Reviews
For DIYCustom.
This is an unusual Size and will be useful for DIYCustomers. View detail
be extremely thorough, focusing on even the finest of details
The mounting hole on the bracket side is an ellipse, so it can be done haphazardly.
In this case, it was used to install MONKEY's Rear Fender.
View detail
LED bulbs installed behind the Number
It is a solid making
Rust will not occur.
The LED bulb is mounted on the Screw behind the Number.
View detail
To DJEBEL.
The rubber of the gasoline cap of DF200 DJEBEL was worn out, so we cut out this rubber in a circle and installed it. View detail
Smaller than expected.
I bought this to put a bar on my φ28.6 Handlebar. The moment I saw it. I thought it was too small, but when I installed it, it was just right! I used the tap as a drill hole. View detail
Beautiful laser cut
I am building a custom vehicle with a Motorcycle called Yamaha's XV750E.
We are in the process of completely rebuilding the seat rail.
We are working with steel welding, but it is very time consuming to start cutting out even the smallest brackets.
Also, since we cut them out by hand, we cannot by any means make "exactly the same thing".
The savior in this situation is the Weld Bracket.
2%er also offers a similar Weld Bracket, but this time I went with GOODS' because I liked the Steel and the dimensions were just right.
We do not have a TIG welding environment, so it is inevitably Steel.
There is a lot of welding with Pipe, but I think the thickness is just right and there is little chance of failure.
Since they are still too thin, they may have holes or be distorted if they are too thin together;
This time, thanks to the WELD system parts by GOODS, we were able to shorten the work time considerably.
I would use it again next time.
View detail
under consideration
It is not a MONKEY. 。 I bought the company's Oil catch but bought it to study the installation method. I am still considering it. View detail
A sturdy (and a little difficult to process) steel Bracket.
I purchased this product to make my own ETC storage Case. If I had to explain in one word Sturdy steel plate Bracket" is
It was harder than I had imagined and difficult to process, but it was tolerable because it is supposed to be durable.
The paint job is also very high quality for the price, and I think it is a good bracket.
View detail
It's a thin rubber board." It's easy to cut with Cutter or Scissors.
As per the Title, it can be easily processed with Scissors or Cutter.
It has many uses, such as anti-vibration measures for Motorcycle or under a tool box.
It's reasonably priced and it's a RECOMMENDATION!!!
View detail
I wish the holes were a little less closely spaced.
The hole spacing is 20mm. I wanted something with a narrower hole spacing and this thickness.
The strength is there due to its thickness.
View detail
Thin and soft.
It is thin, so it is a little soft, and when you put pressure on it with your finger, it bends just a little bit.
There are some places where there is nothing but a lot of holes, but you can't go for strength.
I think it is quite easy to use.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X
Required for Universal Product
Used when converting WR250X to Number Plate and changing the Front Fender to another company's product.
I wondered if it was necessary, but Universal Product would not come on without it.
A Front Fender dedicated to WR250X may not be necessary.
View detail
The quality is solid and sturdy.
We started using the system in April 2017 and have been using it for 6.5 years.
I am only a little concerned about retrofitted parts, so I inspect them only occasionally on the side of something.
Obviously, ・・・・ no problem. I will ask them to keep up the good work.
View detail
K-CON Universal Bracket
About quality and texture It's finished in black, so the quality is good About the feeling of use I couldn't choose a hole, but it was fitted well Products to buy together anything blaket Difficulty of installation easy Cost performance and comparison with other products It's a good bracket for the price About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I had to move because I didn't like the location of the winker even though I had an ape100 fenderless kit I chose this product and I was able to complete it View detail
Used for fixing Carrier and Mounting Base without modification
The CB400SF is equipped with DAYTONA's Multi Wing Carrier, which is used as a bracket to fix the Carrier and the mounting base.
As a result, I am satisfied with the normal use of the product.
However, similar products are sometimes cheaper to buy at Home center.
It's Stainless, so I hope it won't rust (laughs).
View detail
AGUSTA
I purchased this product to prevent Cowl from flapping. I am glad that it is more firmly than I expected. I was able to adjust the length and widen the hole diameter to about Large. It is a pity that Red and Blue are no longer sold. View detail
Fits: SUZUKI GSX1000S KATANA (KATANA), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX750 KATANA
You were right to buy it!
I purchased this product to install ETCBody inside Cowl. I was able to install it in my KATANA without any modification. I am very satisfied! View detail
Good Bracket.
I used it to install the ETC Sensor in the Cowl. That's a handy Bracket! View detail
Good
The quality is excellent. It is convenient to collect key switch box and choke cable in one place. And the neck of the motorcycle has been simplified, so it feels much better View detail
Used as Bracket for Reservoir Tank
[How is it used?
Brake masterCylinder was replaced with a RadialPump, which is used as the holding Bracket for the reservoir Tank.
Was the one you received as per Image?
Generally as per Image.
However, detailed dimensions are not disclosed, so be careful when purchasing.
(The arms were shorter than expected.)
Was the installation difficult?
This Clamp itself is the Quantity:It is not so difficult as just tightening the 2pc Bolt.
Instruction Manual is also included, so you should have no trouble installing it.
How was your experience with it?
The handlebar clamp is very thin, which makes me a little nervous, but it is securely fastened. The clamp is so thin that it can be fixed even in a small gap.
The Bolt hole at the end of the arm is penetrating so it can be fastened from either side.
The ability to fine-tune the position is unobtrusively convenient.
[Was there anything that disappointed you?
None in particular.
I thought it would be better to have the DAYTONA engraving in the same color as the Body so that it would not stand out.
View detail