Reviews
Used for Tire warmer
I use it on my Ninja 250SL that I ride for Circuit Racing.
This is a product with excellent cost performance
View detail
Garage is Race ish and feeling great!
It is useful for maintenance of the Motorcycle in an upright position. It makes it easier to clean the wheel along with maintenance. View detail
Share No. 1 is no joke.
Certainly, it is more expensive than Chinese STAND sold by other overseas Manufacturers or on Amazon. I had been using other manufacturer's STAND because I could not afford it, but after using it this time, I found out that there is a reason for the price.
The lightness, ease of lifting, and ease of handling all exceeded the STAND I have used in the past.
I thought that the quintessential "FOR JAPAN MODELShare No. 1" was not a date.
View detail
It's jBird with peace of mind.
The Large body can be used for vehicles with a hole in the bottom of the Bottom case.
It is highly universal, so it is convenient to have one.
View detail
Easy Front up
I used it on my YZF-R1. It takes more force to raise it than I expected.
The tip of the clip seems to be a little shallow and I was worried that it might come off, but it seems to be large and sturdy.
The structure is such that the Gold genus directly hits the lower edge of the Fork, so those who are concerned about the Wound need to take measures to prevent it.
View detail
Front stand
It's a win-win situation, but ….
Pros.
Adjustable, so it can be used for any type of car.
Cons.
Requires adjustment depending on the vehicle model, so it is a hassle when used for multiple vehicles.
However, small diameter vehicles cannot be used as they are due to their structure.
View detail
The welding is ……
First impression is that it is lighter than expected. The welds are dirty for the price.
I think it is easy to use as a tool.
View detail
sense of stability
Rear, however, has many moving parts, and we are not sure about cheap ones, so we chose JTrip.
It lifts with light force and has no sense of instability.
When folded, the contact area is noisy with pushes and pushes, so self-adhesive tape is wrapped around it to cushion it.
For Caliper, there is an S-can, but it is not possible to hang it well with just the S-can, so a string or GEARThailand would be good.
Some say it is expensive, but once purchased, it can be used semi-permanently, so I think it is a worthwhile investment.
View detail
That's jTrip, easy to get up there.
I bought this to raise the Front of my ZrX1200 DAEG.
As long as you know the hang, you can go up without difficulty.
However, since it is unstable when tilted in Side Stand, it must be used with the Rear raised in Rear stand.
Once you get used to using it, you can easily raise the front, which is very useful. It is expensive, but it is a good product.
View detail
jtrip Front stand
It was easier than hanging the Rear stand. I use it for storage. View detail
I think the price is a little high.
Front stand for Mini bike.
I used it in NSF.
There is almost no rattling, and it stops exactly where it is supposed to.
I would have liked to have something to prevent losing the Piece.
View detail
Ideal for use with Grid
Although it requires a bit of hang, its lightness and compactness make it ideal for use in grids.
But I think it could be a little cheaper for this level of construction.
View detail
Finally changed Spec.
It is the J-TRIP of the industry top in the domestic product, but it was feeling regrettable with the cheap construction of the detail which seemed to be the one which had been sitting on Share until rather recently. The Nut which is used was especially touched with concern.
I don't know where the pride in calling oneself a domestic product lies in the spec. that says please use a normal Nut with a seat that is also used for a flat seat surface for a cylindrical Pipe.
With the recent Spec. change, we finally started to include a special Nut to match the Pipe shape.
There is a sense that this is one of the reasons for the price increase, but well, I feel that it is no longer intensely inferior to the others.
View detail
Well, I guess I'm glad I bought it.
I was watching World Endurance and SBK and saw that they were using similar Items, so I decided to go for it!
I may remove the Tire, but I don't mess with the Fork.
I'm satisfied with this product, but the instruction manual...
The explanation of how not to do this is good, but there is almost no explanation of how to use it.
The work is easy, but there is a certain amount of hang because it is a tool to lift heavy things.
If you hit the bottom of the fork at the wrong angle, it will slip and fall.
Well, the vehicle itself doesn't fall even if it fails because it is used together with the rear stand.
Also, the paint on the part of the body that touches the ground seems to peel off when the body is raised, so I'd like to see a new twist.
View detail
Reliability and ease
I bought this for my ZX-25R because I want to do front related maintenance.
I have already purchased the rear stand, and unlike the old days, the spec. of the V receiver etc. has been added.
Although it became possible to work quite easily, I was still nervous to lift it.
In comparison, the Rear is so easy to lift with just your fingertips, let alone one hand.
I was out of sync.
In order not to interfere with the Front Fender by hitting STAND.
I'm going to cure it, but the gap is really narrow here, and if it's a stiff and slippery Toweletc.
On the contrary, it becomes difficult to work. This is the only point to note.
Nowadays, cheap STAND is sold by other manufacturers, but I dared to choose expensive J-TRIP because
This Motorcycle J-TRIP vehicle was on display at Events.
The Staff was very helpful and promised to always buy from them! (Lol)
The structure is simple, so it may not be particularly outstanding in terms of performance.
I felt the reliability of a place that has been making them for a long time.
The price is the same, so it's nice to be able to choose various Coloring.
If I could make one request, I would like to see something that can be used for Off-road vehicles.
I probably checked all the manufacturers, but there were none.
Because it is unstable in Center UpSTAND at the time of the maintenance that removes the Fork of the Off car.
View detail
J trip for peace of mind
The price is high.
Used for long term storage in winter
View detail
Useful for cleaning the Wheel
It comes in handy when washing the Wheel.
It's so easy to wash, so buy it instead of worrying about it!
View detail
I use it to wash my car.
It's J-Trip's front stand!
I mainly use it to clean the Front wheel.
It looks like it may not work on some car models, so be careful!
View detail
Easy to use
Compared to the front stand which hooks to the steering hole, the STAND is lighter and easier to carry and store. As long as you don't do any maintenance (such as overhauling or adjusting the protrusion), this STAND will suffice. View detail
The stability is much better.
I used to use the Type that pushes up from the bottom of the FFork of JTrip, but the height I purchased this product for adjustment, stability, and work efficiency.
Before buying it, I was troubled with a certain BFACTORY product that many of my acquaintances are using, but the color that comes with it is I chose the JTrip, which comes with many.
I lifted the Front for now and it feels much better and much more stable.
I'm looking forward to removing and installing the Tire and front fork, etc.
View detail