Reviews
JTrip Stand for Beginner
At first I was worried about being able to stand the STAND without tipping the Motorcycle over, but it was easier than I thought it would be. I wish I had purchased this product earlier. View detail
Definite shopping
Stable J-TRIP.
Used in conjunction with V receiver 1.
Impeccable.
View detail
J-TRIP Short roller stands
I used it to replace the Exhaust System on my Z900rs, and in combination with the V-shaped Hook, I was able to stand it up by myself without any problem. The price is not cheap, but it was a good decision to buy a new one from Webig because you can't find used ones on Yahoo Auctions or Mercari, and even if they are listed, they are full of rust and the price is high for that. View detail
When in doubt.
I was looking at APRO and DTONA products, but the quality was not good enough.... So, I decided to buy one from JAPAN because of its high price but reliability. My car did not have a hook bolt, so I bought one separately. Installation was easy.
When I tried to use it, the Mud Guard was in the way and I thought I had made a mistake in purchasing it. I thought about it carefully and realized that I had to remove the Mud Guard, and then I attached the V-receptacle I had purchased separately to the body and lifted the Rear Tire.
View detail
Heavy objects are easily lifted
There are many products out there, but I chose J-TRIP. It is already easy. However, L-Shaped Receptor and Small Motorcycle seem to be incompatible, so I purchased a V-shaped Receptor separately and am now using it. View detail
J-TRIPShort low ler Rear stand
I purchased this for my MT-09.
We considered cheaper companies A and D, but after reading your review, we decided to purchase JT-RIP.
Because there is no room in the length of Garage, we decided to use Short. It is also stable enough.
It helps with maintenance, but if it were cheaper, I would have no complaints.
View detail
It goes up impressively light.
I bought this STAND for Chain maintenance since gsx-s1000gt is not equipped with Center Stand. I had expected it to be able to lift up lightly from previous reviews and YouTube. When I actually tried it, I was impressed by the lightness that far exceeded my expectations. It may be an exaggeration, but it's almost like putting up a Mothers' bicycle STAND. j-trip is amazing.
At first, I was thinking of getting a V-accessory, but the staff at the motorcycle shop advised me that Stand for Beginner was the best recommendation if I was going to do it alone, so I bought it. As a result, I was right. I can lift up and down easily by myself without any worries. I can lift it up and down easily by myself without any worries.
View detail
Very easy.
I watched the official YouTubeChannel to prep it and it was very easy to use. Car wash and Chain Shiko are very easy. It is so easy to use that I wonder what I had to do with the Roller stand until now. If you wash and maintain your car frequently, this is a must-have item. Additional purchases are a V-receiver, a thing to keep the front brake lever pulled, and a bush to attach it to the car body. I purchased the "Helpful Rubber" as an insurance policy, but it has not been opened yet and has not been used. View detail
During maintenance such as Wheel, ChainMaintenance, etc.
I purchased Maintenance Stand for the first time and used it for the first time.
To be honest, it was my first time. Will it lift properly?" And "Why don't we take down Motorcycle?" I was worried about a lot of things, but it was surprisingly easy to Quantity:Set is ready.
It may depend on the person, but you can put something thicker on the Side Stand from the beginning to keep the Motorcycle straight and Quantity.:I think it would be easier to Set.
I am concerned that the Gold price is too high and that the Hook will be damaged because it directly interferes with the Hook, which is unavoidable.
View detail
Additional purchases
I purchased the Hook originally for maintenance etc., so I purchased only the Body.
I am satisfied with it because it will be useful for Large change if it is available.
View detail
Slightly disappointed.
[How is it used?
Used in YZF-R6 (2019) with V-receiver.
I am new to buying Rear stand but have rented a Short from J-TRIP.
Was the one you received as per Image?
It was heavier than I expected, but not a problem at all.
The large size was as shown in the image, but it is still large compared to the short size.
How was your experience with it?
It is easy to raise and lower, and although I was worried about the short version, I made the right choice by choosing the long version.
However, even with Short, Stand for Beginner was easy and did not require much strength.
The screw holes are too large or the bracket is wobbly even when the bolt is tightened firmly.
[Points to note]
In the case of the V receiver, even at the lowest setting, it floats about 4 cm, so a little force is required to raise it.
If you want to raise it with light force, it is better to choose Stand for Beginner because Stand for Beginner will be in a lower position.
View detail
Basic form of Garage maintenance
Quantities that are the very basics of home maintenance:Set would be this one.
Until now, I had been using a maintenance stand from another company, a type with a short handle, but it had become quite damaged, so I decided to buy another STAND made by JTrip.
First of all, it is not suitable for loading on a Transporter because of its long handle. (Probably the Tailgate will not be able to be closed.)
However, if it is to be used in a Garage with a maintenance Space, the handle should be long enough.
It is very easy to lift up with very light force.
I wonder if Small students can do Lift with the help of Small students.
It goes up that lightly, so those who are not confident in their arm strength should not worry.
The Roller also turns lightly, and the Roller is very stiff, yet Material:Since it is Rubber, Material:The feel is better than other companies' products using Plastic's Roller.
It is also quiet and luxurious.
And the reason why it has been highly supported by users for many years is because it has been designed with motorcycles in mind.
Although simple and straightforward in construction, it is possible to bring the receiver to an excellent position, resulting in a great user experience.
