Reviews
Since the undercowl was attached, it purchased for the maintenance of a chain & wheel which removed the center stand. It is OK by power in which it is really easy and the about the same as applying the stand of a mothers' bicycle. This stand is a
Since the undercowl was attached, it purchased for the maintenance of a chain & wheel which removed the center stand.
It is OK by power in which it is really easy and the about the same as applying the stand of a mothers' bicycle.
This stand is a recommend.
View detail
Although V receptacle was used, the normal rear axle shaft was written at the hollow chromoly shaft, popularity was won for the first time, and the set was purchased. Incidentally, since a shaft does not penetrate, the axle shaft of normal is attentio
Although V receptacle was used, the normal rear axle shaft was written at the hollow chromoly shaft, popularity was won for the first time, and the set was purchased.
Incidentally, since a shaft does not penetrate, the axle shaft of normal is attention.
It is light although it was used instantly... The lift up of the 1200-cc car body [ 200-K ] can be truly carried out in about the same lightness as a mothers' bicycle.
there being sense of security farther than V receptacle, and saying -- it is -- once [ * ], if it is used, this cannot be stopped.
exchanging for V receptacle, when taking a rear wheel into pieces in my case -- daily use -- this -- popularity was won for the first time, and it came out, and is using it.
It is quite a recommend.
View detail
By tire change, car wash, etc., he thought whether it would be required and I purchased. A price is also enough to use that it is handy and ordinarily. It is convenient, if there is one since it can be used for almost all motorcycles by the type i
By tire change, car wash, etc., he thought whether it would be required and I purchased.
A price is also enough to use that it is handy and ordinarily.
It is convenient, if there is one since it can be used for almost all motorcycles by the type inserted in the hole of the Faulk bottom.
View detail
It purchased for maintenance of a chain, etc. V receptacle type is used. Although one person can also hang a stand, when an emergency thing was considered and I had you help, I got it to be safer for other persons to support a motorcycle. I th
It purchased for maintenance of a chain, etc.
V receptacle type is used.
Although one person can also hang a stand, when an emergency thing was considered and I had you help, I got it to be safer for other persons to support a motorcycle.
I think that those who maintain by themselves have and there is no loss.
View detail
Fits: DUCATI MULTISTRADA 1000DS 1000, DUCATI STREETFIGHTER848, DUCATI MONSTER796, DUCATI Multistrada 1100/S, DUCATI MONSTER1100EVO, DUCATI HYPERSTRADA, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD796, DUCATI 996, DUCATI 998, DUCATI 848, DUCATI 916, DUCATI 748, DUCATI 748, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI HYPERMOTARD796, DUCATI HYPERSTRADA
In using cantilever stand JT-136, they are indispensable parts. Although collected into the column corresponding to a vehicle type with the grade, I correspond also to Monster S4R.
In using cantilever stand JT-136, they are indispensable parts.
Although collected into the column corresponding to a vehicle type with the grade, I correspond also to Monster S4R.
View detail
Very easy, although it is used by ZRX1100!! A stand-up can be carried out lightly alone. It is as light as it became that power is put in too much and it is likely to fall conversely when the first. Also when taking down, it can take down with SUT
Very easy, although it is used by ZRX1100!! A stand-up can be carried out lightly alone.
It is as light as it became that power is put in too much and it is likely to fall conversely when the first.
Also when taking down, it can take down with SUTSU and a ton.
It is very pleasing.
Maintenance became pleasant.
View detail
It purchased together with the stand for the first time. For the first time, since it is troublesome to remove a surroundings check pin usually although it lets an axis pass to an axle shaft, the stand is found useful. For the moment, there are no
It purchased together with the stand for the first time.
For the first time, since it is troublesome to remove a surroundings check pin usually although it lets an axis pass to an axle shaft, the stand is found useful.
For the moment, there are no omission and it can use satisfactorily.
View detail
Since there was no center stand in XJR400, it purchased to maintenance. As it is in Mr. Manufacturer's HP, lift up can be carried out really simply. I did not think that it could do that honestly comfortably. The maintenance of the circumferen
Since there was no center stand in XJR400, it purchased to maintenance.
As it is in Mr. Manufacturer's HP, lift up can be carried out really simply.
I did not think that it could do that honestly comfortably.
The maintenance of the circumference of rear one becomes very easy, and is large satisfaction.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
Red is purchased. I think that you may become a rather famous one point.
Red is purchased.
I think that you may become a rather famous one point.
View detail
Although it was the first stand, since there was no fear of a stand separating, lift up was actually able to be carried out in comfort. Moreover, a 200-kg motorcycle is lightly lifted in this size. In addition, since paint application of a stand w
Although it was the first stand, since there was no fear of a stand separating, lift up was actually able to be carried out in comfort.
Moreover, a 200-kg motorcycle is lightly lifted in this size.
In addition, since paint application of a stand will separate if it is used by Kami of asphalt, the direction to worry is considered as it is better to cover with some downward.
View detail
It is really easy. Although an animation can also be seen by HP, it can construct on one leg, supporting a motorcycle with both hands. I think that it cannot return to a former stand if a veteran also experiences this comfort. Moreover, since
It is really easy.
Although an animation can also be seen by HP, it can construct on one leg, supporting a motorcycle with both hands.
I think that it cannot return to a former stand if a veteran also experiences this comfort.
Moreover, since there are few overhangs, it can be used in the same space as the time of keeping it by the side-stands & motorcycle cover.
There is no fear of being hooked in a set parking area etc., and it is safe.
Maintenance is truly easy if there is a stand.
He buys it and there is no loss.
In the direction of a vehicle type without a center stand, it is a recommend.
