Reviews
for Repair
Very good product. I will buy again when I have a chance. View detail
Cooler than other Manufacturers
I put it on my FZ1FAZER. engine slider is to cover the engine when it rolls over, so the fashionability may be secondary, but I think it should be cool if I put it on. KFACTORY's Slider comes with a silver-colored design cap (attached with double-sided tape at the end). The body itself is not too long. The FZ1-specific bolt is also included for installation, and it fits perfectly. I don't want to scratch it = I don't want to rub it. View detail
Fits: HONDA CB400Super BOLDOR Revo, HONDA CB400SF VTEC, HONDA CB400SF Revo, HONDA CB400
K-FACTORY Engine Slider
Fitted on my Cb400 Revo 2021 item fitted perfecly not only its nice but give adequate protection. Quality is equally to its price. Anti loose bolt is given to keep slider intact! View detail
Small, no eyesore!
I chose something as inconspicuous as possible, and the small size is good without being obtrusive.
I won't know the effect until I fall...but it seems to protect the Engine itself.
Clutch cover is not good.
I think this is enough insurance in case of emergency.
If you are unsure, we recommend a solid Engine Guard.
View detail
KRT.SE requires OEM parts for the standard ponting
For vehicles equipped with OEMSlider, it can be removed and simply attached.
Side cowl can be removed without removing it.
Dress-up even a rugged slider by attaching an Emblem to the slider, and the price is Reasonable.
Since it is an OEM base, I think the installation method was considered to reduce damage to the frame, but the effect of the Slider will not be apparent until the moss is removed.
View detail
Used for STREET TRIPLE
I bought this for my Triumph STREET TRIPLE.
The part used was attached to the Axle Shaft of the Rear.
In a DIY job, I threaded all the way through the Axle Shaft and attached the DURACON I bought to each end of it.
The Swing Arm interfered, so I put a 27mm Socket in between, and it was very stable and easy to install.
It popped out a little like Peg, but when I knocked it down, I installed it on the ground together with Engine Guard, and the car body was not damaged. Especially the footpeg, before I put this DURACON like Peg, the footpeg hit the ground, and the footpeg was broken many times, and repairing and repairing was very Large, but it did not hit the ground at all, and it became the best finish.
Also, I've tried several Chinese DURACONs on Amazon, but they all shattered in one shot and were completely useless, but this product has a solid weight and doesn't seem to break easily. I'm glad I bought it.
View detail
I prefer it if it doesn't look too obvious.
I went with this one because I like it to be modest and not stick out too far from the body of the vehicle and not be too noticeable. I don't want to knock it over or tip it over so I don't want to test its effectiveness. View detail
K-factory motor protection
Great product, very lightweight yet looks very powerful. Installation is no problem. Gives the bike a solid look. Great product, very light, although it looks very powerful. There is no problem with the installation. It gives the bike a solid look. translated by Google Translator View detail
It is favorite
I made it to this Slider because it was good that the bulge did not insist too much.
It will surely protect the Engine (desire).
I will not recommend to those who want a sense of security.
View detail
Fits: SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, SUZUKI BANDIT1200S, SUZUKI INAZUMA1200, SUZUKI GS1200SS, SUZUKI GSF1200
Good design without being too obvious
We won't know how well it works until we take it down
I think the design is good
Isn't that a little high? But I bought it and installed it
I was satisfied
And Axle Slider will be bought later on in the same Brand
View detail
I would recommend it.
Easy to install! Do not even insist on looking good just right!
I think that it is a good item in Simple.
There are few protrusions, Size that protect Engine Limit.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
I do not want you to be active
Although it is said that 1 pc each Bolt should be removed and exchanged, but since it was impossible to exchange at 3 places with Rose Rose, we removed and removed 3 at the same time.
Be careful as it may cause burns if you do not do it in the state that the Engine is cold during replacement.
If you tighten too fast with tightening after replacement to the included Bolt, it will be hard to use Torque wrench.
After exchanging the test run repeatedly to ensure that there is no leak of Oil.
View detail
Well this is the easiest slider to install compared to other brand like OVER... u just need to screw off one screw and put on the slider dont need to take unscrew other parts... well just hope i wont far so i wont need it lolz but for this price and nice
Well this is the easiest slider to install compared to other brand like OVER... u just need to screw off one screw and put on the slider dont need to take unscrew other parts... well just hope i wont far so i wont need it lolz but for this price and nice quality i will paint the silver part later View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R
I'm glad I could have Slider
I was wearing it from the second hand purchase, I was feeling Attachment, but I got stuck up the other day, but thanks to Slider I was saved without becoming a fatal large expenses. When it started off after a break at commuting time, it flew on a light downhill slope, I could not comprehend that I fell to Right Side and it gave me a feeling like putting Motorcycle slowly.
Parts who passed away were only under cowl of Right, others were in a state close to free of charge. Without this Slider, Right Side's CowlUpper, Center, Under and Blinkeretc. I think that it was good to have it wearing if it thinks that it went to the worst case to Tank.
The Slider itself was about a little rubbed by Black Jura. I think that it is a lossless parts that are attached like a cane of a forefather.
View detail
No doubt for K-factory products. This engine slider is most beautiful compare with other same type products. Very high quality and protect your bike efficiently when your bike fall down accidentally.
No doubt for K-factory products. This engine slider is most beautiful compare with other same type products. Very high quality and protect your bike efficiently when your bike fall down accidentally. View detail
When the slider would be only appearance, it made light of and had not equipped. But it actually fell and considered wearing of the slider seriously with charm feeling in case of emergency by the numerousness of parts and the numerousness of the amoun
When the slider would be only appearance, it made light of and had not equipped.
But it actually fell and considered wearing of the slider seriously with charm feeling in case of emergency by the numerousness of parts and the numerousness of the amount of money for restoration to restore.
If in play, an attachment picture, etc. are seen at such time, and the blackout of love at first sight and the spacer is carried out and it sees from a transverse plane, it is seldom conspicuous, but if it sees from just beside, the emblem cap is attached to the slider body and it is conspicuous compared with the product of the other company.
It is effective to a dress-up up.
Although the damage mitigation effect to the car body at the time of a fall is first, of course, doesn't this one want to experience an effect not much?
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
Although the exception maker's thing was attached before, a design and quality were considered and replaced. although the slider itself becomes construction material = quality, or it finishes and comes out -- an attached bolt -- it is -- details are a
Although the exception maker's thing was attached before, a design and quality were considered and replaced.
although the slider itself becomes construction material = quality, or it finishes and comes out -- an attached bolt -- it is -- details are also good -- it can do -- it is -- since -- I recommend you here.
View detail