Reviews
Same shape as OEM Product
This is the same as the TomClip used in the SPACY100. (Size/Shape)
Material:Because it is Plastic, it will be missing at the nail in a few years.
But how can something like this cost more than 100 yen (one piece)?
I think it's expensive, but I can't find a cheaper alternative, so I have no choice but to buy it.
View detail
As a spare part!
I used it on my GSX-R1000R at the Chain Cover!
I think Rivet is one to have in reserve!
View detail
Unchanging quality
This is the same quality as the NORMAL parts and is useful to keep in stock in case of damage or loss. The grip is easy to remove and install with a single push, and can be removed without tools as long as there is no sand or other debris caught in the grip. View detail
To Cowl.
I used it to fix Cowl.
It can be used if the hole diameter and depth match.
View detail
Refresh with ease!
It's been 26 years since My Monkey came to Japan with a new car.
I'm getting tired here and there.
On the Net, I happened to find this product, and since everyone's impressions were favorable, I bought it immediately.
Work with Kan Tan!
If you remove the Seat, you can replace it with just a Gold hammer and Radio pliers.
− working procedure
(1) Remove the Seat and tap the Rivet with a Gold hammer from the inside about 10 times.
(2) When you push Rivet from the outside, the clamping Gold is floating, so you can use Radio pliers to pry the clamping Gold inward little by little. (Rivet is still held from the outside.)
(3) A new Rivet was inserted into the existing hole from the outside.
(4) Push in the new clasp Gold from the inside using your fingertips.
Push it all the way down to the base, wrapping the excess leather around the Seat!
(5) Repeat 11 places. (In the case of a '95 12 VMONKEY)
→ finished!
It looks perfect, it's Polished!
Well, it's a world of self-satisfaction.
By the way, there will be 8 pairs left over for the 20-pack.
I can't help it because of Universal Product….
View detail
It's handy to have as a spare.
Push rivets are often used in Yamaha and SEA BASS, but they always deteriorate over time.
Parts are often broken when removing and removing them, or they become too habitual and difficult to reuse.
It's not expensive and I try to use a new one when it goes bad, but KITACO releases them by Manufacturer, which is very helpful.
View detail
They were the wrong size!
Trial and error for Grom's Custom It's not easy to get used to, but I'm enjoying learning a lot of things I'm not used to it, but I'm enjoying learning a lot of things I do this with admiration
However, due to the inexperience of the work, we often lose sight of the small parts and break them When removing the exterior of the grommets, some of the material:You have to remove the plastic grommet (like a Rivet) At first I didn't know how to remove it, and when you push the center part with a thin stick, the whole thing comes out But at this time, I had too much momentum, and the plastic part in the center of the plastic part flew somewhere
So I've been looking for the same part for a long time, but I couldn't find it, and finally I found it! I was surprised that KITACO prepared such a small item for me What a conscientious company! However, the parts I received are the same shape and function, but the size is different (for groms) It was much thicker than the original We-Big's web site alone has a lot of different shapes and sizes, and I'm not sure which ones fit I don't know if this is the best for HONDA I'd really appreciate it if there was a Guide like that, but for such a small part It's not easy to prepare Large strange to prepare
View detail
I can trust.. Mounting Easy
It will fit perfectly as though it is an OEM. I am satisfied with the finish being Beauty. Seat is now like a brand new. It was good as it is the same as OEM. View detail
On COLLEDA SPORT
Seat's Rivet was rusty so I exchanged it, I decided to decorate and half a fixed half rather than stop it. CRing is easy to wear, easy to wear, the head is also beautiful and good. View detail
I think whether it is an OEM Same Product
The plastic part has been removed many times
I will crack now..
It is safe to have several as Spare
Those of Size are not sold at Home center
View detail
Purchase again for Stock
With this area Rivet, play is easy to come out when the three-prong is opened when you remove it like a photo.
Cowl's backlash was checked and all the open places were exchanged and became chitin, stocks were gone, so we ordered additional order.
View detail
I tried to exchange regularly.
Purchase Size of SEA BASS car type as we remove Cowl.
