Reviews
Improved rigidity
Cut-out improves rigidity.
I'm satisfied with the performance, but
The Slider that I originally had on can no longer be attached.
I asked the Manufacturer and they said it doesn't even come with a KFACTORY Slider.
That's a bit of a demerit point.
I can no longer fall over carelessly.
View detail
I'm glad there's no Rust.
I replaced them together when I put on the same KFACTORY engine hanger.
NORMAL is made of steel and will rust.
I'm glad this is Stainless Steel so it won't rust.
View detail
It won't rust.
I replaced the Bolt with KFACTORY's Engine hanger when I replaced it with a KFACTORY Engine hanger.
It doesn't rust, which helps.
You don't have to worry about compatibility with the company's products.
View detail
Improved rigidity
I am satisfied with the product itself.
The rigidity is increased and the appearance is tightened.
But there is no Slider- that can be attached to this.
They don't even get the KFACTORY ones from the same manufacturer.
That's a shame.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZZR1100
Very easy to install.
The cost performance is very high compared to other products.
The installation took about 5 minutes and the product itself is high quality and I like it very much.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZRX400, KAWASAKI NINJA250R, KAWASAKI Z250, KAWASAKI NINJA250, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z1000, KAWASAKI ZRX1200, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R, KAWASAKI Z1000, SUZUKI GSX1100S KATANA, KAWASAKI ZEPHYR750
It looks good, what's the price?
I like the design and appearance of the Large It's easy to install
If I had to choose, I would say that the price is high, the Material:If it's Titanium, I guess it can't be helped
View detail
Fits: HONDA CB1300 SUPER BOLDOR, HONDA X-4, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF
Do you care about looks?
It's surprisingly nice It's a good costumer and I bought it for its looks, so I'm happy with it first True, with Titanium, it is several times more expensive, so we will start with? Until now, Material:It was Aluminum, but the product is Stainless Steel But overall, I am very satisfied with Large
Four stars for quality, because Washer put two on it!
View detail
Very good compared to the OEMOption
I have been using OEMop's Core guard, but the OEM has coarse eyes and the guard It had low performance and was vibrating and making noise because it was not protected against vibration
KFACTORY's core guard has a fine-grained eye and is expected to provide good girth performance Stainless steel for good texture and anti-vibration measures to eliminate unwanted noise It was
The only thing that bothered me was that the packaging was well packaged, but the edges were probably from storage was slightly bent It is thin Stainless Steel, so I bent it to fix it, but it didn't come back clean
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZZR1100
The sound of the Camshaft Chain disappears completely
I've been riding for many years and had almost given up on the Engine sound
Because it's Kawasaki I kept forcibly convincing myself that it was a good idea, but this time I bought it with a straw in my hand!
Installation is a breeze - CamChain Adjuster from OEM (They say it's Auto, lol ), pull out the Bolt in the middle of the Bolts, take out the Spring and shaft inside and replace it with this one Only If you tighten the Screw by hand, there is a point where you can feel a good response We will go with the adjustments without being greedy
The sound is quieter for Large and even if you ride a little harder, Valve Perhaps because the timing is not off, the sense of power is solid
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZZR1100
The sound has stopped
since before "Rattling.. and I have to adjust Tappet and Adjuster quite often It was a stopgap measure, but it only got better for a moment
When I installed this one, the sound stopped
If you're struggling with the sound of a NINJA-type Engine, I recommend it!
View detail
To prevent rust
I was worried about the rust, so I had to change the engine hanger to KFACTORY's one I also changed the Bolt to match I'm glad I don't have to worry about rust now View detail
Improved rigidity
When the engine was lowered, I changed the Hanger to a cut-out one Even if it is running, I can feel the snap feeling However, MORIWAKI Slider is not able to be installed at the same time i heard that the slider of kFACTORY is not able to be installed because it is for OEM Hanger It is regrettable View detail
Fits: HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA X-4
heat treated crankcase bolts
The bolts are made of stainless steel, so they are a little lighter than the original ones made of steel. Old bolts have corroded over the years and did not look very decent. After installing new bolts, the appearance has changed and became elegant. You need to install it sequentially, unscrewing the old bolt and tightening the new one one at a time. one to avoid oil leakage and replacement of the gasket. When installing, you need to use a special fixing paste so that the bolts do not stick to the threads of the crankcase holes over time, this can make it difficult to remove the cover if necessary. The bolts are made of stainless steel, so they are slightly lighter than the original ones from steel. The old bolts have corroded over the years and did not look very decent. After installing the new bolts, the appearance has changed and become graceful. You need to install it successively by unscrewing the old bolt and tightening a new one one to avoid oil leakage and gasket replacement. When installing, you need to use a special fixing paste so that the bolts do not stick to the threads of the crankcase holes over time, this can make it difficult to remove the cover when necessary. translated by Google Translator View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
You were right to install it
The installation process is a bit cumbersome for the thing, but the effect is satisfying
Large It's not a big change, but you'll notice the change as soon as you start running
It's a small thing, but it's a small thing, because it reduces the After and makes the movement of the Motorcycle more natural
I don't have to worry about the Axel operation etc. anymore than before
The appearance after installation is SMART and the price is not that high
easily I need a more natural ride I recommend it to anyone who thinks that it is a good idea
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Normal
If you are replacing the Full Exhaust System, this is a Recommendation It could be a lid on the Hose, but I wanted to make it as normal as possible, so I decided to use this As for the secondary air system, there may be pros and cons, but I don't think there is any extra mechanism like this one It is Maybe now the fuel tone is normal, if you don't care about the speed limiter, Full If you put in the Exhaust System and install this lid, it will be enough View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZZR1100
It's convenient
It's very good for vehicles with high mileage and a stretched Camshaft Chain It's quiet Looks are a matter of taste, but not bad looking View detail
K-Factory engine hanger front for Kawasaki Zephyr 750
The product has a good finish and it looks very good on the bike. I put the product on a libra and the pair of holders weights exactly 0,384 kg. By the product there is also a set of bolts and nuts (3 bolts from stainless steel), which can be used by the assembly of the bike. I used 2 bolts which came in this set with nuts. Unfortunatelly couldn't use the 3rd bolt with dimension M10 x 115 mm, because it's too short. Therefore I had to buy a bolt M10 x 130 mm, which fits perfectly. Beside this minor trouble, everything else was OK. I recommend the product to other Zephyr drivers, who would like to customize the bike. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZZR1100
I think it's good
I destroyed the OEM Nut and replaced it It was no different than OEM Parts in price, so I bought this one It's nice to be able to adjust them arbitrarily View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200
Peace of mind with Titanium
NORMAL is painted on Iron Pipe, but the front wheels are painted with sand and small stones that are rolled up was peeling and rusting
If the rust continues to develop, it will cause water leakage:I replaced it with this one from Titanium
Great texture, but unfortunately it's almost invisible when you wear it …
It's all good because it's self-congratulatory!
View detail
K-FACTORY Radiator Side Cover
The radiator side cover was purchased because of its beautiful color, and the photo and the other side were very bad to install because of the radiator lid. It was very disappointing because it was attached and scratched all the surface of the product and was unsightly mounted. View detail