Reviews
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
Looks like a ____.
Since the HeadOil line is replaced with Stainless Mesh backed by Other Brand Product, I bought it to match the color of the Hose.
Also, I am satisfied with the DURACON Black because it matches the Cylinder color and Bolt Titaniumium gold because it matches the Exhaust System color.
However, I understand that Cut-outParts are expensive, but I would be more satisfied if they were less than 20,000.
Note that two crash washers for FittingBody and two O-rings for Bolt are included, but two crash washers for Oil line Bolt are not included and must be prepared separately.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI KATANA, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1100, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
self-satisfaction
No one will notice it, so it is an area of self-satisfaction. K-factory's products are expensive, but I feel the beauty of modeling in their products. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
I guess it's more …**** than I thought.
[How is it used? Dress-up subject; effect as a Cover/Shroud is unknown.
Was the one you received as per Image? The product image suggested a sense of massiveness, but the actual product is thin and light. To make matters worse, the texture is cheap and the material is PelePera. I chose Black Anodized, but I think Polish looks more luxurious.
Was the installation difficult? No difficulty; OEMCover removed and quantity of Spacer collar with attached Bolt:Pair (for Left and Right) Just make sure to Screw in the correct (Tool) Hexagonal Wrench
How was your experience with it? As a Radiator side cover… it depends on the color you choose, but black gives a custom look without being noticeable. If you prefer a more modern look, we recommend the Polish color.
[Included Parts:were they on? Quantity:Pair (for Left and Right) Bolt/Quantity:Pair (for Left and Right) 2 pcs each color
[Was there anything that disappointed you? It is unfortunate that both the Material feel and texture are somewhat cheap. I think Design is good as a follow-up.
Other items that would be helpful
Installation Point or hang As mentioned above, theQuantity:Pair (for Left and Right) If you don't make a mistake, there is no problem. /Instruction Manual Yes, clarity ○○/Points to note Wound is easily attached. Thin and may be deformed by rough handling. Items to buy together None. Opinions and requests to /Manufacturer I would like to see the product manufactured with carbon material.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
PeLePera feeling
[How is it used?
Looks good but peLePera-like.
Was the one you received as per Image?
Yes, I have. I just want it to feel a little more rigid or solid.
Was the installation difficult?
Easy
How was your experience with it?
PeLePera-like
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
For the purpose of reducing embrittlement
The product that there is Merit of the reduction of the embarrassment etc. by blocking the secondary air introduction. I bought it because I was concerned about the dong dong dong dong dong dong between the partial and AxelOff. As for the thing, it is just a board of Aluminum.
I had to remove the cowl, remove the tank, remove the air cleaner box, and install the cylinder while avoiding the rubber sheet on the engine. (Rubber sheet seems to roll up from the front of the body...)
As for the effect, the Response to the partial-AxelOff mentioned above was felt to have become Linear. However, as a Demerit, the exhaust Gas became quite smelly. Although this is unavoidable in the mechanism, personally, but Demerit is clear compared with the effect, and may return to the original...
In the first place, Dontzki should polish GEAR selection and Accelerator operation, or...
View detail
Handling Instruction Manual
There was an Instruction Manual for the installation, and we used it as a basis for the installation.
In my car, the depth of the screw hole of the body was not enough, and the installation was not enough according to the instruction manual.
I removed the OEM Radiator guard mounting collar and put it in between the two to solve the mounting problem.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZRX400, KAWASAKI NINJA250R, KAWASAKI Z250, KAWASAKI NINJA250, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z1000, KAWASAKI ZRX1200, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R, KAWASAKI Z1000, SUZUKI GSX1100S KATANA, KAWASAKI ZEPHYR750
Highly satisfied with the product.
I am using it on my ZX-10R 04. It gives a more luxurious feeling than Black Plastic of OEM. As a result of examining with other brands, I decided on K-factory although the price is a little high. The degree of satisfaction is high. When you ask the shop to change the oil, you should ask them to say a few words because it seems to be scratched when the tool is applied directly to it. (I did so myself.) View detail
The costumer is the worst.
It is for YZF-R1 after '15 MODEL, but it is installed in R1 of '11 MODEL. Although it is named asellationCap, it is possible to use it if size fits because it is just a rubber cap.
The adhesion at the time of wearing is good because of the soft rubber, but I am a little worried about the durability.
There was an effect as an after fire measure by the Exhaust System replacement, and the explosion sound at the time of Axel Off was gone. However, in order to Cancel the system which was introduced in order to conform to the exhaust gas regulation, if you install this, it will be NG, so please be careful!
