Reviews
A hole of 12 mm or more is required
Unfortunately my Motorcycle (Goose350) The Beginner Stand Receiver (Set of Right and Left) I could not use it.
Left Side does not pass though PenetratingShaft goes through Right Side. Quantity : Pair (for Left and Right) The diameter of the hole is different. - - - Why Mr. Suzuki ?? To pass through PenetratingShaft, a hole of 12 mm or more is necessary.
Included Parts of STAND without previous Roller : Since it can be used as it is, Lift up with Y letter.
Making is solid and the painting is beautiful.
I saw Video but it seems to be enjoyable with Roller.
View detail
Satisfaction bought!
NINJA 2 Helmet50RR to Zentaiya's ZX-6RReplicaUpper Cowl equipped car!
Although I had a Rear stands, Front stand was holding on thinking about the price and frequency of use.
In replacing Front tire, I decided to purchase because I want to remove Front wheel !!!
We assumed that maintenance frequency will increase in the future.
We examined what kind of Manufacturer, but decided to J-TRIP same as Rear stands with emphasis on JAPAN reliability.
good point
- Even with Cowl can be lifted as it is.
- Can be lifted with light force
- There is Pipe strength
- Both SIDEHook in Hemp palm lock convenient
Good for temporary placement after removing Caliper
A bad point
- Manual manual Copy is too poor
It shrinks A4 further to A5 Thanks to SmallCopy, characters are small and it is hard to see
The important note is thin and can not be read at all
From the PL method - -
Supplement : I contacted Manufacturer and received it in PDF. Correspondence is good.
- Material : There are bubbles in PlasticTire (Really JAPAN?)
- Tire mounting parts color processing is 1 / 4 There is BALI and Bolt does not pass
In the corridor to be filly with File ,,, (Really JAPAN?)
- Interferes with Fender when removing Tire, it is safer to remove Fender from the beginning to prevent Wound
- expensive
View detail
Fits: その他 , YAMAHA V-MAX 1680, DUCATI SPORT1000, DUCATI PAUL SMART1000LE
Good shopping was done.
Because I am not used to it, I did not rise unless I got a lot of strength.
I think there is a problem with quality control.
The paint is peeling off and the color should be described as Lime green.
Welding etc. It is quite uneasy if it is the same.
View detail
Very easy to use!
I am using it for GPZ 900R.
Very easy to use, you can easily raise the Front and Maintenance will make progress.
I think that it is the case other than GPZ 900 R, but I have to think about handling such as Brake hose.
View detail
It can not be used for Maintenance around Front
20 years ago Material : I bought Aluminum 's Front stand, but on the first day I used it
The welding where the steering stem is supported is peeled off, after that the lower half is used as Rear stands and the upper part of the weld is continued to be used for Boots drying.
From this topic, the Front side has never used only the type supported under CaliperMount.
When M1100 was used, I used FTire exchanges with the same Manufacturer, but when Tire and Shaft are removed, the STAND will be distorted inward and force to the transverse direction will be applied to FFork.
Shaft did not enter and it was a hard time when I put on Tire.
This product is durable and easy to use and satisfied.
I am surprised because it lifts with a light force.
It is bulky because it can be kept upright when not in use.
View detail
Fits: その他 , YAMAHA V-MAX 1680, DUCATI SPORT1000, DUCATI PAUL SMART1000LE
Easy to use
For ZrX 1200 Zr X 1200 DAEG. Performance, ease of use etc.. Although it is perfect, the Red Vinyl part of the claws can be removed immediately. It is better if you take measures. View detail
Products with no losses
It is a product that I think it was good to buy it although it is a bit high product.
Chain Cleaning became easier at a stroke. You ought to buy this one as long as you buy a simplified version.
The disadvantage is that it is not a hook and it does not get caught in a hook and when you do not use it, it is about to raise yourself up and down alone. It can be anything depending on the ingenuity.
View detail
It is convenient to have
Purchased for cleaning of ChainMaintenance and Wheel of SUZUKI Goose 250.
Reception is sold separately "L-shaped" I selected.
So far "Roller stand" I was using Tire because it was hard to turn "
J-TRIPJTrip Short low Ra Rear stand "purchased.
It's the first Rear stands so we can not compare with other companies,
Even in the unpaved place in front of my house, I can easily Lift up by one person, and the car body is stable.
Speaking of "L-shaped" Because I care about positioning "V letter receiver" Was it better?
I felt that the price was a little expensive. But even so
I think that it will be useful because it can be used even if you change the Motorcycle if you have one.
View detail
Front stand of J-TRIP
? 【What made you decide the purchase?】
There are items of around 5000 yen in NetShop, but I made it reliable J-TRIP characteristics.
Moreover, Fender can be raised without hurting Fender with ForkUp.
? 【How was it actually used?】
I was worried that I could lift it well but I can lift it steadily by using with Rear stands. It is stable without fluctuation after lifting.
? 【Was it difficult to install? (Hard parts case)】
Just to be sure, you can lift without fear if you hold down Front tire or Cowl and lift it up.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
Butterfly Screw Since it is possible to change the width by tightening method, stabilizing by keeping the interval of Fork measured.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I want you to make it a little cheaper.
? 【Have you compared items?】
We also examined Front stand which lifts J-TRIP's Stem, but we made Cowl this item because it seemed to be Fender because of narrow gap of Fender.
View detail
Easy and convenient
I bought it mainly for ChainMaintenance of HONDA CB 400 SF.
I used a hydraulic for VehicleJack so far, but I purchased it because I was a bit uneasy.
