Reviews
Expanded plug selection with KITACOPlug cap
The terminal shape of the Spark plug is divided into Large and "Integrated" When "Separable type" There are two types Generally speaking, Motorcycle Plug cap is a detached Nut (The one without Nut from the beginning is called "Screw type" and should be classified into 3 types There are also If you make that kind of division, the separated type is called Screw type if you remove the Nut) Most of them are compatible with the Therefore, even if you try to freely choose the performance and characteristics of the Plug Not in one piece That's what I'm talking about Since this KITACO's 751-0500300 is compatible with an integrated model, you can use all It becomes possible to support the Plug, and the choice is much wider However, in my case, rather than wanting to stick to the plug performance and characteristics, I have a dis BP6 from Mazdafor Vehicle, which I bought in large quantities at $1.50 a bottle at CountShop I don't want to waste ES, which is the most Large reason for the Plug cap exchange KITACO 751-0500300 is the best choice for those who are particular about the performance and characteristics of the Plug I would like to recommend it Impression with the hope that you will find it helpful in that sense
View detail
NGKLogo..
I bought it believing it would be better than the OEM Product I don't know how effective it is, because I put a lot of emphasis on the appearance However, the NGK stamp, which used to be white, becomes the same color as the body, and the appeal level decreases, which is a pity It is View detail
KITACO Plug Cap (70-B)
This type of KITACO Plug Cap,has very low resistance.It is recommended for racing use only!I use it with kitaco coil and denso iridium spark plug.Performance of the engine has been increased! View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
Overcome weakness
Easy to install, just apply Grease to the O-ring and plug it in. Approximately 1 cm of Plug cord Cut is required for the Plug cord coating and copper wire to become Tsurishi. It was easy to understand with handling Instruction Manual. View detail
LD05F→4V+D
To the spa is different from 4 V + D exclusive, if there is a Silicon choke in the cap or not, remove the Silicon choo from the old Cap and install it, OK ,,,. It was a saving story (o'Д`o) ﾉﾞ View detail
NGK LB05F cap for type B plugs
LB05F is a great plug cap. Besides the awesome quality (as always from NGK) it also looks very good. It's a perfect made, beautiful item that will last for many years. Because of the built in 5kΩ resistor I definitely recommend using a standard non resistor B type plug. View detail
Rubber not hard resin Plug cap
Engine I bought it with a thought for high-pressure washer, engine pump and mowing machine
If you buy without checking Size M? : I think that it can be used because it is a Rubber item, it is made of hard resin
Rubber deteriorates and does not leak electricity Spec. It was supposed to be. Size should be quite long-lasting if you examine it properly
View detail
I do not know the durability yet, but I trust it if it is NGK.
【What made you decide the purchase?】
Because it was the crack of the code side Grommet of OEMCap as the cause of engine malfunction only in the rain
Although it was repaired and riding, the curing of the rubbers was advanced elsewhere,
I thought about using it in accordance with Plug exchange.
【How was it actually used?】
It's not a replacement for repair, so the color changed to Red and my mood changed.
【Please tell me the installation point and hang】
Although it was purchase on knowing by examining in advance, it is necessary to cut off the dotted line part of the image,
OEMCap's Grommet (92071-1124) The
Be careful not to fit in KLX 250 unless you transplant.
[Is there anything I was disappointed about?]
There is no BALI and there is nothing special. I think that it is useless not to attach to some models.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Sometimes I see it fading easily.
【Have you compared items?】
Compared to OEM Product 1 / It is Large young that it costs about 4 expenses.
Although VD 05 F was also a candidate, I emphasized that Silicon is used for Rubber cap.
