Reviews
Fits: Others YJ-21 ZENITH, Others YJ-21 ZENITH Graphic
Not much change.
I bought the standard Size because it was too tight.
It is only to the extent that it seems to have become a little kitsamashi.
View detail
The pressure on the cheeks is somewhat better.
Replacing it will relieve some of the pressure on the cheekbones.
But,
It is better to increase the HelmetSize by one size than to replace it with a thinner Cheek Pad.
I recently thought it might be a good idea...
View detail
After all OEM Product
The standard size was a little too tight, so I bought these. 10mm size down on the One Side made them a little looser, but the stress is gone. It takes a little hang to install, but the finish is outstanding. View detail
Attached to ZenithLSize
ZenithLSize's Cheek pad was too tight and was replaced with a thinner pad.
It can be worn EXACTLY and no longer feels oppressive.
View detail
Is it something like this?
I bought an inexpensive Winds Helmet for my commuting For Scooter, but the quality of the ARAI, Shoei, and Shark I have owned is not nearly as good as the HJC from a neighboring country, and at the time of purchase it was still in the Quantity range.:Pair (for Left and Right) The thickness of the Cheek pad of the Cheek pad is slightly different. I have never seen such a manufacturer before. I had no choice but to buy only the pad from Webig, but this time, the One Side has a wrinkle on it, which I can't see if it is stitched or not. Well, it is cheap. View detail
Satisfied
I want to repeat it.
Satisfied
Helmet can be used for a long time!
View detail
It's a pain in the ass...
In the summer, it is necessary to replace the interior because of the sweaty practice and races at the Course in the morning.
Compared to other Manufacturers, we are more concerned about replacement.
Insert it, find a botch, push it in... Did you get it to stick properly now? I'm not sure.
I think this kind of helmet is very important, not only in design.
There is a clasp to remove it. Is this what you want?" I'm not sure what to expect.
I wonder if they are only looking at their own place... Or maybe they don't want to imitate other manufacturers...
Especially from the point of view of those who have worn ARAI and SHOEI. What the hell?" I think it will be a
Needs improvement... Cheap is good.
View detail
Fits: Others YJ-21 ZENITH, Others YJ-21 ZENITH Graphic
Cheek pad loosely changed
The difference is only a few millimeters, but the change is very Large.
Before the replacement, I couldn't chew gum because I chewed the inside of my cheek,
After the replacement, it is completely gone and comfortable.
View detail
Not as much change as expected.
I bought a L Size, but the SIDE was too tight, so I switched to an XL Cheek pad, but it didn't fit, so I bought a 3XL, which is the largest size. Once it is in, it fits well. It may not be suitable for Japanese people after all. View detail
Fits: Others YJ-21 ZENITH, Others YJ-21 ZENITH Graphic
It's only a 5mm difference.
YJ-21Helmet L Size is used.
I bought the Net and was using it while thinking that I should have used the One size Large one. I was able to tolerate it on the street, but on touring, the pressure on my cheeks was hard to bear;
I thought about buying a new Helmet, but since I like it a lot, I decided to change the Cheek pad for now.
It may look like a 5mm difference is really effective, but it is. But when I put it on, I was surprised to see the difference in quantity and quality.:Pair (for Left and Right) The difference of 1 cm in was great, no pressure on my cheeks. I wish I had replaced it sooner.
View detail
improbable article
I bought this to replace the interior of my Helmet as it was getting damaged!
I'm currently using the L Size, but I personally prefer the Small size, so I bought the M Size this time … but
When the product arrived and I tried to install it immediately, the place where the chinstrap goes through on the Right SideCheek padReverse side was sewn in with a sewing machine and the hole was not penetrating, so I could not put the chinstrap through. It was defective
The quality is unbelievable in Japan.
I am currently inquiring about a return or exchange, but after 5 days, no response, Web!ke! 'We'll deal with them in turn' … do you get that many return enquiries?
View detail
Good to be able to adjust Size
The good thing about the WINS Helmet is that you can change the interior. I also changed the Size on the head and cheeks to make it the best. View detail
Note that Shell is old and new.
I bought this because my cheeks were tight, but as it turns out, I couldn't use it.
The Gringo S had a Shell change in 2019 and the interior is not compatible with earlier ones. It was impossible for me to put a M-Reari on it because it's completely different.
By the way, how to distinguish Shell...
Old Shell⇒Rim is plasticPlating Mole.Chin guardInside is stitched fabricMaterial.Inner sizeLarge.
New Shell⇒Black rubber rim, bare resin inside chin guard, Inner sizeSmall.
So, User is careful.
View detail
Poorly made.
My current Helmet Cheek pad is too tight, so I replaced it with the Size XL.
This is for the A-FORCE RS JET, but can also be used for the G-FORCE SS JET.
The Helmet's ShellSize is the same, so all sizes from S to XL can be installed.
The Cheek pad I bought was not well made.
It's supposed to be fixed with 3 Button and Magic tape.
The position of the Button is slightly off (about 2 or 3mm), so I had a hard time fitting the Button.
I made a little wrinkle, and was able to install it somehow, but it is very regrettable though it is Helmet of a domestic manufacturer.
View detail
Can be used for HJCHelmet
Bought it for the HJC RPHA10. I was able to install it with no problems at all. View detail
สินค้า ok ถูกต้องตามที่สั่ง ใช้เวลาจัดส่งไม่นาน View detail
My skin feels different!
I've been using the ultra-lightweight CarbonHelmet for five years now
I've been using it while washing the interior, but it's time to replace the interior
I bought a Cheek pad from Webike and replaced it, but the surface that touches the skin Material had changed
The color used to be all red, but the parts that have changed are now gray
I was able to put it on with no problems and it felt good when I put it on
It's nice to have a new interior that feels like a brand new Helmet
View detail
Used for SP Tadao Jet helmet
SP Tadao Jet helmet was a Free Size but as Helmet got used loosely Helmet began to play and I felt like buying here.
The standard Pad is 20 mm and 10 mm Thick is increased calculation.
My head is ARAI and M Size is just right..
Also note that this item's description is different so please be careful, products are only 2 Pad and there is no Pad for Size adjustment, so it is in vain that a small Small woman's head to buy for adjustment.
View detail