It becomes an L letter hook, but because it was easy to assemble, there is also a little worry.
It is convenient because you can lift by yourself. Unlike Jack "It lifts instantaneously" I bought it and was right.. Even when removing it is easy.
I feel that the price is a bit high, so only MinusPoint became there.
View detail
Fits: YAMAHA , DUCATI MONSTER S2821, TRIUMPH DAYTONA675, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA SL750, APRILIA RS125, APRILIA RS250, YAMAHA , TRIUMPH Daytona 675, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750, DUCATI Panigale 899, DUCATI Monster 821, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750
As you intended
【What made you decide the purchase?】
It is hard to come off even if STANDVHook is applied. Large There is a good return.
A certain degree of clearance can be secured between Swingarm and VHook.
【How was it actually used?】
Appearance color (Gold) I like matches with other parts, so I like the appearance.
Actually applying STAND is a place where there is no choice but to get scratches in the Anodized section,
Basically only the lower side is hurt, so I do not mind seeing from the side.
【Was it difficult to install? (Hard parts case)】
Originally I cut the screw with the Tap of M6, so I could easily install it.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Because it is only tightening in accordance with the screw, there is no special hang.
As Aluminum Swingarm, be careful with tightening Torque.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Not subject to evaluation
[Is there anything I was disappointed about?]
Dimensions were also aimed, so it is not particularly.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Because it is an Anodized product, I think that there is no choice but to fade, but thank you for being more faded.
【Have you compared items?】
MORIWAKIEngineerRing Stand hook roller
[Others]
I was using the above MORIWAKIEngineerRing's Stand hook roller, but I was concerned that the return part was Small, but this Size is safe.
View detail
OK!
Vehicle is heavy, it is ZrX1200R which is difficult to raise. V - Up height was less than L receiving, and I was able to raise it overwhelmingly lightly. Hollow Shaft & I was thinking about receiving it for the first time, but discovering here and buying it was a correct answer. I thought that JTrip made a nice thing, but the price setting is too expensive. Recommended for those who are riding in the ekensen motorcycle. Risk at the time of Up and feeling of fear almost disappears, and it can be raised as a hyo. Up for the first time will be the same feeling. Since Tire can not be removed, do not throw away the L receiver and do not have it View detail
As you say for Stand for Beginner
Although I bought GSX 1300 R HAYABUSA but I did not have Center Stand, I bought this because Side Stand will take up the width for the convenience of the space of the Apartment's bicycle parking lot.
I tried it today with yesterday, but it is as easy as the product name. I stood easily as I did the video.
Here I write the points I dared to care about.
First of all, it is a bit Large stuff to pass a stick through STANDAxle Shaft with a narrow Space. Since it is standing by Side Stand, Motorcycle is not diagonally sandwiching a straight rod through STAND → Shaft → STAND hole on the other side, where Large strange. If it's wide, there is not any problem at all. If the whole work is 10, pass the bar 9 : I feel like launching 1.
Also, the price is high. Things are certainly good. However, more than 10,000 yen for STAND - - -. It is hard for my mentor. If you have a large space and you buy a STAND for Maintenance purposes I wonder if I will buy another cheap STAND.
Good things, so if you have a budget, you buy it.
View detail
good
To accompany Maintenance
.....................................................
View detail
It can be used without problems.
Grom is purchased because it only accepts L.
I was anxious at first, but it will rise without problems if I get used to it.
I'm putting Swingarm firmly, so there is no problem shaking it somewhat.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
It's a bit small, I can not..
I purchased it and purchased it like another car model because I liked it. Because the vehicle is Large, I feel a little Small a little, and I can see a little unreliable. There is no problem at all when actually trying. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Cover at the tip tends to come off.
Although there are also writes of others, Red Cover at the tip is easy to disengage, and additionally it has torn. I hope that you can make improvements. Other than that I am satisfied.. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
"easy" It is attached to one word of.
I used Kawasaki OEM's Maintenace Stand, but because I have a lot of steps to stepped in, I decided to buy this time because it will become unstable when I Lift and I will beat a single car. It is as easy as the title. When using the HOOK Hook attached to the hollow type Axle Shaft or EccentricColor Removing the Tire etc etc. There is also Maintenance which can not be done, but here is no problem at all.
Although the evaluation of the product itself is five stars, since the price is higher than the usual V letter Hook, it made it to four. In addition, the STAND of Kawasaki OEM is not compatible as the mounting part of the Hook is 25 mm square and the J-TRIP is 20 mm square.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
To accompany VHook
Select Silver according to the color of Swingarm
As for the installation, since the receiving side Screw on the Swingarm side is a little behind, we recommend using the color of the attached resin.
I was wondering if the place where VHook would take was going to be scraped, but I was not bothered.
Even if it is a functional part, it is not so conspicuous, it was good
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
It is exclusive for ZrX
It is a title street, is not it?.
Previously I had MotorcycleLift with ordinary V receiver.
There is nothing I can not do Lift.
But when you Lift Tire will rise dramatically from the ground.
You can also Lift "It will lightly rise" I was thinking that it is like this.
Again, exclusive items are different.
Before replacing it with an exclusive item, there was unstable Timing from the start to the completion of Lift, but it became possible to do without anxiety until it came up to Hook.
Since it is a moderate upward width, you can lift lightly from Dosun to Side Stand when you cancel.
Why are you thinking really well?.
Although it is in the Impre of the other person, there is a sense of welding place in proportion to the price.
There is no problem with the function.
View detail