I couldn't find a suitable Cap and tried to buy one, but I'd have to second-guess the bullish price tag of 2,000 yen (excluding tax) for a Rubber cap and two Hose Bands. If you are bourgeois, go ahead!
View detail
It was a pimp!
The Installation Instruction Manual was also polite and the product was pimped out.
The disappointing part is that the seal on the manufacturer's name came off after just one day of running, and the price.
View detail
The thing of this hand - - -.
Since Guards of this kind are almost the same shape, Design, Material except for expensive Manufacturer, we tend to choose a cheaper one if it is the same price band. Afterwards, it seems preference of Manufacturer logo. I tried compared with a person wearing other Manufacturer, but there is no special difference. View detail
Z900RS, I want to install it from car delivery so I bought it in advance.
Z900RS, although it is still delivered, since I want to install it from the time of new car I bought it in advance
There are Small Sudo Anti-vibration Rubber at 6 places, but since it is not so intimidating, shock resistant Tape yourself (Originally reinforced Seat of License Plate) I pasted all over the back
With this, I think that it is better not to interfere with the interference beacon between Radiator Body and Core guard
I want to report again after installation
View detail
Sounds alright
After Fire is gone. Emblem will also be Mild. The volume of the Exhaust System became slightly smaller.
When stopping with the Red signal, as decelerating, the number of revolutions rose in the vicinity of Idling and became unstable, so now I removed it.
View detail
. A little expectation......... It was Ha Gap
Products are at LePera
The installation is shallow on the upper part of the Radiator Body, the lower part is fastened to the Stay bolt, but the Bolt hole does not fit well,
Even after installation, it will be quite fluttering during running
An empty can rolls like......... Anything (X_X)
As a result, using various tools
Reduce the top and bottom
Tackle hard
We fixed the Bolt hole again and installed it
View detail
The position of the Screw hole was misaligned
I thought if I just hooked on the top nail and tightened it with OEMBolt, when fixing with Bolt the upper nail floated and it could not be fixed. The contents of the Instruction Manual are also written that it is different from the actual mounting method, after all, I finally installed the Screw hole. Because it is such a state it will be worried whether you can come off during driving.
I was sorry just because I picked up good ones and bought it..
View detail
Fits: HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
It is good for an appearance Dress-up
To the price, it is ba LePera.
I installed it on CB1300SF04, but the width is wide and if I tighten Bolt as it is it will deform the net. I put Washer in both and tightened.
It looks cool, it's Cool.
View detail
They are a thing with bad how to attach, and the touch which it did not fit but was attached forcibly.
They are a thing with bad how to attach, and the touch which it did not fit but was attached forcibly. View detail
Fits: KAWASAKI NINJA1000, KAWASAKI NINJA1000, KAWASAKI NINJA1000SX, KAWASAKI Z1000, KAWASAKI Z1000
Since it was before wearing, evaluation was set to 3, but it is indispensable when the good Muffler of an omission is put in. Since he skimped on thousands of yen, it was afflicted by the After Fire. Although in play [ detailed ] is updated after
Since it was before wearing, evaluation was set to 3, but it is indispensable when the good Muffler of an omission is put in.
Since he skimped on thousands of yen, it was afflicted by the After Fire.
Although in play [ detailed ] is updated after
arrival, I consider the vehicle type with secondary combustion functions as it is better to purchase without worrying.
It becomes time and effort twice like me.
(Tear)
View detail
Compared with the pure core guard, it became a quite good dress-up up. As for the thing which may be said For the radiator to have tried to want to become a new article only by changing a core guard and which is 笙ェ Wanted to take care, a pure twist bo
Compared with the pure core guard, it became a quite good dress-up up.
As for the thing which may be said For the radiator to have tried to want to become a new article only by changing a core guard and which is 笙ェ Wanted to take care, a pure twist bolt loosens easily.
While I also ran, one bolt dropped and it carried out stripes ..
Although it is slightly expensive .. 笙ェ which I regard as preventing the direct hit of a stepping stone and becoming a good dress-up up
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
Although it attached alone and being carried out, troubles were suffered considerably. I think that it will be an easy victory if there are two persons. Since pains was taken over slightly expensive thing and attachment, *** was used. Does it
Although it attached alone and being carried out, troubles were suffered considerably.
I think that it will be an easy victory if there are two persons.
Since pains was taken over slightly expensive thing and attachment, *** was used.
Does it become an accent although it is a portion which is not visible?
View detail