Reviews
Regular Spoke Tension Checks.
It's been 2 years since I bought an OffRoad racer called KLX230R. I compete in the G650 XCOUNTRYRace once or twice a year, and sometimes go on Course runs. And I noticed that the Rear Spoke is off by 1 pc and quite a few of them are loose. I bought a Spoke wrench, which fits my KLX230R. It seems to be rigid and I think it will be fine to use in the future. View detail
simple is the best
Used for Rim assembly of Spoke wheel.
I assembled Stainless Spoke and Wide Rim on SR400's Rear wheel.
In the beginning, I was turning with Driver from the head of Nipple, but it is difficult to multiply Torque appropriately.
In this respect, the Spoke wrench can be turned firmly.
Also, after the tires are assembled, they cannot be retightened no matter how hard we try.
Especially in my case, I have installed OUTEX's Tube Eliminate Kit, so even with Tire removed Timing can no longer Access to Nipple's head.
If you ride a Motorcycle with Spoke wheel, I think it is essential equipment.
It is also easy to use.
Even and odd numbered Nipples with Both Sides can be used for Nipples of various numbered Nipples.
Perhaps not just CUBs, but MopedSize thin nipples to Big bike and Motocrosser thick nipples can also be used.
Unless you have an abnormal NippleSize, you can handle it with just one of these, so in a sense, it will last a lifetime.
It is not expensive, but it is small and not used often, so I would like to be careful not to lose it.
View detail
I ordered it for use on a newly purchased vehicle.
While purchasing and installing tubeless wheels on a newly purchased vehicle CT125, tighten the spokes during initial break-in.
Purchased for a purpose. different sizes and torques
It can be adjusted and tightened, but the range of torque is different from other products, so it is suitable for use on spoked wheels for motorcycles.
I bought it because it has the best range and I use it well
there is. -------------------------------------------------- -------- Tighten the spokes when the newly purchased vehicle CT125 is purchased and mounted and mounted. Purchased for purposes. Various size and talk It can be adjusted and fastened. It has the best range, so I bought it and used it well there is. Powered by Google Translator
View detail
Kitaco Spoke Wrench
I bought this Kitaco spoke wrench tool with intention of tightening the spokes on my 1987 TW200.TDub front and rear spoke nipples needed size is 5mm.This spoke wrench has 6 sizes.Number #3 slot direct fit for the TDub OEM spoke nipples.This tool was able to tighten the spokes on both wheels.. The wrench is pretty easy to use,little heavy but lightweight and very easy to carry on.Four years back I purchased Dachi stainless steel spokes set from webike for the front wheel of my bike.Dachi made spoke nipples a tiny bit differently than factory spokes set and So I can Use Number #6 slot Instead of Number #3 slot. if you are a do it your-selfer like me this tool works just fine.anyone want to lace brand new spokes into a wheel or plan on loosely snugging up all the spokes before having the wheel trued,this spoke wrench might do the trick.I also get enough leverage since I'm only tweaking the spoke a half to a quarter turn at a time.I think this wrench well made of quality steel.when you touch this product you can feel it.this time took only 3days to received the package after dispatch from japan.Exceptional Service.Thanks A lot WEBIKE.Highly Recommended !!! View detail
Must-have for regular spoke maintenance
Checking and tightening your spokes is important yet frequently neglected. Throw this in your cart and check the spokes before every ride for your safety and the longevity of your wheels.Finally caught these in stock. There is a reason for this demand. It fits any spoke you may have without having to change tips..a great tool for your toolbox. works pretty well and is small enough to keep in your pack.not as good as designated sized spoke tools, but it works and is well built. View detail
TGRNippleTorque wrench
It fits Nipple and is very easy to use. View detail
Quantity:It says "Set" but it is 1 pc.
[How is it used?
I purchased this for SpokeMaintenance on my SEROW225.
A friend of mine told me how convenient it was.
Was the one you received as per Image?
The Image is a good size and is more massive than I had expected. It is a good size that fits comfortably in your hand.
How was your experience with it?
It's 1 pc and supports MultiSize. 'Um, how many millimeters is this?' Checks like this are unnecessary.
The work is well done because the Size is heavy and comfortable in the hand.
And when I checked the condition of the Spoke, it turned out to be quite damaged. It is time to replace it....
[Points to note]
Because of the multi size, if the angle to the spoke edge gapes a little, the top of one size can be used. If this happens, a strong stress will be applied to the edge of the spike, which may cause the spike to be snagged. Make sure that the size of the spike is properly matched before you work on it.
The product Title is Wrench set." but it is 1 pc.
How did it compare to other products?
Since this is the first time, no comparison has been made.
View detail
Use it as a bean.
[How is it used?
Purchased for Spoke maintenance.
Was the one you received as per Image?
