Reviews
I was able to use it without concern from the beginning.
Purchase to prevent high grip tire's Tread surface change at low temperature.
I checked the method of STAND-UP with a video before purchasing.
In the case of GSX-R1000 K6, Color installation for Stem hole is unnecessary.
There are no Parts that need to be removed, and if you do it carefully during the Approach to Stem hole Dustclothetc. It is not necessary to cure with.
I was thinking about Fork up stand, which is cheap by nearly half of the fixed price, but since we can handle Handlebar Lock which can be used also for Maintenance around Front, we have chosen this considering long span.
As a result, I think that it was right to purchase at Sale price because the product making is also good.
* It deviates from Impression of Front stand, but I write two pieces of information related to reference.
- Although it is a vehicle with an equipment weight of about 200 kg although it is SS, there is hang that one person can safely STAND-UP. It is important to apply Rear stand.
1) Lock the Front brake lever by straightening the Handlebar
2) As in Photo 2, make the car body standing near the vertical slowly at Choi Hung Stand of the same Manufacturer
3) Confirm that Arm of Both Sides is hooked properly and RearSTAND-UP
As long as the Front stand is properly inserted into the Stem hole, there is no danger as much as Rear.
- It seems necessary to STAND-UP at low temperature Tire.
→ SUPERCORSASPV 2, α 13, RS 10 Type Retc. , Etc. That's RACINGGrade.
From this, Sports ~ Touring type Tire think that it is not necessary to do this.
If you are concerned, it is enough if you put a lot of air pressure and move the Motorcycle evenly and slide the ground plane.
The above is information from Mechanic of Tire exchange Shop.
View detail
Reliable Brand
Although I bought a cheap Front stand, I used it because I only used Lift up, I did not lift it, I used it for maintenance, but since I introduced Tire warmer, the number of Lift up will also increase I purchased it because I was able to Lift up GSX-R with my acquaintance with one hand.
Even if it is actually used, it can be easily lifted up without problems and it seems to be useful in the future.
It is reasonably elevated although it is slightly expensive.
View detail
I am very satisfied.
Originally I was using Fork up stand which supports with two stick type receivers, but to a wide extent, very strong force is required for Lift up, the Fork is likely to come off with a little thing, it is unstable, what I had a scary feeling, but this STAND also has a sense of stability, Lift up does not require much power, very compressed and good stuff.
It is recommended if you have a compatible Motorcycle with a hole in the bottom of Fork.
View detail
Ideal for beginners
I bought it to Race basefor Vehicle of CBR 250 RR. It was my first Maintenace Stand, but it was easier to use than I imagined. There is a Tube near the HandlebarStem so you need to be careful not to pinch it when lifting. View detail
Large Easy to use.
It was a product I was curious about before.
Do not think that you can easily Lift up so easily
I'm surprised.
Easy Motorcycle lifting, even if you do not have power, you can release without anxiety.
Because I am making well, Motorcycle Maintenance, Wheel polish etc. I want to use it for a long time.
View detail
This item has this Gold amount.
Used for ninja 1000 Be careful not to attach Wound to Fender when setting
When lifting it can be raised safely comfortably without anxiety during use.
View detail
Maintenance essentials
Previously, I used cheap items purchased with a certain ok, but I lack the height to lift the Front of the Liter machine, interfere with Cowl if I shoot Cowl ... And I'm worried about strength ...
At the time of Sale, I dared to buy it.
Because height can be adjusted, I think Kitchester Front will be raised, I will not interfere with Cowl and I'm glad I bought it.
FrontLift can also be done comfortably.
The difficulty is that when you Rose around Front, only that there is no place to hang Brake.
For the time being, I hang Brake with In Hemp palmak, but I wish SIDE to be able to hang Brake.
Overall, it is a very satisfactory product.
View detail
Satisfaction bought!
NINJA 2 Helmet50RR to Zentaiya's ZX-6RReplicaUpper Cowl equipped car!
Although I had a Rear stands, Front stand was holding on thinking about the price and frequency of use.
In replacing Front tire, I decided to purchase because I want to remove Front wheel !!!
We assumed that maintenance frequency will increase in the future.
We examined what kind of Manufacturer, but decided to J-TRIP same as Rear stands with emphasis on JAPAN reliability.
good point
- Even with Cowl can be lifted as it is.
- Can be lifted with light force
- There is Pipe strength
- Both SIDEHook in Hemp palm lock convenient
Good for temporary placement after removing Caliper
A bad point
- Manual manual Copy is too poor
It shrinks A4 further to A5 Thanks to SmallCopy, characters are small and it is hard to see
The important note is thin and can not be read at all
From the PL method - -
Supplement : I contacted Manufacturer and received it in PDF. Correspondence is good.
- Material : There are bubbles in PlasticTire (Really JAPAN?)
- Tire mounting parts color processing is 1 / 4 There is BALI and Bolt does not pass
In the corridor to be filly with File ,,, (Really JAPAN?)
- Interferes with Fender when removing Tire, it is safer to remove Fender from the beginning to prevent Wound
- expensive
View detail
Very easy to use!
I am using it for GPZ 900R.
Very easy to use, you can easily raise the Front and Maintenance will make progress.
I think that it is the case other than GPZ 900 R, but I have to think about handling such as Brake hose.
View detail
Normally it is enough if Maintenance
We thought as if we could rise with heavy car of GSX 1300 R HAYABUSAClass, but it went up very quickly.
There is a danger of falling down if you do not do height setting firmly.
When the height Balance is bad, I can not understand it because I can not do Lift up easily.