TDM900 is a normal Rear 17in. but with the height adjustment at the bottom of the Quantity:When set, the amount of Tire Lift is only about 2 cm.
The tire replacement is easy to do because it has hardly been raised, and above all, it is very light to apply STAND!
If you have a place to put it, I would definitely recommend it, and I don't think there is any point in buying a Type with a short handle if you are stingy with the little space you have.
For the main driver of the Circuit who wants to use it when loading a transporter, a shorter circuit would be better, but how many of you do that?
Normal people are definitely Koch.
Besides, I don't need STAND when loading the Transporter.
View detail
J-TRIPSTAND
I purchased this product for ZX-25R maintenance.
I was confused between Short and Long Type,
I am happy with Long Type.
With Long, it is quite easy to lift with little effort.
Recommended
View detail
I'm glad I bought it
Spec. applications are mainly Oil replacement and Chain cleaning.
Since my motorcycle is a ninja1000, I decided to use an L-shaped catch because I heard that a V-shaped catch will scratch it, as per other reviews.
This was my first Maintenance Stand, and I was able to do the initial raising operation with no worries at all (although caution is required).
In my case, in addition, I place a board or a brick under the STAND, keep the Motorcycle as vertical as possible, and press the Maintenance STAND firmly against the Swing Arm with my hand. Then, the MaintenanceSTAND is placed firmly against the Swing Arm and pushed by hand.
It goes up easily with a simple "goo". When lowering, it can be lowered slowly with the same momentum.
It may be a good idea to lay down a tan balletc. since the area in contact with the ground is prone to scratches.
View detail
A must for maintenance
First of all, note that Body alone cannot be used, but requires the receiving Bracket.
Also, some receiving brackets may not be used for certain types of vehicles, so make sure you buy the right shape for your motorcycle.
The Rear Stand is essential for various maintenance around the Rear area from Chain cleaning, and it is also necessary to keep the Rear Stand upright for work using the Front Stand.
NarrowSTAND would have been better for 250ccClass because the Tire is not thick enough.
I used to have NarrowSTAND, but it is slightly more compact in size.
There are no complaints or dissatisfaction with the quality and usability of the product, which is the quintessential J-TRIP.
Gold amount is slightly higher than others, but I have never heard of J-TRIP's STAND breaking, so I think it is possible to buy it for a lifetime.
View detail
J-TRIP for peace of mind
I have been using J-TRIP STAND for more than 20 years and this is the third one I have used. I bought a new GSX-S750, so I decided to go out on a limb and buy the Plating type. I bought the plating type because my 20 years old model has some rust on it.
If you feel uneasy when using the Rear Racing Stand, you can safely STAND-UP the Rear by using the Wheel chock for Front.
For the front wheel chock, the GSX-S750 uses a made in USA product (BAXLEY TRAILER. There is no problem to stand it upright with Astro, but it is dangerous to use it with a single body, so please use it with the Racing Stand for Rear.
View detail
ChainMaintenance seems to be progressing.
I had been using DAYTONA's Easy Lift Up Stand for chain maintenance, but I found it difficult to maintain the chain because it is inclined toward the chain side and there is an exhaust system, so I purchased the Rear Stand.
I was torn between Short and Long, but chose Long because STAND beginners prefer Long.
In fact, I have used STAND, and it can be used by one person, and the chain position is slightly higher and more vertical, so I think I will be able to make progress with my chain chicos.
The way to hang the stand is on youtube.com, but by fixing the front brake and cutting the handlebar as far to the left as possible, and inserting a piece of wood about 4cm thick under the side stand, the motorcycle will be close to vertical, and the stand can be hung by a single person.
To remove the STAND, make sure the SIDE STAND is out, clear away the wood, and remove the STAND from the RIGHT rear of the Motorcycle while supporting the Motorcycle with one hand.
When applying STAND, I think there is no difference between Short and Long, but when removing STAND, Long is easier to hold and lighter to remove, so if storage space and space permit, I would recommend Long.
View detail
I'm concerned about rattling in the adjustment area.
Although it is a Short Type, it could lift about 220 kg without any effort.
I think Large people will choose Bobbin type, but VPlate is more stable and easier.
I wonder if they dare to do so to make it easier to match, or if the rattling of the adjusting section is Largekiku rattling.
If you bite a piece of wood on the Side Stand to keep it almost upright, and then stand on the Right Side and hang it with your foot, it will not rub off.
Once purchased, it will be semi-permanent. It will expand the scope of maintenance, so if you are not sure about it, buy it.
View detail
To improve maintenance efficiency
I purchased this manufacturer's product to improve the efficiency of maintenance of the Large model. The best thing about it is that the word-of-mouth is good, the feeling of using it is good, the feeling of putting a motorcycle on it is quite nice, and above all, the adjustment of the chain and rear suspension is easy to clean, so I am glad I bought it. View detail
Fits: Others , DUCATI SPORT1000, DUCATI PAUL SMART1000LE, YAMAHA V-MAX 1680
Easy Lift up
Lift up can be done lightly.
It is easy to use the special receptacle, but until you get used to it, it is a bit nerve-wracking. In fact, I almost knocked it over several times.
There are videos on YouTube on how to use it, so I think you should watch them before you do it.
If you have a Jack or similar, you can safely apply the STAND after the vehicle is vertical.
I think it is good to have it for washing the car, cleaning the chain, and removing and installing wheels.
View detail