Reviews
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Replaced from Chinese
I bought it after seeing other people using it at Motegi. Unlike the Chinese Hook, the J-TRIP Hook has a step to prevent the swing arm from hitting the swing arm. What I didn't understand was that the Hook has a double structure with a collar inside, but since the Hook doesn't rotate, I am wondering what the collar is for. I also think the price is a bit high. Well, I am satisfied with it. View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
I know it's not the same application, but this one helped me!
The other day, when I was in a fender bender with a car and fell, this Hook bolt was deformed but the Swing Arm was unharmed.
I guess the original purpose of this product is to be used as a Hook when raising the product in STAND, but it was helpful to play the role of a Slider.
However, as may have been mentioned in the product description, the clearance may not be sufficient and the STAND may interfere with the Swing Arm if it is used as a Stand Hook as it should be.
I don't want to bother you again, but I am still wearing the same one after the accident.
View detail
Sure, it's easy.
I thought I could do without it, but when I used it, it was much easier than I had imagined. View detail
Should be replaced promptly when old.
The company's Maintenance Stand, which has been used for many years.
The rubber at the tip of the V-receptacle also deteriorates as it is exposed to the wind and rain over the years.
Repeated use of the product in a battered or detached state can lead to damage to the vehicle, so it is best not to be stingy and replace the product when it is cracked or comes off easily.
When you replace the product with a new one, you will still notice the difference in quality from the deteriorated product, and this alone will somehow restore a sense of security.
It's just a tip rubber, but it's a tip rubber.
It is a good idea to replace it promptly without being stingy in order to protect your car.
View detail
Required by Maintenance/Circuit.
If you do your own maintenance, you will need to do it,
I think the longer one can hang STAND with lighter force.
The construction is solid and secure.
I think it will last a long time. It's a little expensive, but...
View detail
Fits: KAWASAKI BALIUSI, KAWASAKI ZEPHYR400 χ, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI , KAWASAKI XANTHUS, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZXR250, KAWASAKI ZRX400
For future maintenance
Purchased in anticipation of future maintenance using the Maintenance Stand.
Installation is as simple as tightening the bolt.
View detail
J-TRIP J-Trip JTrip Short low Ra Rear Tan
We used to use a certain A0-tro product, but its strength was not good enough, so we were considering J-TRIP, although it is more expensive.
After purchasing the product, I am very satisfied with the stability and the ease of raising and lowering the product on a Large Motorcycle.
View detail
JTrip L-Shaped Receptor
Rubber that came with the original (Red) I bought a replacement because the "Black" part was falling apart and I had never seen a Black Rubber before I learned about WeBig. View detail
Convenient
I bought it for Chain refueling and washing for Vehicle. View detail
I am satisfied
The packaging material has a Cigarette smell as others have mentioned? If JAPAN is a feature of this product, I would like to use it.
The body is solid and even a beginner can handle the assembly. I wrapped it with rubber mat to protect the installation area. I haven't put my motorcycle on it yet, but it fits EXACTLY in a tentative fit. The height is the lowest position in the 3 levels of holes, and the width is the widest position, which is almost the width of the largeest hole. There is still room to spare.
View detail
Used for Tire warmer
I use it on my Ninja 250SL that I ride for Circuit Racing.
This is a product with excellent cost performance
View detail
This is good!
There is not a lot of work involved in removing and installing the rear tire, but when it came time to take it off, it was very tedious to install.
・Quantity:Pair (for Left and Right) Wheel spacer of the disc is inserted into the RearBrake Pads while lifting the heavy Rear tire (while putting the toe under the Tire) so that the disc does not fall off→while the hand pulls and pulls the Axle Shaft into position→. Somehow it went in and finished. My back hurts (lol) and I'm sweating in the summer.
This is why we purchased this product, which has a reputation for making work easier.
Indeed! It's so easy! Almost no force is required.
Place the Lifter at the Center as much as possible in advance, as shown in the second image.
The Tire is also placed near the Center.
Push in the Lifter and adjust it to the lowest position on the tilt and engage the drive chain.
