Reviews
Tire warmer accompaniment
TitleOnly I bought it just to float the front wheel and wrap the Tire warmer around it.
I purchased this product because I have started to use a light van as a Transporter in my family Listra and it is tough to get the Front stand into the cargo area.
As expected from J-Trip, there is no problem with the quality.
View detail
Tire warmer accompaniment
I had brought in a STAND that lifts from the Front Stem, but the Transporter is now a light 4 and space is tight, so I bought this one. View detail
Workability Outclassing
At a quick glance, the price seems high, but after you use it, you'll be convinced!
(Mainly used in Large type cars)
It is well made and easy to use, so if you are not sure about STAND, we recommend this one. (^^)
There are many colors to choose from, so you can match it with your Motorcycle and decide on the right Parenthesis.
View detail
jtrip Front stand
It was easier than hanging the Rear stand. I use it for storage. View detail
I think the price is a little high.
Front stand for Mini bike.
I used it in NSF.
There is almost no rattling, and it stops exactly where it is supposed to.
I would have liked to have something to prevent losing the Piece.
View detail
Required for Maintenance
Ideal for tire replacement or front fender replacement.
It is somewhat difficult to lift when using it, but the Stem Hole Type may contact the cowl, but this one does not.
No worries!
View detail
It is useful for maintenance if you have it.
[How is it used?
Used in Front and Rear Set for vehicle maintenance and storage.
Did you receive the item as per the Image?
It is not as good as the Maintenance Stand for Rear, but it is a product that is placed relatively high in motorcycle supply stores, so you can check the actual product carefully before purchase.
How did you like it?
When I used it for the first time, I was surprised at how convenient it was. It can be easily fronted up without any effort.
Since it is inserted into the hole on the under side of the Stem, it cannot be used for maintenance work such as removing the Stem, but it is very useful for holding the vehicle stable when removing and installing the front wheel, overhauling the front fork, etc.
[Points to note]
As mentioned above, this product is fronted up by inserting it into the hole in the center of the Stem's Underneath. Please replace the supplied Holder (??? I don't know the name of the part) with the one that fits the hole of the vehicle you want to lift up.
Since the length of the front fork and the diameter of the tire and wheel differ depending on the vehicle, please adjust the height to suit the vehicle (or to suit the maintenance work) before use.
How did it compare to other products?
I have not seen front stands of other manufacturers, but I think the usability of this type of stand is the same as that of the Rear stand. Related parts are relatively easy to obtain." I think the first strength of the company is that it is a good place to start.
Color line nap is abundant as well as Rear stand, so it can be coordinated with MotorcycleManufacturer's image color (it is very good parenthesis if the front and rear colors are matched).
0Other items that may be useful include
Point and hang of installation
As mentioned above, the Attachment can be adjusted to match the Stem hole and the height to match the vehicle, so make sure to adjust it to your Motorcycle first.
[ITEMS TO BUY TOGETHER
Unlike the Rear side, there are no additional components that must be purchased for the Front stand.
Several types of attachments that plug into the Stem holes are included, so keep them in a safe place so you don't lose them (you may need them when you change Motorcycles).
[Opinions and requests to Manufacturer
As with the rear stand, please continue the lineup for many years to come.
View detail
J-TRIP J-Trip JTrip Front stand20
I used it on the front stand of a certain cheap product, but ZEPHYR1100 was too heavy for it, but the J-TRIP product has a multistage height adjustment system that allows for free height adjustment. However, the J-TRIP product has a multi-stage height adjustment system that allows for free height adjustment. However, the price is about double that of the Net product, so it is necessary to secure a budget. View detail
Ideal for use with Grid
Although it requires a bit of hang, its lightness and compactness make it ideal for use in grids.
But I think it could be a little cheaper for this level of construction.
View detail
Front stand is convenient to have.
[How is it used?
Used to secure Mini bikes for servicing and storage.
Was the one you received as per Image?
Since we have been using the front stand for medium to large engine displacement volume vehicles for a long time, this is a smaller version of the front stand, so it is exactly what you see in the Image.
How was your experience with it?
Of course, maintenance can be performed without it, but if it were available, work efficiency would be improved, and above all, a sense of stability when the front area is being upgraded would be appreciated.
It cannot be used for servicing the removed Stem, but other than that, this is all you need for servicing the Front section.
[Points to note]
The system is designed to be jacked up by inserting it into the lower hole on the Stem, so it will not work unless you use the correct collar for the Stem hole of the vehicle you want to jack up.
How did it compare to other products?
