Reviews
Fits: KAWASAKI BALIUSI, KAWASAKI ZEPHYR400 χ, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI , KAWASAKI XANTHUS, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZXR250, KAWASAKI ZRX400
For future maintenance
Purchased in anticipation of future maintenance using the Maintenance Stand.
Installation is as simple as tightening the bolt.
View detail
In conjunction with Tire replacement
[How is it used?
I bought it to get WheelBalance along with Tire replacement.
I was not particularly particular about the Manufacturer, but I chose JTrip because it is a product of JTrip, a long-established STAND company.
Was the one you received as per Image?
I chose 1 Piece because I don't use it often.
As shown in the photo, the Weight is alternating between 5g and 10g.
How was your experience with it?
I have been using it without any problems.
I cut it to the desired Large size, temporarily fixed it with curing tape, and rechecked it repeatedly.
One piece is sufficient for the front and rear wheels of one vehicle.
[Points to note]
To prevent peeling, it is safe to thoroughly clean and degrease the Wheel before applying it.
【Review】
This is the first time I have purchased this product and so far I have had no problems with it.
It is good to be prepared in conjunction with Tire replacement.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
Used for Z650RS
It is for Z900RS, but it was attached to Z650RS normally. View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 1000SX, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI ZX6R, KAWASAKI Z800, KAWASAKI Z1000
2018 Ninja 650s should take note!
The JT-107D is applicable to the 2018 Ninja 650.
Note that Webike's List is wrong!
The Manufacturer QR code was also unreliable because the information was out of date.
Thank you to those who alerted us with their impresarios.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
J-TRIP
It is the only cheap J-TRIP where everything is sold separately.
This makes it very easy to raise Motorcycle.
View detail
Let's repair a product that's about 14 years old.
I decided to do my own maintenance for the first time in over a decade, and pulled out the maintenance stand, but the rubber on the roller had deteriorated to the point where it was falling apart …….
I thought about buying another one, but I found Repair Parts, so I gave it a try.
The shape looked right, but the Bolt was not long enough when I tried to assemble it with the included parts, as if it was basically for a recent model.
Therefore, I used the previous Boltetc. It is working fine.
View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ninja, KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, HONDA , DUCATI Late 999, DUCATI 749, BMW S1000RR, BMW S1000R
Used on GSX-R125
Installation is easy with the included bolt.
Unfortunately, when I lifted up on the STAND, the black color on the surface of the STAND contact area peeled off in one shot.
I don't mind that it's scratchy, but I probably should have gone with Silver.
View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
It also makes a good Accent.
I chose Gold to match the color of the Outer tube of the Front fork, and I am satisfied with the good Accent.
The size is larger than I expected and it has a strong presence.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ZX10R, KAWASAKI ZX6R, KAWASAKI NINJA400, BMW S1000R, BMW S1000RR, DUCATI 749, DUCATI Late 999, HONDA , KAWASAKI ninja, KAWASAKI Ninja 1000SX, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), SUZUKI , TRIUMPH DAYTONA675
Buy for V receiver
I installed this for jtrip's V receiver.
There are many other products of this kind, but I chose this one because it is made by jtrip and I trust them.
View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI ninja, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Just right for the look Accent!
It's just perfect for PetitCustom. View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ninja, KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, HONDA , DUCATI Late 999, DUCATI 749, BMW S1000RR, BMW S1000R
It's good for a little Accent.
Not only does it look Accent, but it also works well with JTrip's STAND and feels great to use. View detail
Fits: KAWASAKI Z1000, KAWASAKI Ninja400, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-12, KAWASAKI ZX-10R, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja650, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI , KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI Z250
Processing is Beauty
I bought this product to use with Maintenance Stand, Anodized will be peeled off when I use Maintenance Stand, but this is not a problem. I am very satisfied with the finish. But the color is resin. View detail
It's easy and easy to use.