This time, pull the Caliper support toward you and set the height and other parameters in the right position to the quantity.:Set。
Then, while checking the disc and spacer, move the Lifter back and forth, up and down, and confirm the position where the Axle Shaft enters.
That's all!
The Tire is mounted on the Lifter, so you can check various positions with ease while moving the Lifter with one hand.
In the third image, the Axle Shaft is only halfway in, but on the other side, the hole position is already aligned and the shaft can be easily inserted by pushing. Naturally, no plastic solder is used.
You can see how easy it is to take a picture without letting go.
I am by no means a Manufacturer's spinner.
But it was really easy and effortless to install.
Notes
If you are using the roller stand at the lowest position, it is better to move it up one step, because the Lifter will be inserted and the height of the Tire will be raised, making it very difficult to hang the Chain. (Experienced).
When moving the Lifter back and forth, the weight of the Tire is applied, so it would be smoother to slide the Lifter with a piece of corrugated cardboard or the like underneath.
I would like to buy it for about 8,000 yen because I use it infrequently, but I highly recommend it to those who remove and install the rear tire by themselves.
You can easily remove it!
View detail
Garage is Race ish and feeling great!
It is useful for maintenance of the Motorcycle in an upright position. It makes it easier to clean the wheel along with maintenance. View detail
Short low ler takes up little space.
The lightness and ease of handling are impeccable. I am satisfied.
I use it on my Racer, but it is also useful when I carry it on the Transporter because I can hang it on my STAND.
View detail
Share No. 1 is no joke.
Certainly, it is more expensive than Chinese STAND sold by other overseas Manufacturers or on Amazon. I had been using other manufacturer's STAND because I could not afford it, but after using it this time, I found out that there is a reason for the price.
The lightness, ease of lifting, and ease of handling all exceeded the STAND I have used in the past.
I thought that the quintessential "FOR JAPAN MODELShare No. 1" was not a date.
View detail
It's safe to say that it won't come off.
As the name suggests, we believe that first-timers can STAND on it.
The biggest problem with stand hanging is that the stand may slam when hanging or removing the stand.
The Axle Shaft is hollow, but this product does not have that flap, so you can concentrate only on not knocking over the Motorcycle, which makes the Large change easier on your mind.
I initially tried to use a rear stand from another China product on my 212 kg motorcycle, but it wouldn't lift up at all, so I bought this product.
However, since the Chain Tension adjustment does not allow Axle Shaft Access, I think you will need a Bracket for the L shape or Hook so far.
The quality of this product is very good because there is less shock when lifting up and taking off. I think the quality is very good.
View detail
I like the CHIC Black!
Familiar with Maintenance Stand JTrip." The Short lowler Rear Stand of the
I used to use Long Type, but I wanted a compact Short Type, so I replaced it.
such as the V-supply. "Taken." I chose this product, which does not come with a receptacle, because I already have a I was also happy to see that this product comes in a choice of Black.
After opening the package, the Roller part needs to be assembled (easy).
It's hard to explain, but I liked the texture of the Roller. It's easy to use and seems to have a luxurious feel.
Naturally, it required more force to Lift up compared to the Long Type.
I liked that it rose to a good height with the lowest height adjustment.
If you have a large work Space or storage area, you may want to use the Long Type.
View detail
It's jBird with peace of mind.
The Large body can be used for vehicles with a hole in the bottom of the Bottom case.
It is highly universal, so it is convenient to have one.
View detail
J-TRIP Short roller stands
I used it to replace the Exhaust System on my Z900rs, and in combination with the V-shaped Hook, I was able to stand it up by myself without any problem. The price is not cheap, but it was a good decision to buy a new one from Webig because you can't find used ones on Yahoo Auctions or Mercari, and even if they are listed, they are full of rust and the price is high for that. View detail
Looks strong
If you order this Check your hooks diameter first, Looks strong and When lift up, it's solid without shaking. Don't forget to check the internal diameter size of the swing arm's hook and then jive it out of the two models from j-trip View detail