![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Conversion Spacer for Brembo Caliper](https://img.webike-cdn.net/catalogue/images/30656/id_1324_000wzcq001c_TS.jpg)
Fits: KAWASAKI ZRX1200, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Brembo caliper essentials
I was going to buy KOHKEN 18mm, but I chose this one because the hard anodized aluminum one was discontinued.
The thing is well made and just fit the OHLINS Fork.
Since it is made with high precision, I installed it by tapping it with a Hammer a little and press-fitting it.
It is better than I expected.
View detail
![Brake Switch Set](https://img.webike-cdn.net/catalogue/images/30656/id_1329_000wzcm001z_TS.jpg)
It can be attached to anything except brembo.
The description says that it is for Brembo and cannot be used for OEM products, but with a few additional parts, it can be used without any problem.
Unlike other products, this switch is OFF when pressed and ON when released. The eccentric cam can be adjusted so that the Stop-lamp can be turned on even with a delicate grip.
The appearance is also compact and does not spoil the aesthetics.
Neck is the expensive part. The cost of the parts should be at most 2,000 yen. Every Manufacturer has a high price tag, so I would like to see the price reduced to about half of what it is now.
View detail
![Reserver Tank Cap L-N](https://img.webike-cdn.net/catalogue/images/30656/id_386_000hzck003rtn_TS.jpg)
Fits: HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZRX1200, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI NINJA250R, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, KAWASAKI ZRX1200
kFACTORY Master cap
I was wearing Silver, but I liked Parenthesis so much that I bought Black as well.
Black was by far the better Parenthesis!
Demerit is a little pricey, but it's cool and Priceless!
View detail
![Front Caliper Support for OHLINS Upright](https://img.webike-cdn.net/catalogue/images/30656/id_2066_103vzcy020n_TS.jpg)
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200 DAEG
Works as intended
Works well and looks nice on my 03 ZRX1200R. The only problem is you have to source your own hardware (bolts). I would purchase again. View detail
![Master Clamp](https://img.webike-cdn.net/catalogue/images/30656/id_397_000hzbw006q_TS.jpg)
Parenthesis OK
I like the shape, texture, etc. of the Tank Bracket and Parenthesis. View detail
![Front Caliper Support](https://global.webike-cdn.net/photo/impression/4d/4df4e460dc654263605416ec0ec3cc5eL.jpg)
good
I think it is thicker and more rigid than OHLINSOEMSupport.
It is also well made.
View detail
![Front Caliper Support](https://global.webike-cdn.net/photo/impression/25/256d98fe878e27fb873969227021cafaL.jpg)
The price.
I am very satisfied with the design and accuracy.
If anything, the price could be a little lower.
Nah. To the Co-Ownership.
View detail
![Reservoir Tank Cap M-N](https://img.webike-cdn.net/catalogue/images/30656/id_388_000hzck002rtn_TS.jpg)
Fits: YAMAHA MT-07, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-10, YAMAHA XSR900, KAWASAKI Z1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI ZX-25R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, SUZUKI GSX-R1000, YAMAHA MT-10 SP, YAMAHA YZF-R1, YAMAHA Z250, KAWASAKI NINJA250
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
K-FACTORYReserver Tank Cap M-N
The Demonstration car at Events had these on, so I thought it would be a good one to see and touch to confirm the product.
It took about two weeks to deliver the product because it was out of stock.
Installation Manual is not included, as it is just to replace the screw type lid.
You will need to remove one screw from the Tandem Footpeg during installation.
It is because it interferes with Tandem Footpeg when removing the lid of the Reserver tank and is in the way. I think that it does not stick unless it is removed.
The Tandem Footpeg is a hexagonal Screw, but is it too hard to remove? You don't have to worry about "what to do". Even a woman can get it off with a little effort.
If you remove one screw, you can shift the Tandem Footpeg, so you can replace the Reserver Tank Cap.
I don't know what the name of the rubber is on the inside of the OEM lid (the leak-proof rubber), but it's easy to remove by hand.
Remove it and implant it.
I didn't take any pictures on the day of installation. This is a black plastic lid, so it looks very different from the gold one.
The price is 5,720. kfak, if you look at the review of other products, it says it's expensive. If you say so, just lower the pricing by another 500 yen or so and they won't say that anymore. I was not sure about this, but I am happy with it because it is a good product that installs perfectly and nicely.
