Reviews
Satisfied
I bought it because I moved to a new house and my parking space was getting smaller. I use it on my ZEPHYR750. I use it on my ZEPHYR750 and recommend it to short women who are not strong to practice many times to get the hang of it. View detail
Enough for chain cleaning/adjustment and rear wheel washing.
This type of roller stand has been around for a long time, but the weight is a little heavy and the rubber cushion on the back of the stand is
They were all peeled off with a single blow.
The body of the DAYTONA model is light and the position of the rollers can be easily changed according to the engine displacement volume of the motorcycle.
You can use from Mini bike to Liter machine.
I used to have a J-TRIP Stand for Beginner, but it took up a lot of space when not in use.
It gets progressively more difficult to clean up.
It's easy to store and it doesn't take up much space if you lay it down after use.
For example, when you put the rear wheel on the roller stand, you should put it slightly left of the center.
Let's aim at it and put it on at once.
After installing the front brake lever, tie the front brake lever with rubber or anything else to lock it.
When you turn the rear tire, the tire will shift to the right, so it is better to put the tire on the left.
I think it's easy to work with.
View detail
Easier to use than I thought.
I bought this for ChainMaintenance on my VTR250.
Maybe it's because the car is on the lighter side, but I didn't have to put that much effort into turning the Tire to get it to turn.
Body is the weight that can be held with one hand, and it is the impression that it is possible to put in and out easily because the place where it puts it is not troubled that much.
When you adjust the width of the Roller and Roller, you can remove it by pushing in the protruding part of the Roller, but I was able to remove it easily without putting any effort.
I worked with it on a flat Concrete and it didn't shift position.
To be honest, I didn't expect so much before using it, but it was more convenient and easy to handle than I expected. But if you have a large or heavy motorcycle, it may not be as stable as you expect.
View detail
Car models where the rear stand cannot be used
I was surprised at how durable it was.
I bought it for the maintenance of the rear area because the rear stand cannot be used in my car.
It lifts without a problem.
However, the lever whist is good for hanging.
View detail
For Tire Cleaning
I bought it to clean the front tire when cleaning the motorcycle.
When you put the front tire on the WheelRoller, if you don't put the front tire on the WheelRoller in the middle of the wheel parallel to the front tire, when you turn the front tire, it will come off from the Rollers.
I have to start over from the beginning. It takes experience, but no matter how many times I try, it's hard to get the pit parallel and right in the middle.
Turning the Tire is awkward and requires a lot of force.
If you do not use the Rear stand, the Motorcycle is leaning and is dangerous.
I always use it for cleaning after Touring, I use it for a long time and it is durable.
View detail
Purchased for Chain cleaning
[How is it used?
I bought this to make things easier for Chain cleaning.
I also own Racing Stand, but because there was anxiety in one person when I put Racing Stand on CBR because there were few parts to hold and support, I decided on the product here which only needs to be pushed and put on.
Was the one you received as per Image?
The texture is heavy and sturdy as it has a load capacity of up to 200kg.
The rollers can be adjusted to three levels to suit the tire diameter.
For 17in. it was just right in the middle.
There is a slight gurgle in the Roller's rotation, and it would be nice if it rotated more smoothly.
There was no particular problem in use though I thought that the usable tire width was Limit before purchase because it was said that it was up to 200mm.
How was your experience with it?
When turning the Tire, it feels like it takes a little effort with a vehicle weighing about 200kg.
This is a difficult one as it will vary from vehicle to vehicle.
The price is cheap, and it is a product that can be used enough if it is only Chain cleaning and Wheel cleaning.
It's more compact than the Racing Stand (approx. 345mm long, 210mm wide and 40mm high) so it takes up less space to store.
[Points to note]
When I turn the Tire, the bike is a little bit wobbly, so I use Elastic band etc. to make the brake work.
How did it compare to other products?
I don't know because I haven't compared them.
View detail
Easy to use!
I used it on my 177cc motorcycle which weighs 115kg and it did not move the gap when I put the vehicle on it and I was able to handle the rear wheel idling easily.
However, it may take a little effort to spin the rear wheel if the vehicle is at the weight limit.
It is a good idea to occasionally lubricate the roller bearings. A good product should be used for a long time.
View detail
GSX1300R HAYABUSA is Large strong even if it hangs?
I thought I would use a single pipe to replace the stem bearing on my GSX1300R Hayabusa, but I thought it would be too much work to assemble and disassemble, so I bought this product.
The maximum load capacity is 180kg, so is the GSX1300R HAYABUSA, which weighs almost 270kg, large and strong? I thought that I could go because I only hang the front. (Please do so at your own risk.)
Some people use a Ratchet Tie downBelt to hang it, but when you take it down, it falls all at once, so I recommend a lightweight Lever whist.
View detail
It takes more strength than you think to turn it.
I bought a similar Roller stand at a certain cheap tool store and it did not turn by hand at all.
I trusted Brand and bought this one.
It's a 900cc motorcycle, but it takes more power to turn the tire than I expected. It is much better than the thing of the cheap tool store, but ChainMaintenance is quite Large strange. It seems to be inevitable with this type.
If you have a place to store it, it's much better to buy a Maintenance Stand. It's for people who don't have storage space.