Although other companies' products of the same type have the same functionality, the strength of J-TRIP's Largeest may be that it has a wide variety of interchangeable parts and can be easily purchased at motorcycle accessory stores.
It is really helpful to be able to purchase parts at the nearest motorcycle supply store when parts are urgently needed due to breakage or loss.
0Other items that may be useful include
Point and hang of installation
Check the length under the stem and the large size of the stem hole in each vehicle, and adjust the length and replace the collar before use.
[Availability and clarity of the Instruction Manual
A simple Instruction Manual is included, please read it carefully and assemble it if you are a first time user. If you continue to use it on the same vehicle, you can continue to use it with the same settings.
[Notes]
As mentioned above, adjust the length and replace the collar according to the vehicle you want to jack-up.
If you might use it for a different vehicle, make sure you do not lose the several types of colors included in the package.
[ITEMS TO BUY TOGETHER
This Front stand is It is assumed that you are using a Rear stand." STAND, so if you do not already have a Rear Stand, you should also purchase the Rear Stand with gusto.
[Opinions and requests to Manufacturer
Front stand for Mini bike has less color variations than other stands. "White" "Red" I would like to see the addition of Green Light, Orange and Blacketc. colors, although I have painted them myself.
View detail
MaintenanceUser perspective
I have included a picture of the wheel removed, as it does not seem to be available in the other reviewers.
The underside of the lifting point is lined with rubber, so that if you hit the Front Fender
It is taken into consideration to prevent Wound from entering.
When lifting it up, I was able to lift it with one hand without requiring a large amount of force.
In the Motorcycle in the photo, the STAND height is raised from the lowest to the highest level. (Can be changed in about 4 steps).
The Elastic band is attached to the folded part to lock it so that it cannot be opened by itself.
It can be locked to prevent it from opening when not in use.
It could be stored independently and did not get in the way.
Included Parts:Two S-shaped hooks are attached to hang the Caliper.
It was supposed to be a Tie Band with an S-shaped Hook to tighten the STAND in just the right position.
I honestly don't use it.
View detail
Principles of ・・・・
I'm a DAEG rider. 。 There is no problem in using it, but the Horn is in the way as a lifting place, or it is not usable because of the Horn. 。 I had to install it next to the Radiator and even Horn it because I was going to have a car inspection.
Now, the main question is, why is it so easy to go up, and who thought of that?
View detail
BrakeMaintenance!
If you want to Front up easily, this is a good choice. View detail
Very easy to use
I am using it on a Z900RS and the Clearance with the Brake hose is about 1 to 2mm.
I am concerned and will put in Spacer.
View detail
I used it on my NSF100.
I used it in NSF100.
It is useful when performing maintenance such as wrapping the Warmer around the Front or removing the Fork.
It has about 3 Piece and can be used for various vehicles.
The quality of the product is as good as JTRIP's.
View detail
It's handy to have!
I had a front stand, but I found this product which is easy to insert into the hole at the bottom of the front CB400T and lift it up, and bought it immediately. The Rear stand is also made by the same manufacturer, so I can use it without any worries. Overall, I am satisfied with the product, although it is a bit expensive! View detail
Bracket Processing
I use it on my current model z1000.
Because it rides on the bracket that holds the brake hose in place.
I scraped a little with a sander.
The product is easy to lift up and is useful for maintenance.
View detail
Easy to Lift up
It is easy to lift up. At first, the top of the product could not be fixed, so I looked for a way to fix it, but it was unnecessary.
For more detailed information on how to lift up, please visit the official Channel of the Manufacturer, and you can also find the QR code in the Instruction Manual.
ninja400 (2018~) can be lifted up without shifting the position of Hornetc.
Now, if only the price would be a little over 10,000, that would be a perfect score.
View detail
For the price …
It is good for the purpose of at least STAND-UP the front, but the texture is subtle.
It rusts easily and the part where it is installed on the ground is worn away.
I thought it was CHINA.
There was a distinct lack of boss variety, and Grom needed a dedicated Adapigoo. (It costs about 5000 yen, so I made it myself)
View detail
J-TRIP Front stand Used for GSX-S1000 2015
I had the same J-TRIP product on my rear stand, so I bought this one.
I chose this one for my wife. It's so easy to use! It is very easy to use. Caliper removed during brake maintenance
The hook of Stainless and the point where the Elastic band is attached to the Body to carry in the folded state to hang the
I appreciate the care it takes to get it right. It is higher than other similar products, but I choose this one. The boss is also available for each car model.
It comes with several types, but my GSX-S1000 (2015) was Up possible without using any particular boss.
View detail