* Height Balance It may collapse if raised further in a bad state
○ Wheel cleaning
○ Wheel desorption
× Fork desorption
× Handlebar operation
I am using Wheel cleaning Main so it's enough.
When using this I think that it will be hard to get scratched if you put a curing tape on the part in contact with Fork.
The large size of STAND is also about the same as Rear stand, so it is not too troublesome to store it.
I have to count the number of times until I get used to it "ease of use" It is ☆ Minus 1.
View detail
It can not be used for Maintenance around Front
20 years ago Material : I bought Aluminum 's Front stand, but on the first day I used it
The welding where the steering stem is supported is peeled off, after that the lower half is used as Rear stands and the upper part of the weld is continued to be used for Boots drying.
From this topic, the Front side has never used only the type supported under CaliperMount.
When M1100 was used, I used FTire exchanges with the same Manufacturer, but when Tire and Shaft are removed, the STAND will be distorted inward and force to the transverse direction will be applied to FFork.
Shaft did not enter and it was a hard time when I put on Tire.
This product is durable and easy to use and satisfied.
I am surprised because it lifts with a light force.
It is bulky because it can be kept upright when not in use.
View detail
Please increase Color variations.
It is very easy to use as stated by everyone, and the appearance when using STAND is also Parenthesis so if you have plenty of time there is no loss by purchasing.
The only request "I'd like you to increase the color variations" is.
I'd like you to set Color that Lineup to Rear stand at least for the Front side !!
Well, as compared with Rear, Front's sales volume is small, but at the very least it is good ordering, so thank you..
View detail
Front stand of J-TRIP
? 【What made you decide the purchase?】
There are items of around 5000 yen in NetShop, but I made it reliable J-TRIP characteristics.
Moreover, Fender can be raised without hurting Fender with ForkUp.
? 【How was it actually used?】
I was worried that I could lift it well but I can lift it steadily by using with Rear stands. It is stable without fluctuation after lifting.
? 【Was it difficult to install? (Hard parts case)】
Just to be sure, you can lift without fear if you hold down Front tire or Cowl and lift it up.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
Butterfly Screw Since it is possible to change the width by tightening method, stabilizing by keeping the interval of Fork measured.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I want you to make it a little cheaper.
? 【Have you compared items?】
We also examined Front stand which lifts J-TRIP's Stem, but we made Cowl this item because it seemed to be Fender because of narrow gap of Fender.
View detail
J-Trip Truly Quality
I also run Circuit so I bought it for winding a Tire warmer.
Immediately, I tried to use '14 MT-09.
RearMaintenace Stand (Cheap goods of 5000 yen) With Rear raised,
I tried raising Front with this product, but I was able to raise it easily.
When loading on the Transporter, you can load it on the Compact by overlaying it with the Rear stand.
Because Large is also Compact, it is not troublesome to store.
Although Rear stand feels a bit expensive as it is overflowing with items that can be used even in super-discount items
There is only this price, the quality of the finish is also high, it is a very easy-to-use item.
I will not remove Front fork, but I want to use Tire exchange or Tire warmer - - -
I recommend you to those who say.
View detail
It is easy to use.
I used Roller to clean Wheel of Front, but it took a lot of power to turn Tire, but was troublesome, but J-TRIPJTrip Fork up stand makes it easy to use Lift up and is quite easy to use.
However, this making (Combination of just iron Pipe) I thought about this price.
View detail
I was happy to buy it.
It's user-friendly..
Until now Jack has carefully raised it carefully enough that it seems silly for me to feel stupid.
Indeed, it was good to buy !!
Nonetheless, just a combination of iron Pipe ,,, the price should be suppressed a bit more
View detail
Convenient!
If you do not desorb Fork, you can do Front up with this.
Using Rear stands simultaneously will rise without difficulty.
With this, you can easily perform Caliper cleaning and Wheel desorption.
You can use it on almost all vehicles.
Because storage also enters between Rear stands, it is good not to take a place.
View detail
After all J-TRIP
Originally I was considering with JT - 116, but as the price nearly doubled, Option is necessary for Ninja 1000.
If you do it for JT - 113, you can not use it for Maintenance of Front fork, but you can not do such a thing.
So it is a conclusion that JT - 113 BK will be enough.
Put on the hole under the Left SideFront fork and lift it up and Lift up.
Front also got up and cleaning of the undercarriage became easy with this.
Besides, since it is a size that fits snugly between Rear stand, I will not take up space to store it.
I'm glad I bought it ~. (Lol)
View detail
It is used for FZ1.FZ1 was a relation of management of the Brake hose, and since it could not use a Front stand, it was purchased reluctantly. -- it is lightweight and easy-to-use -- a Circuit -- having -- it is large-satisfied with progress havin
It is used for FZ1.
FZ1 was a relation of management of the Brake hose, and since it could not use a Front stand, it was purchased reluctantly.
-- it is lightweight and easy-to-use -- a Circuit -- having -- it is large-satisfied with progress having become easy.
View detail
Although the Rear stands was purchased last time and the Front was using the Roller stand, since it was splendid trouble, the Fork up stand was purchased this time. A Lift up can be carried out fairly simply in case of a 250-CC Motorcycle, and i
Although the Rear stands was purchased last time and the Front was using the Roller stand, since it was
splendid trouble, the Fork up stand was purchased this time.
A Lift up can be carried out fairly simply in case of a 250-CC Motorcycle, and it came to be also able to relieve the Maintenance of the circumference of a Front tire.
It seems that
structure is also solid and is likely to be durable.
The
price is also handy and COSPAR thinks that it is quite high.
View detail