Reviews
I am using it for XR BAJA. It is not XR50 / object for 100 motards as others are also written, and it is a general-purpose article which can be used also for a full-sized off vehicle. Although it wavered with the stand of DRC, since the talk that
I am using it for XR BAJA.
It is not XR50 / object for 100 motards as others are also written, and it is a general-purpose article which can be used also for a full-sized off vehicle.
Although it wavered with the stand of DRC, since the talk that the four-point support by Bar was stabilized from monotonous support was heard well, the stand of J-TRIP was decided on.
It can take up and down without suffering troubles at all.
There is almost nothing also with Grad in the favor of four-point support, and it is very convenient.
However, although it is a case of XR BAJA, a front wheel remains grounding lightly, when it did not take care about the location.
If the back goes up somewhat highly, I will think that it is good.
Although it is not caring since it will be solving immediately if some are well wound around Bar ...
View detail
A rear axle is made to carry out shaft penetration, and a motorcycle and a stand can maintain the state where it always stuck. So, since a ground surface can certainly be contacted by three points of two rollers, a rear tire and a stand, when making v
A rear axle is made to carry out shaft penetration, and a motorcycle and a stand can maintain the state where it always stuck.
So, since a ground surface can certainly be contacted by three points of two rollers, a rear tire and a stand, when making vertical the motorcycle in front of lift up, a tail cowl can be held with both hands and there is sense of stability very.
Moreover, lift up is also light and it can simplify it on one leg.
Since the lift of the motorcycle can be carried out safely anyhow, in beginners, it is recommendation absolutely!
View detail
Fits: YAMAHA , DUCATI MONSTER S2821, TRIUMPH DAYTONA675, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA SL750, APRILIA RS125, APRILIA RS250, YAMAHA , TRIUMPH Daytona 675, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750, DUCATI Panigale 899, DUCATI Monster 821, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750
Silver is chosen so that it may not become the same as a body color, and it may be conspicuous. Since appearance is visible to a race ish (>=竏?=), it is b.
Silver is chosen so that it may not become the same as a body color, and it may be conspicuous.
Since appearance is visible to a race ish (>=竏?=), it is b.
View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Since it had a roller stand of J-TRIP, he wanted to attach and use this hook bolt, and it was purchased. The color of my motorcycle chose red for the red system. The place with this sufficient product is the form which only a J-TRIP original manuf
Since it had a roller stand of J-TRIP, he wanted to attach and use this hook bolt, and it was purchased.
The color of my motorcycle chose red for the red system.
The place with this sufficient product is the form which only a J-TRIP original manufacturer's product has and is easy to apply to V hook receptacle by the side of a stand.
Furthermore, it can be satisfied also with a lightweight thing and the beautiful quality of an anodized.
If it purchases according to the color of its own motorcycle, it will also become a one point of KASUTAMU.
Since it is good goods, it is a recommend also at you.
View detail
Since the center stand of normal was removed, the stand was purchased for the first time in in motorcycle life. Although it is used for GSF1200, a lift can be carried out simply and it is convenient.
Since the center stand of normal was removed, the stand was purchased for the first time in in motorcycle life.
Although it is used for GSF1200, a lift can be carried out simply and it is convenient.
View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Since the rear maintenance stands of J-TRIP were purchased, the original manufacturer's product thought that it was good, and purchased. Since the attached bolt was SS (iron), it exchanged and equipped SUS (stainless). Although it is in play, trul
Since the rear maintenance stands of J-TRIP were purchased, the original manufacturer's product thought that it was good, and purchased.
Since the attached bolt was SS (iron), it exchanged and equipped SUS (stainless).
Although it is in play, truly, it is pure, is peevish and comes by a lift easily.
Parts of this sort are restricted to an original manufacturer's product.
View detail
If height is made into the maximum, you use also for an off vehicle rear [ 18 inches of ]. It is good exactly in the middle of the inside which exists three steps by an ordinary on vehicle rear [ 17 inches of ]. Although it similarly had off-road
If height is made into the maximum, you use also for an off vehicle rear [ 18 inches of ].
It is good exactly in the middle of the inside which exists three steps by an ordinary on vehicle rear [ 17 inches of ].
Although it similarly had off-road stands of J trip, at the time of mission oil exchange, the level of the car body could not be taken out and troubles were suffered.
Then, since the level will appear in a good condition if it supports by this roller stand, it is easy.
I was slightly glad although it was not a reason for having thought that he would use for an off vehicle and having bought it.
I think that it can be universally used if it is L receptacle, and it is a vehicle type with an ordinary swing arm.
