Reviews
Fits: APRILIA RSV1000 Series, DUCATI Panigale 899., APRILIA RS125, APRILIA RS250, DUCATI MONSTER S2821, TRIUMPH DAYTONA675, YAMAHA , APRILIA SL750
Easy to use
I use it for STAND and it is safe to use without gapping. View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI ninja, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
I purchased this along with J-TRIP's Maintenance Stand.
I had been using another Manufacturer's, but it was scratched all over, so I had to replace it.
Since we are using J-TRIP's Maintenance Stand V receiver, we chose the same manufacturer's V receiver this time, considering compatibility. However, since the Ninja 1000 is equipped with an external exhaust system, it is OK to leave the silencer on.
Raising and lowering the Maintenance Stand is also no problem as it is from the same Manufacturer.
However, when installing it on the Ninja 1000 and raising and lowering it, the space between the swing arm and the V-receptacle is quite narrow and may interfere (and possibly scratch it), so we are considering whether we should put a Spacer of about 5mm each between them.
The color I chose was red, and it is a good color addition to my motorcycle, which is all black.
I am satisfied with PetitCustom, which is both practical and dress-up.
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Wound-resistant DURACON
I used to use a Hook bolt also made by J-TRIP, but after repeated use, the bolt was too heavy.
The scratches on the surface of the wheel have made it look dirty, so we decided to replace it with DURACON, which has been used on Ninja 250R and has a good track record.
It is DURACON, so any scratches are not noticeable.
View detail
Fits: KTM RC8, KTM RC8R, KTM DUKE, KTM Adventure
Good vibes
It was the right product for my needs. View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Used for ZX-4R
I was worried about whether I could attach it to the 4R because I couldn't find any information about it, but I was able to attach it without any problem. View detail
j-trip Swing arm hookBolt
High quality and easy to use.
Note that Long is for z900 only.
View detail
Fits: YAMAHA , TRIUMPH DAYTONA675, DUCATI Panigale 899., DUCATI MONSTER S2821, APRILIA RSV1000 Series, APRILIA RS250, APRILIA RS125, APRILIA SL750
Works well with J-TRIP's STAND
[How is it used?
Used in conjunction with the company's Rear stand in Circuit
Was the one you received as per Image?
Yes
Was the installation difficult?
It is very easy to attach to the OEM Swing Arm by simply attaching it to the original Screw Mount with the included Bolt.
How was your experience with it?
There is no problem at all for the purpose of use. I installed White because I thought Black would stand out because the Swing Arm is Silver. I think it goes well with J-TRIP's Rear Stand.
[Included Parts:were they on?
Bolt and Washer required for installation
[Was there anything that disappointed you?
Nothing in particular, but a little cheaper would be better.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
There are no particular installation points, but be careful not to overtighten the bolt because the side to which it is attached is aluminum and the bolt is steel.
View detail
J-TripOEM Product
It hangs well, and the compatibility with J Trip's STAND is as OEM as you would expect. The extension collar reduces the risk of scratching the swing arm. It may not be good for those who wear it all the time because it looks longer, but we chose this one because we remove it every time we use it. The color will fall off if you are not careful when removing it, which is a slight minus point. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
no problem
I used it on my Z900RS.
I had previously used an anodized swing arm hook on another motorcycle, but it originally interfered with the Jack, so it was scraped off and the substrate showed.
The swing arm hooks here are made of a plastic-like material, so the color did not peel off even after hanging jacks.
I was also satisfied that it was long enough to not interfere with the Swing Arm.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ZX10R, KAWASAKI ZX6R, KAWASAKI NINJA400, BMW S1000R, BMW S1000RR, DUCATI 749, DUCATI Late 999, HONDA , KAWASAKI ninja, KAWASAKI Ninja 1000SX, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), SUZUKI , TRIUMPH DAYTONA675
For Transporter loading
The GSX150BANDIT has a Center Stand, so maintenance is easy, but when loading the Transporter, it is better to use the Racing Stand and Wheel Clamp to hold the motorcycle in place so that the Tie Down does not have to be closed so tightly. However, when loading the Transporter, it is better to use the Racing Stand and WheelClamp together to hold the motorcycle in place, so there is less wobbling. View detail
Fits: KAWASAKI Z1000, KAWASAKI ZX10R, KAWASAKI ZX6R, KAWASAKI NINJA400, BMW S1000R, BMW S1000RR, DUCATI 749, DUCATI Late 999, HONDA , KAWASAKI ninja, KAWASAKI Ninja 1000SX, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), SUZUKI , TRIUMPH DAYTONA675
DURACON in White on a dare
DURACON to soften the impact of shaving in the event of a fall, and WHITE for visibility when STAND is applied.
