Reviews
Required by Maintenance/Circuit.
If you do your own maintenance, you will need to do it,
I think the longer one can hang STAND with lighter force.
The construction is solid and secure.
I think it will last a long time. It's a little expensive, but...
View detail
J-TRIP J-Trip JTrip Short low Ra Rear Tan
We used to use a certain A0-tro product, but its strength was not good enough, so we were considering J-TRIP, although it is more expensive.
After purchasing the product, I am very satisfied with the stability and the ease of raising and lowering the product on a Large Motorcycle.
View detail
Convenient
I bought it for Chain refueling and washing for Vehicle. View detail
I am satisfied
The packaging material has a Cigarette smell as others have mentioned? If JAPAN is a feature of this product, I would like to use it.
The body is solid and even a beginner can handle the assembly. I wrapped it with rubber mat to protect the installation area. I haven't put my motorcycle on it yet, but it fits EXACTLY in a tentative fit. The height is the lowest position in the 3 levels of holes, and the width is the widest position, which is almost the width of the largeest hole. There is still room to spare.
View detail
Short low ler takes up little space.
The lightness and ease of handling are impeccable. I am satisfied.
I use it on my Racer, but it is also useful when I carry it on the Transporter because I can hang it on my STAND.
View detail
It's safe to say that it won't come off.
As the name suggests, we believe that first-timers can STAND on it.
The biggest problem with stand hanging is that the stand may slam when hanging or removing the stand.
The Axle Shaft is hollow, but this product does not have that flap, so you can concentrate only on not knocking over the Motorcycle, which makes the Large change easier on your mind.
I initially tried to use a rear stand from another China product on my 212 kg motorcycle, but it wouldn't lift up at all, so I bought this product.
However, since the Chain Tension adjustment does not allow Axle Shaft Access, I think you will need a Bracket for the L shape or Hook so far.
The quality of this product is very good because there is less shock when lifting up and taking off. I think the quality is very good.
View detail
I like the CHIC Black!
Familiar with Maintenance Stand JTrip." The Short lowler Rear Stand of the
I used to use Long Type, but I wanted a compact Short Type, so I replaced it.
such as the V-supply. "Taken." I chose this product, which does not come with a receptacle, because I already have a I was also happy to see that this product comes in a choice of Black.
After opening the package, the Roller part needs to be assembled (easy).
It's hard to explain, but I liked the texture of the Roller. It's easy to use and seems to have a luxurious feel.
Naturally, it required more force to Lift up compared to the Long Type.
I liked that it rose to a good height with the lowest height adjustment.
If you have a large work Space or storage area, you may want to use the Long Type.
View detail
J-TRIP Short roller stands
I used it to replace the Exhaust System on my Z900rs, and in combination with the V-shaped Hook, I was able to stand it up by myself without any problem. The price is not cheap, but it was a good decision to buy a new one from Webig because you can't find used ones on Yahoo Auctions or Mercari, and even if they are listed, they are full of rust and the price is high for that. View detail
During maintenance such as Wheel, ChainMaintenance, etc.
I purchased Maintenance Stand for the first time and used it for the first time.
To be honest, it was my first time. Will it lift properly?" And "Why don't we take down Motorcycle?" I was worried about a lot of things, but it was surprisingly easy to Quantity:Set is ready.
It may depend on the person, but you can put something thicker on the Side Stand from the beginning to keep the Motorcycle straight and Quantity.:I think it would be easier to Set.
I am concerned that the Gold price is too high and that the Hook will be damaged because it directly interferes with the Hook, which is unavoidable.
View detail
Additional purchases
I purchased the Hook originally for maintenance etc., so I purchased only the Body.
I am satisfied with it because it will be useful for Large change if it is available.
View detail
A must for maintenance
First of all, note that Body alone cannot be used, but requires the receiving Bracket.
Also, some receiving brackets may not be used for certain types of vehicles, so make sure you buy the right shape for your motorcycle.
The Rear Stand is essential for various maintenance around the Rear area from Chain cleaning, and it is also necessary to keep the Rear Stand upright for work using the Front Stand.
NarrowSTAND would have been better for 250ccClass because the Tire is not thick enough.
I used to have NarrowSTAND, but it is slightly more compact in size.
There are no complaints or dissatisfaction with the quality and usability of the product, which is the quintessential J-TRIP.
Gold amount is slightly higher than others, but I have never heard of J-TRIP's STAND breaking, so I think it is possible to buy it for a lifetime.
View detail
I'm concerned about rattling in the adjustment area.
Although it is a Short Type, it could lift about 220 kg without any effort.
I think Large people will choose Bobbin type, but VPlate is more stable and easier.
I wonder if they dare to do so to make it easier to match, or if the rattling of the adjusting section is Largekiku rattling.