View detail
Fits: その他 , YAMAHA V-MAX 1680, DUCATI SPORT1000, DUCATI PAUL SMART1000LE
On vehicles without a center stand, I think that they are necessaries. Since especially their own vehicles were spoke wheels, cleaning of a spoke and maintenance of the chain could perform them to RAKU considerably, thanks to this. I think that it
On vehicles without a center stand, I think that they are necessaries.
Since especially their own vehicles were spoke wheels, cleaning of a spoke and maintenance of the chain could perform them to RAKU considerably, thanks to this.
I think that it is an article which is handy also as for a price, has it and does not have loss.
View detail
A rear axle is made to carry out shaft penetration, and a motorcycle and a stand can maintain the state where it always stuck. So, since a ground surface can certainly be contacted by three points of two rollers, a rear tire and a stand, when making v
A rear axle is made to carry out shaft penetration, and a motorcycle and a stand can maintain the state where it always stuck.
So, since a ground surface can certainly be contacted by three points of two rollers, a rear tire and a stand, when making vertical the motorcycle in front of lift up, a tail cowl can be held with both hands and there is sense of stability very.
Moreover, lift up is also light and it can simplify it on one leg.
Since the lift of the motorcycle can be carried out safely anyhow, in beginners, it is recommendation absolutely!
View detail
Fits: YAMAHA , DUCATI MONSTER S2821, TRIUMPH DAYTONA675, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA SL750, APRILIA RS125, APRILIA RS250, YAMAHA , TRIUMPH Daytona 675, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750, DUCATI Panigale 899, DUCATI Monster 821, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750
Silver is chosen so that it may not become the same as a body color, and it may be conspicuous. Since appearance is visible to a race ish (>=竏?=), it is b.
Silver is chosen so that it may not become the same as a body color, and it may be conspicuous.
Since appearance is visible to a race ish (>=竏?=), it is b.
View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Since it had a roller stand of J-TRIP, he wanted to attach and use this hook bolt, and it was purchased. The color of my motorcycle chose red for the red system. The place with this sufficient product is the form which only a J-TRIP original manuf
Since it had a roller stand of J-TRIP, he wanted to attach and use this hook bolt, and it was purchased.
The color of my motorcycle chose red for the red system.
The place with this sufficient product is the form which only a J-TRIP original manufacturer's product has and is easy to apply to V hook receptacle by the side of a stand.
Furthermore, it can be satisfied also with a lightweight thing and the beautiful quality of an anodized.
If it purchases according to the color of its own motorcycle, it will also become a one point of KASUTAMU.
Since it is good goods, it is a recommend also at you.
View detail
It is five * without a complaint. Although it was as uneasy as ? in whether it goes up really simply, power was hardly needed, either but was improved simply. There is also no fear of the rubber band which fixes a front brake being attached, and r
It is five * without a complaint.
Although it was as uneasy as ? in whether it goes up really simply, power was hardly needed, either but was improved simply.
There is also no fear of the rubber band which fixes a front brake being attached, and running in front.
Since it is a wheel penetration type, it cannot be used for a tire change, but since it is stabilized that much, chain cleaning etc. can maintain comfortably every day.
Moreover, it can respond to a tire change etc. by changing the receptacle of a stand by optional parts.
View detail
Fits: DUCATI MULTISTRADA 1000DS 1000, DUCATI STREETFIGHTER848, DUCATI MONSTER796, DUCATI Multistrada 1100/S, DUCATI MONSTER1100EVO, DUCATI HYPERSTRADA, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD796, DUCATI 996, DUCATI 998, DUCATI 848, DUCATI 916, DUCATI 748, DUCATI 748, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI HYPERMOTARD796, DUCATI HYPERSTRADA
Perfect to S2R1000! With [ it plays and ] none of most wobbles!
Perfect to S2R1000! With [ it plays and ] none of most wobbles! View detail
It is most important that it can use even place [ narrow ]. It is large activity also at an inner dirty and narrow garage. (It is quite obvious if I have a picture seen) If it gets used, use by itself can also be performed in comfort.
It is most important that it can use even place [ narrow ].
It is large activity also at an inner dirty and narrow garage.
(It is quite obvious if I have a picture seen) If it gets used, use by itself can also be performed in comfort.
View detail
Since the rear shaft was using it for Ducati in the air until now, the shaft type was used, but since it needed to be used for a wife's motorcycle, L receptacle was purchased. Although it was trustworthy that the shaft type of the possibility of an ac
Since the rear shaft was using it for Ducati in the air until now, the shaft type was used, but since it needed to be used for a wife's motorcycle, L receptacle was purchased.
Although it was trustworthy that the shaft type of the possibility of an accident is lower, the raw material on which it is hard to slide is used, and it was able to use, without becoming so nervous.
That L receptacle rotates also has the expensive point.
It is a recommend also in the unfamiliar one.
View detail
A correspondence vehicle type is HONDA. : XR50 motard : Although it is XR100 motard, Mr. Webike is unknown in why such an indication is given. Other vehicle types can also be used satisfactorily and it has become a general-purpose article even in the
A correspondence vehicle type is HONDA. : XR50 motard : Although it is XR100 motard, Mr. Webike is unknown in why such an indication is given.
Other vehicle types can also be used satisfactorily and it has become a general-purpose article even in the maker site.
Since the minimum quantity and a lift amount can adjust with one screw in three steps, it can be satisfactorily used to a full size-off vehicle~motocrosser as well as a motard.
Since it is the simple structure which occurs only by applying weight by the principle of a lever at one shot, it is considerably durable.
Since the support rack is monotonous, the same stand of the other company does not have the quite satisfactory constancy of a motorcycle, but since this is four-point support, it is preeminent also for stability! Since a price is also cheap, it is super-recommendation.
View detail