Although off-road stands are also under a motorcycle with a photograph, it is in the state from which it has separated.
View detail
It is five * without a complaint. Although it was as uneasy as ? in whether it goes up really simply, power was hardly needed, either but was improved simply. There is also no fear of the rubber band which fixes a front brake being attached, and r
It is five * without a complaint.
Although it was as uneasy as ? in whether it goes up really simply, power was hardly needed, either but was improved simply.
There is also no fear of the rubber band which fixes a front brake being attached, and running in front.
Since it is a wheel penetration type, it cannot be used for a tire change, but since it is stabilized that much, chain cleaning etc. can maintain comfortably every day.
Moreover, it can respond to a tire change etc. by changing the receptacle of a stand by optional parts.
View detail
Fits: DUCATI MULTISTRADA 1000DS 1000, DUCATI STREETFIGHTER848, DUCATI MONSTER796, DUCATI Multistrada 1100/S, DUCATI MONSTER1100EVO, DUCATI HYPERSTRADA, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD796, DUCATI 996, DUCATI 998, DUCATI 848, DUCATI 916, DUCATI 748, DUCATI 748, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI HYPERMOTARD796, DUCATI HYPERSTRADA
Perfect to S2R1000! With [ it plays and ] none of most wobbles!
Perfect to S2R1000! With [ it plays and ] none of most wobbles! View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
Since only this place and kawasaki vehicles are changed, it is the replacement from Saki's motorcycle. Although sold at a comparable price also with the kawasaki pure option, since it sold at the store at which it dropped in by chance, it purchased.
Since only this place and kawasaki vehicles are changed, it is the replacement from Saki's motorcycle.
Although sold at a comparable price also with the kawasaki pure option, since it sold at the store at which it dropped in by chance, it purchased.
Since it is hard to separate when hooking a stand, since it is larger than the hook of a pure option, it can raise in comfort.
Because a great eye will be seen if it separates since ZRX1200R is a heavy weight vehicle --
The surface has rusted as the bolt body is making uniqlo plating steel, but since it is standard practice with a thinner pitch of this hexagon head bolt, the 10-mm bolt currently sold in the home center cannot be used.
It is quite disgraceful by favor.
Since replacement parts may be sufficient, I am just going to want you to sell.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
Only the hook bolt was purchased to the Tameichi tip of a foot of the J-TRIP motorcycle stand which is due to be purchased someday. Since there was the same blue as a car body, a motorcycle and a sense of togetherness come out and it is a favorite ver
Only the hook bolt was purchased to the Tameichi tip of a foot of the J-TRIP motorcycle stand which is due to be purchased someday.
Since there was the same blue as a car body, a motorcycle and a sense of togetherness come out and it is a favorite very.
笙ェ which the slider role of an in [ an emergency ] also has and it has satisfied very much also as a joke one point although it is not necessarily so much conspicuous
View detail
It is most important that it can use even place [ narrow ]. It is large activity also at an inner dirty and narrow garage. (It is quite obvious if I have a picture seen) If it gets used, use by itself can also be performed in comfort.
It is most important that it can use even place [ narrow ].
It is large activity also at an inner dirty and narrow garage.
(It is quite obvious if I have a picture seen) If it gets used, use by itself can also be performed in comfort.
View detail
Since the motorcycle which has equipped only side stands was changed, it purchased to maintenance. Since it is short, it is [ that it is likely to be hard to mention ] visible, but except for ZRX1200R which has ridden now, it goes up lightly. Howe
Since the motorcycle which has equipped only side stands was changed, it purchased to maintenance.
Since it is short, it is [ that it is likely to be hard to mention ] visible, but except for ZRX1200R which has ridden now, it goes up lightly.
However, since ZRX is in the place where a hook bolt is lower than other motorcycles for the swing arm of trussed structure, it needs remarkable power for raising.
The long type may be better.
He cannot understand this spread, although it wavered with the usual white version.
Because it does not change that the bearing is not necessarily both contained and a total of four rollers sticks although the roller part is large-sized to be sure, either --
View detail
Since the rear shaft was using it for Ducati in the air until now, the shaft type was used, but since it needed to be used for a wife's motorcycle, L receptacle was purchased. Although it was trustworthy that the shaft type of the possibility of an ac
Since the rear shaft was using it for Ducati in the air until now, the shaft type was used, but since it needed to be used for a wife's motorcycle, L receptacle was purchased.
Although it was trustworthy that the shaft type of the possibility of an accident is lower, the raw material on which it is hard to slide is used, and it was able to use, without becoming so nervous.
That L receptacle rotates also has the expensive point.
It is a recommend also in the unfamiliar one.