View detail
I want to make chain refueling easier since there is no main stand.
I'm not sure if it's because I'm not used to it or because it's too heavy to turn the tire. View detail
Unable to purchase with Bar code search
I tried to buy it using the Bar code search, but the search results showed The sale is now closed. I thought the Bar code had been changed, but when the product arrived, the Bar code was the same and the search results were still The sale is over. It was.
The product will be evaluated after use.
View detail
Not suitable for heavy vehicles and vehicles with large tire contact area.
* The video is a recent driving scene with my car FZr1000 3GM5.
[How is it used?
Cleaning and maintenance of wheel.
Was the one you received as per Image?
It was as per Image.
How was your experience with it?
As shown in the title, it is not suitable for heavy vehicles and vehicles with large ground contact area of tire.
[Points to note]
Even if you use it, I think it is up to 250cc class weight car body.
How did it compare to other products?
Chain lubrication, etc., is not necessary for a heavy body. Swingarm Lift Stand is better to use.
It can only be used for cleaning the wheel.
Other items that would be helpful
Installation Point or hang/It is better to lay a square of about 3 cm in STAND.
Items to buy together/Square timber.
Opinions and requests to Manufacturer/It should be indicated that it is difficult to use for chain lubrication of the rear wheel.
View detail
Ease of use is as good as it looks. How is the texture compared to the front and rear STAND?
I have a similar STAND from UNIT.
I chose this one because the storage Size is Large threshold.
The fact that single tubes are sold in 0.5m increments is just right for the Motorcycle.
1.5m×Quantity:I used 2pc and 1m ready-made as it is.
We have a Large Diameter Pipe cutter, so we can process as much as we want.
Cut the height direction a little more and make it Compact.
It looks like you might want to increase your stability.
STAND has a load capacity of up to 500kg.
It is very sturdy, large and heavy.
However, if the weight is not applied vertically, it will not be very stable structurally.
In the case of high weight, it will have to be used with great care.
The ease of use really is as impressive as the description and appearance.
The point that concerns me is that the insertion hole may be too large for the diameter of the single pipe, and
We use OthersRearMaintenance Standetc. but the quality of the paint is poor. (Weak) I have a feeling.
The availability seems to be poor compared to the front and rear Maintenance Stand, and
I wonder if they're cutting corners because there isn't much demand. I suspect that they are.
Having said that, Ideas is a good product and very helpful.
View detail
The slide is useless.
The non-slip surface on the back of the body comes off immediately. is coming off immediately.
Since it supports a heavy object, please make it more solid.
If the body is dislodged when it is placed on the Roller, the RollerBody will not remain stationary and the
If there is no non-slip surface, the genus Gold part rubs against the ground and scratches it.
I'm just going to do some Chain cleaning.
Would a Type that lifts the car body be better to work with?
I feel like I can work better when the wheels are turning.
This one is more stable, though.
View detail
MaintenanceRoller
I was looking for a rear stand.
It's been working great for me.
View detail
For motorcycles that don't have a center stand.
Useful for cleaning the rear wheel and Drive chain, reducing chain cleaning and grease up maintenance time, and is a must-have item for any motorcycle without a center stand. View detail
Non-slip bottom Gap.
I bought it to take care of the Chain and front and rear wheels.
Until now, I had to jack-up the car with the Side Stand up to maintain it, but with this, it is very easy to just put either Tire on the car.
But when you don't do it with both hands to turn the Tire, it's heavy and as other people's imprints, the Tire that you turn will Gap to the other side of the Side Stand. I think it is Large sturdy as long as the ground is not too slippery because there was not.
View detail
Exactly for motorcycles that don't have a Center Stand!
ChainMaintenance on a motorcycle without a Center Stand is quite a hassle, but this product makes chain maintenance much easier! I wish I had purchased this sooner. Recommended. View detail
It's so much easier.
The turnaround in my small home parking space is now 1/1th the size of a parking space. We have a W800 and it travels lightly.
However, it was improved and GizaGiza seems to have increased, but there are many things that do not escape from Tire, so we decided to use Minus.
Am I doing something wrong?
View detail
Useful for changing directions on a Motorcycle
I've been curious about it for a while, but I was hesitant to buy it because the price was too high.
Then I got an email about the Point expiry, so I ordered it.
Although the old one was cheaper, I bought the new one because I thought it would be more convenient to have a part to engage the Side Stand later, even if it was a little expensive.
All you have to do is bite on the Side Stand and Rear tire (or Front tire), step on it, and push or pull it.
If there are dents in the pavement, etc., it won't move.
Also, the handles and other Edge parts of the Gold genus are still firmly intact, so I had two injuries when I touched them somewhat randomly.
In that aspect, it's Minus, but it's certainly useful.
I have been using the Transporter for the Sambar, and recently, due to the lengthening of the Motorcycle, it has become necessary to stack it diagonally, and I thought it would be easier if I used the Motorcycle Mover, but as you can see in the picture, the sub-battery box and other parts get in the way, but it made moving it easier.
A Transporter that is fully usable and floorboarded with no sub-battery etc. would be much easier to utilize.
Added on Nov. 1, 2020
The handle came off, so I contacted the Manufacturer and they fixed it exactly.
Support also seems to be safe.
View detail