If you bite a piece of wood on the Side Stand to keep it almost upright, and then stand on the Right Side and hang it with your foot, it will not rub off.
Once purchased, it will be semi-permanent. It will expand the scope of maintenance, so if you are not sure about it, buy it.
View detail
I finally bought it.
I finally bought it.
I had been hesitant to buy it because of its high price, but now that I have saved up my points, I bought it.
The quality of the product is good and satisfactory because it is from Japan.
Assembly was easy and we are looking forward to maintenance.
View detail
Recommendation for those who live in a car or in a housing complex!
When it comes to Motorcycle MaintenanceSTAND, J-TRIP! Anyway, the quality is good and it won't break!
I'm sure you're all wondering. Long." Or "Short" Which one to buy!
I think it is. In conclusion, if storage Space and use Space allow Long." You have one choice!
Long size is much easier to STAND than short size.
So, is a short size like this product bad? Not really.
Bicycle parking space in housing complexes, where maintenance is required in a small space, or
I think Short is also the best choice for transporting in a transporteretc.
Anyway, the quality of J-TRIP is the best, so it's a RECOMMENDATION!
View detail
Fits: HONDA glom, HONDA MONKEY125, KAWASAKI Z125, HONDA APE100, HONDA APE50, HONDA XR100, HONDA XR50, HONDA NSF100, HONDA NSR80, HONDA NSR50, HONDA GORILLA50, HONDA MONKEY, HONDA MONKEY
Compact size makes it versatile, and its stability is different.
I bought this for my Z. It is still useful for maintenance in many ways.
Since it is also used for in-vehicle use, this Type is Space-like in its ease of use and convenient for fixing.
Although the Type from the past makes me nostalgic, the welding and finishing of each part is a quintessential Zukuri no Mori product, and the usability and stability are outstanding.
Since it is used for Z125PRO, this time we chose this type which does not have 4MINI exclusive roller.
I am currently using it with the L-shaped receptacle, but I wonder if the V-shaped receptacle would be safer for in-vehicle use, and the L-shaped receptacle also seems to have a good, sturdy construction.
The 12-inches is also the application range for the installed state, so it will be easy to take the Rear wheel on and off.
This is simpler and longer-lasting than the conventional resin joint type, and it is also easier to procure with less risk of breakage.
The resin bolt is just the right size for a large bolt and is easy to use, and it's strong and good, but when used frequently or for a long period of time, or when used on a large type car, it tends to be tightly torqued, and I have had trouble with it breaking at some track days. I have a feeling that a large butterfly screw would be good for big motorcycles.
Although there are many manufacturers selling for-Japan models, considering durability, stability, safety, etc., I think that a manufacturer with a proven track record and commitment to quality will be the best choice.
If you are used to using a roller, you may feel some discomfort when first attaching and detaching this type, but the force is easy to adjust, and you will soon get used to it.
The price is a little higher, but you can tell the difference in construction, stability, and durability as you use it more often and for longer periods of time.
View detail
STAND up for courage.
Used with JT104H. Instruction ManualThe machine stands upright without any difficulty, even though it is structurally impossible to collapse. View detail
Motorcycle Maintenance
Motorcycle STAND must be jtrip. It is indispensable for my work. I am very satisfied. The price is a little high. View detail
Maintenance Stand
This is the first time I have used the Maintenance Stand and it seems to be useful for cleaning the Chain. It is also good for storage. View detail
I purchased this for RearMaintenance on my 92 Grom.
I chose this one, which was more expensive but seemed to be well made, along with the one-size-fits-all L-Type Hook is sold separately. The product we actually received was just as it should be.
The wheels are also 10 cm in diameter, so they seem easy to use.
As for the feel of the product, I think it can be safely STAND-UP with two people, but it can also be done by one person. But it can be done by one person.
The "C" in the bracket part of the hook is a little tight, so it could not be used in the arm of the gromm, but it is a good level.
There are three height adjustments, and the lowest height was sufficient for the groms.
I think it will be useful to have it when I replace it with OthersDress-up products. I also felt that it would make the process a little easier and more accurate.
I think it is a good Tool to have.
View detail
While moving, it gets disgusted for carrying out an oil difference, and purchases. It was able to raise to use and serious comfort in CB400SF REVO. Since paint application of the portion in contact with a ground surface was likely to come off, he
While moving, it gets disgusted for carrying out an oil difference, and purchases.
It was able to raise to use and serious comfort in CB400SF REVO.
Since paint application of the portion in contact with a ground surface was likely to come off, he bought a thin rubber and it stuck it in the home center.
Since the 5-mm hezagonal wrench for attaching a wheel was not attached, it is *-1.
View detail