Reviews
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Definitely!
It is indeed a ZrX exclusive product!
You can use it at a good height.
This will be for j-trip Wide Type only.
It cannot be given in a regular Short low ler.
Take care!
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
no problem
I used it on my Z900RS.
I had previously used an anodized swing arm hook on another motorcycle, but it originally interfered with the Jack, so it was scraped off and the substrate showed.
The swing arm hooks here are made of a plastic-like material, so the color did not peel off even after hanging jacks.
I was also satisfied that it was long enough to not interfere with the Swing Arm.
View detail
A classic?
I used it on a SEA BASS STAND, probably an OEM SEA BASS from J-TRIP that I purchased over 10 years ago.
I used to use a Swing Arm with a receiver on the Hook.
I bought a Ducati MONSTER400, so I bought this one too.
I could not find any Bolt on MONSTER400 that would attach a receiver to the Swing Arm.
Installation is simply a matter of replacing the Hook that was previously attached.
The Rubber seems thick and rigid enough to hang STAND with confidence.
I don't have a Spec. because I'm Firmly, but it would be nice if the price was a little lower.
Well, once you buy it, you can use it for more than 10 years.
View detail
J-trip after all
Smooth operation with less resistance when STAND is applied. View detail
Balance
I went with Magic because it is not available in Silver color, so I decided to go with Black. View detail
Used to float the Front with ease.
I purchased this product because I thought it would come in handy when cleaning the front wheel.
I like that it can be adjusted to fit the width of the Front fork.
However, when using it, the Rear stand must also be used in conjunction with it. Note that this cannot be used alone.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
Used for Z650RS
It is for Z900RS, but it was attached to Z650RS normally. View detail
That's jTrip, easy to get up there.
I bought this to raise the Front of my ZrX1200 DAEG.
As long as you know the hang, you can go up without difficulty.
However, since it is unstable when tilted in Side Stand, it must be used with the Rear raised in Rear stand.
Once you get used to using it, you can easily raise the front, which is very useful. It is expensive, but it is a good product.
View detail
Use at your own risk.
I bought a reverse attachment for the Rebel 1100 and used it, but the attachment on the Sprocket side did not fit properly and the tires did not rotate properly. I was told that if I put this Attachment for 250 or 500 on the Left Side and STAND-UP, it would solve the Stress problem;
I have not had a chance to try it yet, but I purchased it with a light feeling that if it does not work, I can just use the reverse Attachment.
The product is JTrip, so you can be sure of it.
I am satisfied with the Large change because the shipping was promptly done by WeBig.
View detail
I finally bought it.
I finally bought it.
I had been hesitant to buy it because of its high price, but now that I have saved up my points, I bought it.
The quality of the product is good and satisfactory because it is from Japan.
Assembly was easy and we are looking forward to maintenance.
View detail
Recommendation for those who live in a car or in a housing complex!
When it comes to Motorcycle MaintenanceSTAND, J-TRIP! Anyway, the quality is good and it won't break!
I'm sure you're all wondering. Long." Or "Short" Which one to buy!
I think it is. In conclusion, if storage Space and use Space allow Long." You have one choice!
Long size is much easier to STAND than short size.
So, is a short size like this product bad? Not really.
Bicycle parking space in housing complexes, where maintenance is required in a small space, or
I think Short is also the best choice for transporting in a transporteretc.
Anyway, the quality of J-TRIP is the best, so it's a RECOMMENDATION!
View detail
Designated items sold separately.
As per Title, it was a Manufacturer specified product of the RearMini stand prepared for the Z125PRO, and when I checked it when I purchased it, I always have the impression that it has a solid and sturdy finish.
Package. It's not slippery." It was! It is true that it is not slippery, but there was a case that it slipped a little in the initial stage of purchase due to the oil content from the compatibility with the paint of Z's Swing Arm or from the side work.
The resin of the L-receiving part, which is often a problem in overseas products, is welded with a thick urethane-like material, and there seems to be no problem with durability or aggressiveness to the Swing Armetc.
The rotation of the L-supporting part is also light, and when lifting the swing arm, simply place it horizontally on the car body and it will be attached to the swing arm. The stability of the Swing Arm is more than just the swing arm on the L-support, and the work can be done with a sense of stability and security.
