Reviews
Very easy to use
I am using it on a Z900RS and the Clearance with the Brake hose is about 1 to 2mm.
I am concerned and will put in Spacer.
View detail
I used it on my NSF100.
I used it in NSF100.
It is useful when performing maintenance such as wrapping the Warmer around the Front or removing the Fork.
It has about 3 Piece and can be used for various vehicles.
The quality of the product is as good as JTRIP's.
View detail
Easy to use
Used to adjust the balance of the Wheel.
It is thin and unobtrusive to put on the reverse side of the wheel.
The line that can be cut to the desired weight is included, so it is easy to cut and the adhesive is strong, so there is no worry about it coming off.
View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I am satisfied
I installed this product on my YZF-R46. I am satisfied with the quality of the product and I own J-TRIP's MaintenanceSTAND. View detail
Paint is tough!
The paint is durable and does not peel easily.
Functionally, there is no problem, but when the paint peels off...
I don't think it is beautiful when viewed as a custom.
The z900rs is a little difficult to STAND.
The longer length of this product is perfect for this purpose.
View detail
J-TRIP is the best!
I thought it was indeed J-TRIP!
I have one from another manufacturer, but it is easy to lift.
The stability after raising is good.
It's not something you replace that often, so there is a slight price difference.
I thought I could close my eyes. If in doubt, I recommend it!!!
View detail
Exactly on REBEL250
I am using it with J-TRIP SUPER Low (JT-1203) for use with REBEL250.
The Rubber is solid and takes the Rebel 250 well.
The fact that the Rubber does not interfere with the Silencer due to its height from the mounting bar was also a deciding factor in my purchase.
View detail
Fits: HONDA MONKEY125, HONDA glom, KAWASAKI Z125, HONDA APE100, HONDA XR50, HONDA XR100, HONDA APE50, HONDA NSF100, HONDA NSR80, HONDA NSR50, HONDA MONKEY, HONDA GORILLA50, HONDA MONKEY, HONDA GROM, HONDA GROM
Used for NSR50. Stable and usable.
Circuit and Garage, but it is lightweight, strong, and easy to use. The use of sturdy rubber at the point that supports the Swing Arm is also good because it prevents the Swing Arm from being scratched. View detail
Used in Transporter
Used for fixing in Transporter.
Other uses include Tire Replacement, ChainMaintenance, and ImageTraining at Seat.
As others have mentioned, the part that touches the ground is easily scratched, so it might be a good idea to apply a thin Rubber Seat or similar at the home center.
View detail
Graduated from Stand for Beginner (laughter)
I used to be careful and put the front wheel on WheelClamp before hanging Stand for Beginner, but if I use Clamp, why not just use V-shape? I now realize that this is not the case.
The V-shape is so deep that there is little risk of dislodging.
View detail
Fits: KAWASAKI Ninja650, KAWASAKI Z1000, KAWASAKI , KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI Ninja400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZX-10R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI ZSeries
DURACON on a Dare
The owner of the store where I purchased the motorcycle advised me that the conventional Gold Stand Hook would cause damage to the swing arm body in the event of a fall, and that DURACON would alleviate the shock by slipping or shaving.
I don't want to fall over and try it (laughs).
View detail
Fits: HONDA MONKEY125, HONDA glom, KAWASAKI Z125, HONDA APE100, HONDA XR50, HONDA XR100, HONDA APE50, HONDA NSF100, HONDA NSR80, HONDA NSR50, HONDA MONKEY, HONDA GORILLA50, HONDA MONKEY, HONDA GROM, HONDA GROM
Great Quaility product
I wanted a affordable, no frills paddock stand, so I ordered this for my Z125. Great quality (as expected from Japan) and looks very nice. Just note that it does not come with the swing arm hook, which you need to order seperately. View detail
It's handy to have!
I had a front stand, but I found this product which is easy to insert into the hole at the bottom of the front CB400T and lift it up, and bought it immediately. The Rear stand is also made by the same manufacturer, so I can use it without any worries. Overall, I am satisfied with the product, although it is a bit expensive! View detail
well made
The products of this manufacturer are well made and can be used for a long time.
The Motorcycle is strong enough to be lifted without rattling.
Since it is a relatively smallestAND, it is easy to secure a storage space.
Recommended
View detail
Can be STAND-UP by hand
I don't think there is anything better than this for maintenance of mini bikes and use in the circuit. It can be easily raised by hand. It is necessary to retighten it because it sometimes loosens. View detail
worth the money as expensive
Once you buy it, you will use it for a lifetime. The product price and shipping cost are quite high, but it is forgiven given the actual quality. This is my first time using the rear stand, so I bought it with half tension and half concern. Even if you do it two or three times, you can do it skillfully. Once you buy it, you will use it for a lifetime. The product price and shipping cost are quite high, but it is forgiven given the actual quality. This is my first time using the rear stand, so I bought it with half tension and half concern. Even if you do it two or three times, you can do it skillfully. View detail
Reliability
Used for Circuit driving with YZF-R25.
It is firm enough to hang safely even when STAND-UP.
Four rollers are also included for easy STAND-UP.
It is also very reliable as many people use it in Circuit.
View detail
A classic.
I have been using it for daily maintenance and circuits for a long time, and have been using the regular color Red for many years. I replaced it because the screw holes for fixing attachments and tires were getting damaged, the paint was peeling, and rust was increasing.
I purchased the Option Orange color, and the quality of the paint and the coloring is beautiful.
The handle is long and the roller's rotation is light, so the body can be raised with light force.
The weight of the product itself is not as heavy as the Stainless SteelRear stand made by Battle factory, but I personally think it is much more comfortable to use.
View detail
Bracket Processing
I use it on my current model z1000.
Because it rides on the bracket that holds the brake hose in place.
I scraped a little with a sander.
The product is easy to lift up and is useful for maintenance.
View detail
Easy to use
Purchased for use with YZF-R25 Circuit.
Four rollers are also included for easy STAND-UP.
It is also Outclassing in reliability as many people use it in Circuit.
View detail