It is a small size as shown in the picture.
How was your experience with it?
It can be used in a variety of sizes and is small, so it doesn't take up too much space in the tool box, which is great!
[Points to note]
Not particularly.
How did it compare to other products?
Thank God, because everything else is so expensive!
View detail
Something that will last.
It is Wrench of the first purchase in life. Because there is not the thing which changes so often, I purchased it though it is Overspecifications in my repair Skillana.
It's small, but the weight is comfortable.
I have been driving a Spoke car for many years, but I was not careless about the condition of Spoke. From now on, I will MASTER the Spoke adjustment by using this Wrench,.
View detail
To reupholster Spoke
I bought this tool to replace Spoke of CUB series WheelCB50. The Nipple was a little rusty and I used Wire brushetc. to remove the rust lightly and checked which Size of the tool was suitable. The tool is compatible with 6 types of Spoke nipple. There is no spanner for Nipple and the tool is thick enough to hold the Nipple firmly. I was able to use it for fine tuning the balance of the wheel. View detail
Tool shop tools are good.
I was cleaning the other day and bought a Nipple wrench because there was Rose stickiness in the Spoke tension and it was bothering me.
I've never adjusted the tension, but I judged it by the sound I made when I played the Spoke.
Size is easy to work with.
There is also a 10mm grip width, so you can get a tighter grip on Quantity:If you set it, it won't be as sloppy as a cheap tool.
As I said, tools made by a toolmaker are easy to use.
Front and rear tensioning was different in 3 to 4 wheels each, but just to make sure, there was no change in wheel runout in width direction and circumferential direction.
The cost performance may not look high, but the price is fair considering that it can work reliably, doesn't hurt the opponent and doesn't accumulate stress.
View detail
Off to Car Maintenance
Bought it to adjust the Spoke nipple. tapped the Spoke 1 pc1 pc and it sounded dull I tightened up the Nipple, the size is as described in the service manual (5.8×6.1mm). So, I was able to adjust it without licking It's still a special tool
It's a little expensive, but I think it will last a lifetime
View detail
Off Travel Many essentials of Motorcycle
Spoke may be loose unprecedentedly when there are a lot of off-road driving, so if you get a good sound when you hit it occasionally ok. If there is a dull sound out Spoke, let's tighten it a little. Too much to overcome Balance so much. Because it always makes a nail when you do with a substitute item, you need a special Wrench. This also fits my new dTRACKER 125. View detail
Rim exchange with CUB - One who adjusts 1 pc Tool that you want to keep
【What made you decide the purchase?】
In exchange of iron Rim of SUPER CUB 110 to Aluminum rims, DRC_PRO Spoke Wrench which I had before had each Size not matching and I was looking for it.
It is almost the same as the special tool of Service manual
I purchased it because Size seemed to fit.
* It seems that the special tool is currently undecided on delivery date.
can not buy it.
【How was it actually used?】
I exchange Rim of two CUB owned like every year, but I can use it normally.
In the case of CUB, this tool is # 5 at the far end (Rear) # 6 (Front) It is possible to use the most force because it can be used in, so you can not turn Nipple at an odd position.
【Mounting was difficult?】
Used Spoke - For Nipple, Rustetc. Fixation by - Sometimes it does not turn with this tool due to Plating peeling.
→ Nipple tanning etc.
It is recommended to use tools dedicated to the manufacturer.
【Please tell me the installation point and hang】
In the case of CUB, the error from the special tool is Front 0. 2mmRear0. As 1 mm Size is Small, if Nipple gradually becomes thinner
It is not recommended for those seeking precision.
Since I will tilt Nipple if I do not adjust it firmly in the back, I use it with particular care.
Painted Rim because the tool itself stands Edge - People who are Anodized should be chamfered all around the file with File and prevent peeling due to inadvertent contact.
[Is there anything I was disappointed about?]
Lineup was only 1 pc at the time of purchase in 2011. Currently Webike Garageetc. It is enviable because it can be purchased inexpensively.
It is hard to be painful so it is the next purchase
When will it become - - -.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Because it is notation of Size by call number
Actually I want to know how many mm.
I'd like to have a little chamfering.
Even with a slight price rise Rubberetc Grip. I want you to coat with.
【Have you compared items?】
DRC PRO Spoke Wrench
[Others]
I want the handling of manufacturer's OEM special tool for the first time.
View detail
It is a tool indispensable to bolting of a Spoke nipple. It is easy to treat the main part with wall thickness, and it corresponds to almost all the diameter of Spokes by this one than expected. structure is as it does not become a little cheape
It is a tool indispensable to bolting of a Spoke nipple.
It is easy to treat the
main part with wall thickness, and it corresponds to almost all the diameter of Spokes by this one than expected.
structure is as it does not become a little cheaper since it is simple.
View detail