View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
maintenance of the circumference of rear one -- it considered and considered the purchase of the stand. As a result of examining many things, the thing of J trip was decided on. When HP of J trip was seen, lift up is carried out lightly simply and
maintenance of the circumference of rear one -- it considered and considered the purchase of the stand.
As a result of examining many things, the thing of J trip was decided on.
When HP of J trip was seen, lift up is carried out lightly simply and it became a conclusive factor.
If variety entertainments are chosen, an aluminum hook bolt is also likely to become a one point and seems to be simple also for lift up.
Although lift up has not been carried out by itself yet in this stage ... In order to carry out lift up using Colet, a stand main part, V hook carrier, and this hook bolt are needed.
The thing which is a set depending on the contents of a set also has a stand main part and V hook carrier.
Since he chose black long roller stands, he has forgotten to buy ... and V hook carrier for arranging all with a rose... (jomegaj) Wayne -- it is an order again.
View detail
A correspondence vehicle type is HONDA. : XR50 motard : Although it is XR100 motard, Mr. Webike is unknown in why such an indication is given. Other vehicle types can also be used satisfactorily and it has become a general-purpose article even in the
A correspondence vehicle type is HONDA. : XR50 motard : Although it is XR100 motard, Mr. Webike is unknown in why such an indication is given.
Other vehicle types can also be used satisfactorily and it has become a general-purpose article even in the maker site.
Since the minimum quantity and a lift amount can adjust with one screw in three steps, it can be satisfactorily used to a full size-off vehicle~motocrosser as well as a motard.
Since it is the simple structure which occurs only by applying weight by the principle of a lever at one shot, it is considerably durable.
Since the support rack is monotonous, the same stand of the other company does not have the quite satisfactory constancy of a motorcycle, but since this is four-point support, it is preeminent also for stability! Since a price is also cheap, it is super-recommendation.
View detail
Although the standard receptacle was used for some time, if L receptacle set purchase is carried out lately and it is used, the L receptacle here is clearly easier-to-use. It is a recommend here and there [ first ]. The vehicle type incidentally u
Although the standard receptacle was used for some time, if L receptacle set purchase is carried out lately and it is used, the L receptacle here is clearly easier-to-use.
It is a recommend here and there [ first ].
The vehicle type incidentally used mainly is a zephyr.
View detail
When bothering him about everything too and giving it a try, it was easy to do as itself a direction with ~ (in volume retailer, since there was also store which is carrying out option of receptacle, he bought it with Coco and there was no time-and-effort
When bothering him about everything too and giving it a try, it was easy to do as itself a direction with ~ (in volume retailer, since there was also store which is carrying out option of receptacle, he bought it with Coco and there was no time-and-effort difference) roller that [ whose ] of V receptacle was easy! View detail
Anyhow easy as the name suggests. Before buying this, it tried to use an ordinary maintenance stand, the motorcycle was toppled, and alone the unreasonableness ! was thought, but the girl was seen have applied the hayabusa very simply by the picture o
Anyhow easy as the name suggests.
Before buying this, it tried to use an ordinary maintenance stand, the motorcycle was toppled, and alone the unreasonableness ! was thought, but the girl was seen have applied the hayabusa very simply by the picture of HP, and it opted for purchase.
When actually used, it was able to use really easily.
Since it is used through a stick into an axle, it is a difficulty that desorption of a rear tire cannot be performed, but mind that a hang is likely to be memorized before long and it does also in an ordinary way if it applies now several times is used.
In beginners, it is a super-recommend.
It has the expensive point the parts made into an ordinary maintenance stand and that it is also an option.
View detail
Fits: DUCATI MULTISTRADA 1000DS 1000, DUCATI STREETFIGHTER848, DUCATI MONSTER796, DUCATI Multistrada 1100/S, DUCATI MONSTER1100EVO, DUCATI HYPERSTRADA, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD796, DUCATI 996, DUCATI 998, DUCATI 848, DUCATI 916, DUCATI 748, DUCATI 748, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI HYPERMOTARD796, DUCATI HYPERSTRADA
It purchased to Ducati 1098. It purchased simultaneously with a stand main part. I think that attachment was also easy and did not take 1 minute. However, it is a difficulty that a shaft is still a large sum (10,290 yen)! That's right since it
It purchased to Ducati 1098.
It purchased simultaneously with a stand main part.
I think that attachment was also easy and did not take 1 minute.
However, it is a difficulty that a shaft is still a large sum (10,290 yen)! That's right since it cannot decide on a mass production method when it asks a manufacturer.
It is a wish, so become the same price as a shaft besides early!
View detail