I used this product to adjust the balance of Aluminum Wheel. You can cut it to your favorite weight and the adhesion is so strong that you don't have to worry about it peeling off. View detail
Fits: DUCATI Panigale 899., DUCATI MONSTER S2821, TRIUMPH DAYTONA675, YAMAHA , APRILIA RSV1000 Series, APRILIA RS125, APRILIA RS250, APRILIA SL750
That's enough
I've used it on several motorcycles
So far it hasn't been an inconvenience; in R6, it protected my Swing Arm when I fell down
Some of them have been used for more than 10 years, but the color fading is about ↑ images
I think he has it rather well
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
I have no complaints about the brand I trust
I have a Maintenance Stand, so I didn't have a hook, so I bought it It is the same manufacturer as the Maintenance Stand, so it was possible to use it without a problem View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ninja, KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, HONDA , DUCATI Late 999, DUCATI 749, BMW S1000RR, BMW S1000R
I think it's good.
NINJA650 (2018) I am attaching. Paint may be attached to the Screw hole on the Motorcycle side and it may be difficult to screw this product. I think that it is good to take lightly with Tap. View detail
Fits: YAMAHA , DUCATI MONSTER S2821, TRIUMPH DAYTONA675, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA SL750, APRILIA RS125, APRILIA RS250, YAMAHA , TRIUMPH Daytona 675, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750, DUCATI Panigale 899, DUCATI Monster 821, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750
As you intended
【What made you decide the purchase?】
It is hard to come off even if STANDVHook is applied. Large There is a good return.
A certain degree of clearance can be secured between Swingarm and VHook.
【How was it actually used?】
Appearance color (Gold) I like matches with other parts, so I like the appearance.
Actually applying STAND is a place where there is no choice but to get scratches in the Anodized section,
Basically only the lower side is hurt, so I do not mind seeing from the side.
【Was it difficult to install? (Hard parts case)】
Originally I cut the screw with the Tap of M6, so I could easily install it.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Because it is only tightening in accordance with the screw, there is no special hang.
As Aluminum Swingarm, be careful with tightening Torque.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Not subject to evaluation
[Is there anything I was disappointed about?]
Dimensions were also aimed, so it is not particularly.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Because it is an Anodized product, I think that there is no choice but to fade, but thank you for being more faded.
【Have you compared items?】
MORIWAKIEngineerRing Stand hook roller
[Others]
I was using the above MORIWAKIEngineerRing's Stand hook roller, but I was concerned that the return part was Small, but this Size is safe.
View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
It's a bit small, I can not..
I purchased it and purchased it like another car model because I liked it. Because the vehicle is Large, I feel a little Small a little, and I can see a little unreliable. There is no problem at all when actually trying. View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
To accompany VHook
Select Silver according to the color of Swingarm
As for the installation, since the receiving side Screw on the Swingarm side is a little behind, we recommend using the color of the attached resin.
I was wondering if the place where VHook would take was going to be scraped, but I was not bothered.
Even if it is a functional part, it is not so conspicuous, it was good
View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF1000, YAMAHA YZF 750R, YAMAHA YZF-R7, YAMAHA TZR250, YAMAHA FZR400, YAMAHA TRX850, YAMAHA , YAMAHA , YAMAHA FZR400, YAMAHA TRX850, YAMAHA YZF 750R, YAMAHA YZF-R7, YAMAHA YZF1000, YAMAHA YZF750SP, YAMAHA FZR400, YAMAHA TRX850, YAMAHA YZF 750R, YAMAHA YZF-R7, YAMAHA YZF1000
Maintenance essential Items
It is an indispensable Items to put Racing Stand of Hook type. Moreover, I think that it has sufficient effect also for Dress-up purpose. Of course I am Main, but the former is Main, but one of the features that the latter also can not throw away.
Actually I wanted a color of Titanium line to match the color of Frame, but because I do not have Lineup, I made Gold as an intention to match some Anodized colors such as Adjuster and Sprocket of Front fork, but it is too beautiful Gold Because it floated, I immersed it in PipeGel and dropped Anodized.
As a result, it is a solid color which is neither Silver anodized nor Titanium alumite, it is a legitimate injury, but I like it very much. Thinking it is a thing that scratches immediately as soon as you hook Hook. For Color Anodized Aluminum, it may be called corrosion resistance, but it seems good even if Solid Lineup is done.
☆ I did not have a favorite color, but it's one less, but usability is necessary and enough.
View detail