As a byproduct, the anodized material of the Gold genus peels off when STAND is applied, and becomes scraggly, but for some reason, this one does not get scratched.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Ninja400, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-12, KAWASAKI ZX-10R, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja650, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI , KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI Z250
Perfect even if not on the conforming List.
The conformity is
BALIUS2、ZrX1200S、NINJA 250 ABS、ZX-6R、ZX-6RR
Ninja250SL is not mentioned.
Just tear the packet and Bolt On and it is perfect.
Now you can do a V-shaped Lift!
A must for self-maintenance of the undercarriage!
So, I have been using it for a long time, and as expected, Anodized is fading.
But, well, Wound is also something that comes in when it is received by Hook and can be applied by Mame in the future.
Large thing is that it will hold Firmly, so
No problems at all!
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI ninja, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
It combines practicality and good looks.
It is practical yet stylish on the feet. View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Used on GSX-R1000 K5
I bought this for cleaning around the rear area and chose the one made by J-trip because I had used it on my GSX-R125. I was a little nervous when I had to lift a 1000cc bike, but once it was up, it was stable and secure. View detail
Can also be used as dress-up parts
The Swing arm hookBolt is supposed to be attached and removed every time the STAND is used, but this product has a small protrusion from the Swing Arm and does not interfere with the OEM exhaust system when the Swing Arm is raised or lowered during driving on the Z900RS, so it can be left attached. So there is no problem even if you leave it on. You can choose your favorite color and enjoy it as dress-up parts. View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I am satisfied
I installed this product on my YZF-R46. I am satisfied with the quality of the product and I own J-TRIP's MaintenanceSTAND. View detail
Paint is tough!
The paint is durable and does not peel easily.
Functionally, there is no problem, but when the paint peels off...
I don't think it is beautiful when viewed as a custom.
The z900rs is a little difficult to STAND.
The longer length of this product is perfect for this purpose.
View detail
Fits: KAWASAKI Ninja650, KAWASAKI Z1000, KAWASAKI , KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI Ninja400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZX-10R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI ZSeries
DURACON on a Dare
The owner of the store where I purchased the motorcycle advised me that the conventional Gold Stand Hook would cause damage to the swing arm body in the event of a fall, and that DURACON would alleviate the shock by slipping or shaving.
I don't want to fall over and try it (laughs).
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI ninja, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Mounted on Z400
[How is it used?
Installation for Maintenance.
Z400 (Current Ninja 250, 400) If you are using a Swing Arm to receive a Hook, it is better to use a Hook, as it may interfere with the Winging.
Was the one you received as per Image?
It was Red Anodized, but I think it would have been better if it was a darker color.
Was the installation difficult?
Very easy to install, if you have the right size hex wrench and are willing to use STAND to raise the rear, you will have no problem.
Medium strength screw lock agent (Locktite, THREEBOND, GACHI Screw, etc. anaerobic adhesives) can be used together to reduce the possibility of Screw loosening due to vibration.
How was your experience with it?
As it is a dedicated product, it works well with JTrip's STAND in a large way.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Anodized coloration (Red)
What you need to prepare when you install it.
Medium strength screw lock agent
Removable medium-strength is recommended, as it will need to be removed when the anodized color fades.
View detail
Fits: YAMAHA , TRIUMPH DAYTONA675, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA SL750, APRILIA RSV1000 Series, APRILIA RS250, APRILIA RS125, YAMAHA , TRIUMPH Daytona 675, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750, DUCATI Panigale 899, DUCATI Monster 821, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750
No problem with popping it on.
The aprilia RS250 First Model Type LD0, which I got second hand, can be attached to the screw hole that was originally on the Rear Swing Arm without any problem.
I don't know how it works as a slider since I haven't rolled it. But it works well as a support point for the Rearcaster stands, and above all, it's cheap!
View detail