View detail
![Front Radial Caliper Support](https://global.webike-cdn.net/photo/impression/b1/b1415683b69b7956b3929e56f3e6919fL.jpg)
Fits: KAWASAKI GPZ900R, KAWASAKI ZEPHYR1100
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Rigid and powerful!
I installed it on a 1991 ZXR750R.
It was Bolt On with a 320mm Disc Rotor and 55mm Mount Bolt.
The brembo 108mm MonoblockRADIAL CALIPER is installed on the Caliper, and it has no problem with its effectiveness and control.
View detail
![Front disk rotorShim](https://global.webike-cdn.net/photo/impression/2b/2b2b49e835429cd028f44c2182718938L.jpg)
Fits: HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
reluctantly
I had no choice but to use this product to get the Caliper and disc Center out
I didn't want to put anything extra in between, but I feel more comfortable with the Center showing I chose to use it because of the feeling
View detail
![Front Caliper Support](https://global.webike-cdn.net/photo/impression/2f/2f5e3c17070405f611684fa5302df430L.jpg)
Large changeable satisfaction
Brembo caliper I bought it for installation. It is also excellent in Cost performance, it was able to be used without any particular problems such as quality, accuracy. View detail
![Front Radial Caliper Support](https://global.webike-cdn.net/images/reviews/564/00001002564L.jpg)
A fantastic bit of kit, exquisitly manufacturered its almost a work of art. Use it to attach Brembo monoblocks to your ohlins rwu forks under the gold moon of ohlins lol.
A fantastic bit of kit, exquisitly manufacturered its almost a work of art. Use it to attach Brembo monoblocks to your ohlins rwu forks under the gold moon of ohlins lol. View detail
![Brake Switch Set](https://img.webike-cdn.net/catalogue/images/30656/id_1329_000wzcm001z_TS.jpg)
There were an Egg type thing of the Black alumite inserted in a Brake lever and one thing in which close does not have a Screw attached to this. It is troubled very much.
There were an Egg type thing of the Black alumite inserted in a Brake lever and one thing in which close does not have a Screw attached to this.
It is troubled very much.
View detail
![Master Clamp For Brembo](https://global.webike-cdn.net/photo/article/57/1369327823857L.jpg)
When it equipped with the Radial master of a brembo, since the Mirror holder was required, it purchased. type is pleasing and it is thought to me that a Parenthesis is very good. Since I thought that structure was also polite and suit
When it equipped with the Radial master of a brembo, since the Mirror holder was required, it purchased.
type is pleasing and it is thought to me that a Parenthesis is very good.
Since I thought that
structure was also polite and suitable for a price, it was not thought that it was high.
It is the
Recommendation -
View detail
![Brake Switch Set](https://global.webike-cdn.net/photo/article/69/1364715535969L.jpg)
the place which was looking for the Switch used for a Brembo racing master -- -- it came against this product. Although Switches various until now were tried, they were only not quite satisfactory things, such as what a terminal is crazy or spo
the place which was looking for the Switch used for a Brembo racing master --
-- it came against this product.
Although Switches various until now were tried, they were only not quite satisfactory things, such as what a terminal is crazy or spoils the form of
Brembo-master Original.
Adjustment of this Switch is also dramatically easy to Kami with simple structure.
The settlement condition at the time of attaching is also dramatically compact again.
It is used for both the
Clutch and a Brake.
A photograph is a Clutch side.
View detail
![Front Caliper Support](https://global.webike-cdn.net/photo/article/26/1361793778526L.jpg)
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1200 DAEG
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Although it is markedly cheap compared with other Supports, construction material is a product made of super-々 Duralumin, and, as for thickness, intensity with about 19 mm is also made firmly. The Design is also dramatically beautiful, and is excelle
Although it is markedly cheap compared with other Supports, construction material is a product made of super-々 Duralumin, and, as for thickness, intensity with about 19 mm is also made firmly.
The
Design is also dramatically beautiful, and is excellent in a Cost performance, and the reason for not buying this does not find it.
♪ which is this Support Recommendation
View detail
![Master Clamp For Brembo](https://img.webike-cdn.net/catalogue/images/30656/id_395_000hzbw002q_TS.jpg)
Although it was used for Brembo radial brake master, structure is solid and appearance was tightened around the handle. It is recommended for a little custom. However, since I think that it is somewhat expensive, it is considered as four stars.
Although it was used for Brembo radial brake master, structure is solid and appearance was tightened around the handle. It is recommended for a little custom. However, since I think that it is somewhat expensive, it is considered as four stars. View detail