Reviews
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I went with Gold...
I bought it to go with the rear stand, but I think it would be fine with other Manufactures.
The color jumps with age when exposed to the sun, I think the same for the others.
If so, I'm glad it was inexpensive.
View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Well, I managed.
I purchased STAND because it is easier to clean the chambers by standing them up. STAND is especially good for cleaning the Chain.
The stand hook no longer interferes with the OEM muffler on the 1000SX, but the gap between the stand bracket and the swing arm is narrower because the stand hook is shorter. The stand and stand bracket are J-TRIP's short roller stands and V-suke 1.
As a countermeasure, we fixed the protective cover of the receiving bracket with tape so that it would not come off even if it rubbed against the swing arm, and inserted two washers (made by KITACO) with an outside diameter of 14mm, an inside diameter of 8mm and a thickness of 1mm into the hook bolt to widen the gap between the receiving bracket and the swing arm. I decided to insert two washers (made by KITACO) of 14mm OD, 8mm ID, and 1mm thickness into the hook bolt to widen the gap between the bracket and the swing arm.
I think the receiving bracket is made of steel, but the hook bolt is made of aluminum. The Kawasaki OEM hook bolt I used on my old motorcycle was stainless steel, and I prefer stainless steel as a tool. It feels worn, but it is not noticeable and does not scrape.
Incidentally, I have PLOT's LowdownKIT installed, but the gap between the tire and the stand is narrow, and depending on the brand of tire, it may interfere with the stand. In that case, you can raise the stand one step, but the gap between the fender and the stand will be narrower, so it will be a little harder to step on the fender with your foot, and the higher the stand, the heavier the stand clamp will be.
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
good
Since it is the same Manufacturer as STAND.
Because it is not as flashy as other Manufacturers.
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Anodized or DURACON?
I bought DURACON because using Anodized Hooks inevitably results in Anodized peeling and scratching after use.
I purchased the black color and the scratches from use are not noticeable, but the black color is turning white due to sunburn.
In this respect, the White color may not be noticeable.
It is simple, so it does not have the same dress-up effect as the Anodized version, but I like the simplicity of the smallest necessary limit.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Z1000, KAWASAKI ZRX1200, KAWASAKI ZX-10R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI Z250, KAWASAKI ZSeries, KAWASAKI BALIUSII, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI Ninja650, KAWASAKI ZRX1100, KAWASAKI Ninja1000, KAWASAKI ER4, KAWASAKI ER-6n
Required for Maintenance
Of course, if you use a V-shaped receptacle, you'll get scratches on the skin.
Anodized will be peeled off If you are worried about it, you should buy Silver.
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Enough for its intended use.
I bought it as a necessary part to use the STAND to hook the STAND. Rather than the paint peeling off in a true aluminum colored product, etc. Good, I decided on this one.
I don't know if DURACON is a rare material or not, but it is 2000 for this one. What do you think of the Yen Over?
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI ninja, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
It's a little light in color
Easy to install
The drawback is that the color is a little light
The price is inexpensive, so it's a good cosmetic experience
I think it's good for Dress-up Accent
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Required to use HookSTAND
HookSTAND cannot be used without it
An L shaped rear stand is fine, but in the case of my car, I have to use the Exhaust System and Swing Arm sensation is narrow, and if you don't get it right, it will interfere with the exhaust system You want to make sure that STAND is raised and stable If you want to service the vehicle, I think you should use HookSTAND Since these are the parts you need to do that, I would be surprised if I bought the vehicle, I would use the Exhaust System I bought it before the
View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ninja, KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, HONDA , DUCATI Late 999, DUCATI 749, BMW S1000RR, BMW S1000R
I was just..
I bought Black for my NINJA1000SX
Installation takes only a couple of minutes with a hexagon
I don't expect it to be very durable because of the Black paint in Aluminum
There doesn't seem to be any interference with the AXIS Lapo's exhaust system, even with two people in the car
OEMs are unchecked
The downside of the largest is that the recessed area is the Swing Arm and [Color] Too little Clear, so the Y-shaped Bracket makes contact
It would be nice if they could improve the dimensions of the unevenness of the product, although it may be a universal product
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
To make maintenance easier
ChainMaintenanceetc. I bought it to make it easier
With this attached, the sense of stability when raising the rear wheel with MaintenanceSTAND is different
I also think that it will not break as soon as it is solidly made
View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
J-TRIPJTrip Aluminum Swing Arm Hook Bolt
I purchased it because it is necessary for using Maintenace Stand. Although looking coloring is good, it can be used as a function without problems, but despite purchasing a product to which Ninja 250R is applied, Screw Mountain is not matched?! It was very hard or hard to install. (Although it is Tolka, Bolt (lol) )
Those who are considering purchasing, I think that it is better to refer to the Impression overall of this product, as the above problem does not apply to your own Motorcycle.
(Although it was difficult to install, because it was able to use it without being able to do it, "Recommended" You are. )
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
A Maintenance stands is united and it purchases by the same maker. A color chooses red according to a car body. The Spacer has been put in and attached satisfactorily. Intensity also seems to be satisfactory. However, although it is not a problem
A Maintenance stands is united and it purchases by the same maker.
A color chooses red according to a car body.
