Reviews
It is good to be normal.
I am sorry to Webike, but I installed it because it was new and cheap at a certain Oak Auction.
I am posting this because there were no imprements.
As you can see in the product image, the parts are carefully selected.
(Aluminum Shaft to connect, Aluminum Washer to tighten the Bolt, etc.)
There is an instruction manual for the work, so there is nothing to be confused about.
Since it can be attached to SMART, it is more like a dress-up part than a slider.
View detail
countermeasure against standing up
Coloring also matched Cafe in Black??Gold.
We won't know the effect until we take it down, but installing it as an insurance policy gave us great peace of mind.
View detail
_TS.jpg)
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
for safety lift
The surface is very clean, and the installation is very easy. Fasten the enclosed bolt to the swing arm. The surface is smooth and beautifully finished It looks strong enough. The lift requires a spool-shaped hook receiver. Please refer to the picture Also, if you apply rock tight when you do bolting I think we can prevent loss in advance. View detail
Installed on SEROW250
Since DAYTONA's EngineSIDEGuard was already installed on SEROW, a simple Under Guard was installed.
Installed with 4 Screws.
It is Simple, but when it is running, it makes a clunking sound, so it seems to be Guarding the Engine.
View detail
Fits: HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA X-4
k-factory stuff was always good
The left and right sliders are very light and neatly injected. It's simple to install it by putting it in the left and right holes of the front axle. I have z900rs, but I changed the front suspension to raise up light I bought it for cb1300sb and installed it. The middle gold metal ring has a very good design. View detail
light
I used to use Stainless's Other Brand Product, which was the same 30mm long, but it was refracted and lacked the actual length.
This product is lighter and straighter than that, 30mmLong, so I could get the length I wanted.
View detail
Satisfied
This is what you get when you Lowdown.
I like the casual Mark!
View detail
Nice fit.
Slider fitment can make the front lower part look more solid and fuller. insurance that will protect against unexpected damage. View detail
I think it's the Front Axle Slider from Best Buy.
Someone has already written a Review, so here is another perspective.
Front forkBottom and Brake Caliper are not affordable to replace with Wound.
But when I tried to buy a Slider for that purpose, it cost me 15,000 yen for two small chunks of DURACON and a mere stick of All Screw in a Vinyl bag. I was like, "Are you going to pay 15,000 yen out of the small amount of money you have in your pocket? It was an Image like that.
The quality of each part is so high that it can withstand the act of looking at it next to the PC until the day of installation after it arrives.
The shaft is not just an all screw, but a machined aluminum alloy shaft, so I did not use the included stainless steel screw, but prepared a separate Duralumin screw to assemble the shaft.
This is a great QUALITY product as others have stated in their Reviews.
Before purchasing the product, I was a little concerned about the Logo, which is often noticeable in photos, but in reality, it is a small one, so it is not particularly noticeable.
Anyway, we strongly recommend this product to those who are not sure which front fork slider to choose.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
Kayfak BirdFront Axle Slider
I bought it because I like the Anodized in Gold. the Gold is not too dark. I think it has excellent protection against falls. View detail
Z900RS CAFE Don't miss the 2023 color!
This would be the kind of product that is for the Z900RS CAFE 2023 color.
I like the elegance of the color distribution that is not all Gold.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R
K-FACTORYAxle Slider
I've been using K-Factory's Slider for years, and it's quintessential quality! Beautifully built! No doubt about it! View detail
![[Repair] Duracon (R) for Engine Sliders](https://img.webike-cdn.net/catalogue/images/62290/000LZBH0_TS.jpg)
for Repair
Very good product. I will buy again when I have a chance. View detail
Z900RS 50th Fork Slider
I installed it on my Z900RS 50th with the purpose of dress-up and to emphasize the appearance. View detail
Fits: SUZUKI DL1000 V-STROM650, BMW S1000RR, BMW S1000RR, KAWASAKI Z1000, KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6R, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-S1000F, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX250R, SUZUKI SV650, SUZUKI DL1000 V-STROM250, KAWASAKI KB4, SUZUKI GSX-S1000
That's cool.
I am installing it on a ninja1000-2019.
It looks cool.
It is pricey, but I am glad I chose this one.
It has only been STAND used a few times. Durability will be confirmed in the future.
View detail
Best for Z900RS 50th
I installed it on my Z900RS 50th as a part of dress-up rather than as a fork slider. The color match with the gold wheel very well and it was a large success. It looks very Parenthesis. View detail
Cooler than other Manufacturers
I put it on my FZ1FAZER. engine slider is to cover the engine when it rolls over, so the fashionability may be secondary, but I think it should be cool if I put it on. KFACTORY's Slider comes with a silver-colored design cap (attached with double-sided tape at the end). The body itself is not too long. The FZ1-specific bolt is also included for installation, and it fits perfectly. I don't want to scratch it = I don't want to rub it. View detail
KATANA 2022, Gold color is MATCH!
I bought it not only because of its function as a Slider, but also because I liked the way it looked.
I like the look of the KATANA because the front fork is Gold for the 2022 model year, so it has a MATCH look.
I don't know how effective it is as a Slider yet, since it has not been rubbed.
The installation itself is easy, but the Hexagonal Wrench is a Quantity:2pc required
View detail
Design is very contemporary and up to date in function.
This axle slider is of exceptional build quality. Packaging is exquisite. Fit and finish is top notch! Design very beautiful in form and function. I like the way they anodise the metal on this set. Nicely done and will compliment a lot of bike colour schemes. View detail
Fits: HONDA CB400Super BOLDOR Revo, HONDA CB400SF VTEC, HONDA CB400SF Revo, HONDA CB400
K-FACTORY Engine Slider
Fitted on my Cb400 Revo 2021 item fitted perfecly not only its nice but give adequate protection. Quality is equally to its price. Anti loose bolt is given to keep slider intact! View detail