The place where the Rivet's three-prongs had opened had a backlash in the combination of Cowl, but when it is brand-new it will become exactly fit and it feels good.
It is not good maintainability to assemble Rivet which is still open ... I can not taste the final "maintenance completion feeling", so I added it to the List of Parts to prepare before removing Cowl.
View detail
Knkikaku
Yes, simple work can do many measurements. Yes many versions Meet the needs of people who are not comfortable to work hard. View detail
DAYTONADAYTONA:Rivet set
W650 【POSH FaithPosh Face : We installed Rivet on W1 Type Seat】. The feeling is very good, but it is better not to have Silver's Piping, is not it? Because it is a Low seat, it seems better if the person who attached the Rivet to the Seat of the W650 OEM will get a sense of VINTAGE ??? View detail
Push rivet
【WebikeMonitor】
I replaced it because it cracks with aged deterioration.
It is recommended because it is cheaper than OEMParts.
We are collecting orders and putting in inventory of Parts
View detail
Purchase for replacement
Originally attached Rivet was broken leg while removing or attaching Cowl for servicing. I bought it for replacement, but Sizeetc. It was same and compatible. Durability is now confirmed. View detail
It is Rivet for Yamaha - -
When car wash of ZZr 1400 I noticed that Push rivet at the lower Left Side of Upper Cowl is gone. I planned to purchase OEM Product as soon as possible at a nearby shop but I found that PushBolt for each Manufacturer is out from KITACO and purchased it. Originally for KAWASAKI's thing 7 Pi thickness was the thinnest Size so I thought this was fine, but the shape and thickness did not match when I actually wore it.
I removed the PushBolt of Right Side and checked it, the shape was slightly different but the one with the thickness of 6 pie for Yamaha fitted well. It was a story of the shop and it was a Parts for Motorcycle for FOR JAPAN MODEL, so it seems there is a size that does not fit if it is a re-imported car.
I bought the other side Push rivet at the time of purchase and it was earlier if I looked for the same Size but it took twice the time I thought it would fit from the number display of Parts List.
This time, for KAWASAKI 6 Pie Size did not appear, so I think that I could substitute for Yamaha. From now on, it will be helpful if you get Push rivet for reverse car.
View detail
I have looking for these Trim Clip from ebay & amazon over a year but there are non at all. Thanks to Webike. These Trim Clip are exactly what I need for my Honda Scooter.
I have looking for these Trim Clip from ebay & amazon over a year but there are non at all. Thanks to Webike. These Trim Clip are exactly what I need for my Honda Scooter. View detail
It was used as a substitute of the Clip for Cowl fixation of Honda VTR1000F (a Honda brand-name-parts 90683-GR1-003 Clip Body cover or 90683-MBW-003 Clip Body).While turning Honda brand-name parts with a Driver and removing, although desorption became
It was used as a substitute of the Clip for Cowl fixation of Honda VTR1000F (a Honda brand-name-parts 90683-GR1-003 Clip Body cover or 90683-MBW-003 Clip Body).While turning
Honda brand-name parts with a Driver and removing, although desorption became easy since this product separated when pushing in the central core, and the thread part might become foolish and might idle in brand-name parts, this does not have such a thing, either and user-friendliness is also good.
View detail
Although it is a serious, convenient Push rivet whose attachment and detachment are possible in an One-touch -- If it uses for a long time since construction material is a Plastic, it stops dividing and becoming useful. the Push rivet stops
Although it is a serious, convenient Push rivet whose attachment and detachment are possible in an One-touch -- If it uses for a long time since
construction material is a Plastic, it stops dividing and becoming useful.
the
Push rivet stops a Cowl, a Cover, etc. of a SKYWAVE -- alike -- if it is divided since a nail will break if it is used mostly, and it tries to use about, removing several times, he is trying to exchange
Merit well direction it considered the
Push rivet as consumable goods (^u^) Since a price is also cheap, the Push rivet (three-piece Set) made from the
KITACO.
It will purchase, if it sees in Schopp, and he is trying to always stock several pieces in a house (^-^) The
Push rivets are multi-use parts found useful in the Maintenance groups of removing Cowls well, in order to maintain.
View detail