure it's having a positive effect on the body and suspension.) You can recommend it. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI KATANA, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1100, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
self-satisfaction
I didn't have a tool to tighten it, so I fixed it with Wiring.
It is a more self-satisfied area.
View detail
very good
The product is very good. Installation can be done in about an hour with knowledge. After installation, the footpeg area is refreshing and good. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Buy peace of mind!
OEM is PelePera steel plate. If this is cut out of aluminum alloy gold, the rigidity will be increased.
Quantity that mounts the back end of the Engine to the Frame.:The 2-pc bolt is made of steel (OEM is probably S45C), but if it is made of SCM and the steel plate becomes a Bulk, the rigidity of the bolt will increase.
However, although the rigidity is increased by using SCM material, the toughness is sacrificed in exchange for it, resulting in a decrease in tenacity. Since the rupture will come all at once, it is recommended to use the SCM material when driving in a circuit or under intense load. Bang!" and may result in a rupture.
Well, I decided to install the Large because I don't drive that hard, so I thought it would be sturdy.
The front and rear axle shafts, pivot shaft, and this area are now made of SCM material, so the chassis is now very stiff. This can be felt at the Level of handling.
View detail
No rust in the piping!
OEM Steel piping rusts even if you have WAKOS Heatbu Lock plus in it. This may be due to the fact that they are steel pipes, but it is unacceptable.
I can't believe Rust is going GRUGRU around the coolant path.
However, Titanium piping has nothing to do with rust. After all, it forms a passive film on the surface, so it does not rust.
It's lightweight, and the Titanium baking color gives it a beautiful glimpse when you look into it.
I will protect my beloved machine! I saved up and bought it with this strong conviction alone.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Recommended if you are concerned about AfterFire Ya
AfterFireYa noise is recommended for those who are concerned about the exhaust Gas regulation at the time of vehicle inspection. [Color] Clear is not possible. Therefore, I do not recommend it to those who think it is time-consuming to remove and install it for each vehicle inspection. View detail
Not associated with corrosion in piping
OEM Steel piping inevitably rusts and corrodes inside. This rust was unacceptable, so we decided to convert to titanium.
Whenever you say "hang" in the installation, ORing [Silicone grease]. Apply a thin coat of "PEEK" before assembling!
This is about it.
If the O-ring is coated with silicone grease, the O-ring will enter the cylinder block easily without getting stuck. If the O-ring is inserted without applying the grease, the O-ring may be damaged (I have experienced this in the past).
This is such a relief to know that the piping will not rust, that the rust will not eat into the rubber hose, and that it will not damage the water jacket.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Product Usage
Very good product, KFACTORY's products are very well made! View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SF Revo, HONDA CB400SF Revo
Kay FACTORYRadiator guard
The letters "Kay FACTORY" are well-designed, and the large size is more protective than the NORMAL. View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300
For appearance and scratch prevention
I bought this to really change the look of the OEM and to prevent scratches on the Oil cooler.
I think it was very good.
View detail
Great stuff
Would buy again great quality fast shipping and easy to use . Fit was perfect and came with all the hardware needed to install View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG, KAWASAKI ZZR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
Billet
Great machine work very good quality fit and finish is excellent thinking about buying another for my spare engine fast shipping also View detail
Essential for Full Exhaust System
I changed to Full Exhaust System and put it on because the AfterFire was terrible.
It is not completely gone but much better.
However, it's not a must-have, so if you can find something that fits your needs at Home center or something, it's about 1/10 the price.
The thin rubber cap and clamp are not very cost-effective, but the cost of the product is probably not so good.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Difference between OEMPlate and Cut-out lumps
The OEM is just a thin steel plate with a bolt holder welded to it. Only the Right Side of the vehicle has this mount plate.
The K-Factory engine hanger is simply replaced with a K-Factory engine hanger, which is cut-out of aluminum alloy gold, which increases rigidity, and the mounting bolts are also made of SCM instead of the OEM SC material, which also increases rigidity.
However, it should be remembered that the OEM's SC material is more rigid at the expense of toughness due to its greater tenacity.
This was installed because the vehicle is not used for circuit driving where the vehicle body is in a state of violent torsion.
If you are running Circuit, if you neglect the toughness, it will rupture while running.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZRX400, KAWASAKI NINJA250R, KAWASAKI Z250, KAWASAKI NINJA250, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z1000, KAWASAKI ZRX1200, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R, KAWASAKI Z1000, SUZUKI GSX1100S KATANA, KAWASAKI ZEPHYR750
oil cap
Superb part with an irreproachable finish, a real facelift to the 1993 kawasaki 750 zephyr with its old fashioned oil filler cap. no problem when changing, fits perfectly and for the same weight. -------------------------------------------------- -------- Superb room with the impeccable finish, a real facelift to the 1993 Kawasaki 750 Zephyr with its old outdoor oil filling plug. No problem during the change, sinsere perfectly and for an identical weight. Powered by Google Translator View detail
Front engine mount
Replacement of the steel front engine mounts and their original silent blocks with duralium engine mounts for its elastic resistance (alloy based on aluminum (95%), copper (4%), magnesium (0.5 %) and manganese (0.5%) from K-FACTORY for greater rigidity of the frame often referred to as chewing gum View detail
Rear engine mount
Change of the steel rear engine mount to that of duralium for its elastic resistance (alloy based on aluminum (95%), copper (4%), magnesium (0.5%) and manganese (0.5%) from K-FACTORY for greater frame rigidity View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZRX1200 DAEG, KAWASAKI ZZR1200, KAWASAKI NINJA250R, KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR750, KAWASAKI ZZR1100, KAWASAKI ZZR1100, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100
Aluminum cap
Changed the oil filter cover bolt to its lighter 105g duraluminium twin. Piece of very good quality, a quality finish. fits perfectly View detail