View detail
Fits: YAMAHA SMAX, SYM Fighter4V F1 150, YAMAHA CYGNUS X, YAMAHA BWS 125, KYMCO JOCKEY E1 125, SYM Fighter 125, KYMCO QUANNON 150, KYMCO VJR 110, KYMCO G6 125, SYM New Fighter 150 ZR, SYM RX110EFi, SYM T1, SUZUKI Address V125G, KYMCO JR 100, KYMCO GP 125, YAMAHA BREEZE 125, Hartford HD-150, KYMCO MEGA5 125, YAMAHA GTR 125, SUZUKI GSR 125
NCY racing plug cap is awesome
the build quality of this NCY plug cap is awesome i can say of different league than other cap i owned like hcraft silicon, rcb and ktc indonesia plug caps.however its only drawback,and a major drawback actually, is i can't plug it in because its clearance is too much smaller than the spark plug thread side,you can see from the photo i attached that those plugs' thread are worn out/damage. then i manually thinkered with the inside to size up a bit. my effort worked out now i can use it perfectly. View detail
Fits: SUZUKI GT125, YAMAHA RD400, YAMAHA RZ250R, YAMAHA RZ350R, YAMAHA RD250, YAMAHA RD350, YAMAHA RZ250, YAMAHA RZ350, KAWASAKI 500SS MACHIII (H1), KAWASAKI 750SS MACHIV (H2), KAWASAKI 350SS MACHII (S2), KAWASAKI 400SS MACHII (S3), KAWASAKI 250SS MACHI (S1), KAWASAKI KH400, KAWASAKI KH250, SUZUKI GSX250E, SUZUKI GT750, SUZUKI GT550, SUZUKI GT380, SUZUKI GT250
H.Craft Silicon Collar Plug Cap zero impedance
I installed this plug cap to my Yamaha nmax 2016, very easy to insert to my brisk ar12zs spark plug ,the only drawback is to twist the Uma racing coil cable into the cap, it's very difficult because of the diameter size of the cap is quite small. Overall highly satisfied with my purchase. View detail
Cospara
I exchanged because K90 was pretty good.
It's idyllic but it may have been a good Dress-up with astringent Red.
Since it is NGK, it seems that performance is problematic.
View detail
KOSO spark plug
The spark plug is beautiful and durable material is excellent with silicone. Can be waterproof and heat resistant. .(Translated by google translation) View detail
Of course
I decided to exchange the old Plug cord and Plug cap as the Plug Hole submerged and a misfire occurred. Because it is Universal, it will be a different shape from OEM, but it was solidly built indeed and finished in a very good atmosphere. It feels comfortable. It is safe to do the work to prevent flooding. View detail
Good for safety
Easy to install and use is no problem
I chose by Manufacturer and Cost
Performance such as improvement of startability and improvement of acceleration power often said Upetc. Is unknown
View detail
Shiny azuki colors match.
I installed it in 1978 model SUPER CUB.
Astringent azuki color on old car body (Shaasak color) I'm satisfied with Large because I'm matching with old people at.
I was saved early from order to arrival.
View detail
Trust NGK
Because the OEMPlug cap of BWS '100 has deteriorated, checking the price of OEM Parts Number is higher than that made by NGK, so I made it here. We installed OEM 's Rubber cap for installation, but it was possible to install without incompatibility
. It is Fee Ring after installation, but since the Cranking time got shortened a little, I think that the current carrying efficiency is increasing.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
For weakness of GPZ
GPZEngine 's crying place No. 1 Plug Items to prevent water ingress, I feel that Waterproof properly shape. I do not understand the basic wet so I do not know the effect well, Large I ran through the rain and sometimes I was going to pump it so I'd like to use it for all four if possible. Easy to install. The price is quite good. View detail
For Restore
OEM that I was using for more than 10 years began to naturally disappear while driving, so I tried installing this item. Especially I did not power up, but I am satisfied that I could firmly install it. View detail
It's better than OEM Product
Somewhat better than OEM Product, performance is also comparable.
More than anything, there is a Dress-up effect.
With reliable Hold, it will not come off a bit or softly.
"NGK" Logo is squid. Compatible with the company's Plug.
View detail
Cost performance is a perfect score.
I used it for 145 cc Full tune of XR 100 MOTARD.
It was NORMAL 's Cap in Mukawa' s CoilKit, but NORMAL 's Cap has resistance.
It was 5 k ohms when we measured it with Tester.
Since it is 0 ohm for this product, the spark is likely to be strong.
Well then it's installation.
The whole is Material : Because it is Silicon, I can not go grafting to the code well ...
Do Silicon spray and challenge again.
This time it worked!
Because Coul's code of Mukawa is Orange, it is patchy colorfully.
I will put on Engine.
I was feeling very well whether the spark became strong or not.
It seems like the engine is getting better.
I think that Cost performance is a full score at this price.
This item is worth a try.
View detail