The Spacer has been put in and attached satisfactorily.
Intensity also seems to be satisfactory.
However, although it is not a problem of a maker, since it cannot run Ninja1000, with a Hook bolt attached if it is still a standard Muffler, it has removed each time.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
It purchases by the same Manufacturer as a Maintenance STAND. The Maintenance progresses.
It purchases by the same Manufacturer as a Maintenance STAND.
The
Maintenance progresses.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
In order to use V Hook in a Maintenance STAND, it changes into V Hook from a purchase L character receptacle, and becomes easy to do a Lift up. I also regard red's Anodized as your becoming an Accent. Although the effect as a SLIDER50 is also st
In order to use V Hook in a Maintenance STAND, it changes into V Hook from a purchase
L character receptacle, and becomes easy to do a Lift up.
I also regard
red's Anodized as your becoming an Accent.
Although the effect as a SLIDER50 is also stated by
description of item, I think that the duty probably is not achieved.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
Since the STAND of JTRIP was used, it purchased. If the Homepage of this Manufacturer is seen, it understands, but the very polite product explanation which the animation etc. used can be purchased in comfort. Although I thought that this Hook bolt itse
Since the STAND of JTRIP was used, it purchased. If the Homepage of this Manufacturer is seen, it understands, but the very polite product explanation which the animation etc. used can be purchased in comfort. Although I thought that this Hook bolt itself did not have a difference so much with the other company, it decided with no problem from the sense of reliability to a Manufacturer. View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
There is a little expensive Image as compared with an imitation. Carrying out only , elaboration is solid and it can trust quality.
There is a little expensive Image as compared with an imitation.
Carrying out only
, elaboration is solid and it can trust quality.
View detail
Fits: YAMAHA , DUCATI MONSTER S2821, TRIUMPH DAYTONA675, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA SL750, APRILIA RS125, APRILIA RS250, YAMAHA , TRIUMPH Daytona 675, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750, DUCATI Panigale 899, DUCATI Monster 821, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750
It purchased in order to use a Maintenance stands. Since M6 and a Bolt were thin and durability was uneasy although he thought that he would buy a cheap product, J-Trip was used. Although it is unavoidable, if a Lift up is carried out several times
It purchased in order to use a Maintenance stands.
Since M6 and a Bolt were thin and durability was uneasy although he thought that he would buy a cheap product, J-Trip was used.
Although it is unavoidable, if a Lift up is carried out several times, does paint application of a Hook come off?
A Chain Maintenance becomes easy now anyway.
They are
and Screw-lock recommendation.
View detail
Fits: YAMAHA , DUCATI MONSTER S2821, TRIUMPH DAYTONA675, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA SL750, APRILIA RS125, APRILIA RS250, YAMAHA , TRIUMPH Daytona 675, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750, DUCATI Panigale 899, DUCATI Monster 821, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750
[Webike Monitor] It purchases in accordance with the STAND. Although it is slightly high, since he does not buy it frequently, isn't it appropriate? Since it attached at the time of Maintenance, there should just also have b
[Webike Monitor] It purchases in accordance with the
STAND.
Although it is slightly high, since he does not buy it frequently, isn't it appropriate?
Since it attached at the time of
Maintenance, there should just also have been a Steel low-priced edition.
View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF1000, YAMAHA YZF 750R, YAMAHA YZF-R7, YAMAHA TZR250, YAMAHA FZR400, YAMAHA TRX850, YAMAHA , YAMAHA , YAMAHA FZR400, YAMAHA TRX850, YAMAHA YZF 750R, YAMAHA YZF-R7, YAMAHA YZF1000, YAMAHA YZF750SP, YAMAHA FZR400, YAMAHA TRX850, YAMAHA YZF 750R, YAMAHA YZF-R7, YAMAHA YZF1000
I want you to attach an easy instruction manual. If it can actually do altogether, it will be conviction, but when using it for the first time, there are trial and error, and a crack goes into a color Hook. in the case of ZRX1200 used by the
I want you to attach an easy instruction manual.
If it can actually do altogether, it will be conviction, but when using it for the first time, there are
trial and error, and a crack goes into a color Hook.
in the case of ZRX1200 used by the
Wide Type and exclusive V Hook, car width is not suited, unless it makes the color of
attachment bite in the case of attachment to the
Swing arm, without being alike now and attaching a Hook and attaches.
It is although there should just be a description a word as is written.....
View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
It is used in CBR1000RR 2005. Although it is , it is a grade usually To use, since the receptacle is used for the first time of J-TRIP, when going to run a Circuit. Naturally I think that the affinity with the STAND of the company is
It is used in CBR1000RR 2005.
Although it is
, it is a grade usually
To use, since the receptacle is used for the first time of J-TRIP, when going to run a Circuit.
Naturally I think that the affinity with the STAND of the company is good.
Since the color of the
Motorcycle is blue, it also becomes an Accent of a little color.
if the Bolt hole is worrisome also at those who do not use the
Stand hook --
-- an ant also attaches to a Dress-up of little appearance up.
Locking, such as a Screw lock, considers that it is better to be carried out for the
sense.
Since it has the experience in which the Stand hook has loosened by Motorcycle which had ridden once [
] at ancient times ..
View detail