As mentioned in Manufacturer's comment, we need to pay attention to the slippage caused by oil in the lower part of the Swing Arm, and now we always clean and wipe it off thoroughly before using it.
View detail
Fits: HONDA glom, HONDA MONKEY125, KAWASAKI Z125, HONDA APE100, HONDA APE50, HONDA XR100, HONDA XR50, HONDA NSF100, HONDA NSR80, HONDA NSR50, HONDA GORILLA50, HONDA MONKEY, HONDA MONKEY
Compact size makes it versatile, and its stability is different.
I bought this for my Z. It is still useful for maintenance in many ways.
Since it is also used for in-vehicle use, this Type is Space-like in its ease of use and convenient for fixing.
Although the Type from the past makes me nostalgic, the welding and finishing of each part is a quintessential Zukuri no Mori product, and the usability and stability are outstanding.
Since it is used for Z125PRO, this time we chose this type which does not have 4MINI exclusive roller.
I am currently using it with the L-shaped receptacle, but I wonder if the V-shaped receptacle would be safer for in-vehicle use, and the L-shaped receptacle also seems to have a good, sturdy construction.
The 12-inches is also the application range for the installed state, so it will be easy to take the Rear wheel on and off.
This is simpler and longer-lasting than the conventional resin joint type, and it is also easier to procure with less risk of breakage.
The resin bolt is just the right size for a large bolt and is easy to use, and it's strong and good, but when used frequently or for a long period of time, or when used on a large type car, it tends to be tightly torqued, and I have had trouble with it breaking at some track days. I have a feeling that a large butterfly screw would be good for big motorcycles.
Although there are many manufacturers selling for-Japan models, considering durability, stability, safety, etc., I think that a manufacturer with a proven track record and commitment to quality will be the best choice.
If you are used to using a roller, you may feel some discomfort when first attaching and detaching this type, but the force is easy to adjust, and you will soon get used to it.
The price is a little higher, but you can tell the difference in construction, stability, and durability as you use it more often and for longer periods of time.
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Anodized or DURACON?
I bought DURACON because using Anodized Hooks inevitably results in Anodized peeling and scratching after use.
I purchased the black color and the scratches from use are not noticeable, but the black color is turning white due to sunburn.
In this respect, the White color may not be noticeable.
It is simple, so it does not have the same dress-up effect as the Anodized version, but I like the simplicity of the smallest necessary limit.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ZX10R, KAWASAKI ZX6R, KAWASAKI NINJA400, BMW S1000R, BMW S1000RR, DUCATI 749, DUCATI Late 999, HONDA , KAWASAKI ninja, KAWASAKI Ninja 1000SX, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), SUZUKI , TRIUMPH DAYTONA675
For Transporter loading
The GSX150BANDIT has a Center Stand, so maintenance is easy, but when loading the Transporter, it is better to use the Racing Stand and Wheel Clamp to hold the motorcycle in place so that the Tie Down does not have to be closed so tightly. However, when loading the Transporter, it is better to use the Racing Stand and WheelClamp together to hold the motorcycle in place, so there is less wobbling. View detail
JAPAN is reliable and safe! J-TRIP's STAND is the best!
I had been using J-TRIP's Short Stand, but I wanted more usability, so I bought a Long Stand! The Long Stand takes up more storage space, but it is easier to STAND! I am much less worried about tipping over my motorcycle than I was with the Short Stand! If storage space permits, I highly recommend the Long! View detail
Tire warmer accompaniment
TitleOnly I bought it just to float the front wheel and wrap the Tire warmer around it.
I purchased this product because I have started to use a light van as a Transporter in my family Listra and it is tough to get the Front stand into the cargo area.
As expected from J-Trip, there is no problem with the quality.
View detail
Use L4 for medium-sized vehicles.
The L4 can be used on a Large for Vehicle, but it sticks out a little more than the width of the Swing Arm, so I had to use it without interfering with the LimitSprocket. It was safer to purchase L4 for medium size vehicles. View detail
Either is required
Either L- or V-shaped receptacles are required View detail
Maintenance essentials
It is a necessity for Maintenance.
Since it is parallel to the ground, it can be used for oil change, chain cleaning, wheel cleaning, tank removal, etc.
Also, Motorcycle looks good with STAND installed.
View detail