Reviews
Repair will last a long time if there is a Repair.
It's not cheap, but it's not wasteful to replace only the broken part rather than the whole unit. I needed to replace a broken wire on one side, so this was a great help. The quality is also very good. View detail
It was usually good.
The iron core was in the Hook, and it was usually good. View detail
Existence itself is questionable.
Operated at Vmax 1200 without clock.
I can tolerate some deviations, such as time going forward or backward, but
Even if the time is set, it may be reset after a couple of weeks, and the date, etc. may be messed up.
At first I thought it was just because it was a Monitor battery, but it happens even after changing to a new battery.
View detail
Good durability
I've been using it for almost a year, mounted on the back of a Grom, and so far, water repellency and durability have not been a problem. View detail
Good detailed ingenuity.
I had been using a Bungee cord with a ring for general use to secure a small package to the Seat, but the rubber inside broke off and was barely connected by the fabric covering on the surface, so I bought it in a hurry.
The Hook is made by a manufacturer of motorcycle accessories and the core is made of gold, but the tip has a rubber cap and the entire surface is coated to prevent scratches on the car body.
Unlike the Ring Type, the Center's Rubber also has no risk of scratching the luggage or the vehicle body. Basically, it spreads out. (tear) What is the durability of the product because of the force applied in the direction? The durability is?
Rubber rope is a type that expands and contracts in the same way, but the surface is also protected and reinforced with a fiber-based material and is weather resistant. Even if you use it for a while, you do not have to worry about it suddenly breaking.
Although it is not possible to fasten a large object, a reasonably heavy object will be gapped if only the touring net is used, so it is fixed firmly with this and then attached with the touring net as a supplement.
The small hooks behind the hooks make it easy to secure other luggage with touring net etc. on top of the hooks, or to add more hooks.
View detail
For when you put the back on.
It is easy to install by simply clamping it with Number. I am satisfied with the sturdiness of the product. View detail
Easy to install, just check Bolt length
The installation itself is very easy.
Bolt to Quantity:Just loosen 2pcs and reinstall. Anyone with only tools can do this Level.
However, the Bolt may not be long enough. I used low strength Type of Screw lock to install it.
Since the Flake on the License Plate is attached to the resin part, it may be torn off from the original part if it is tightened too much, no matter how excellent the strength of this part is.
So I would not apply too much force.
I think it is a very good and solid product.
View detail
Along with Touring! Convenient to have.
I was pleased with both the feel and the texture of the product!
Simple to make, easy to use, and even if you only have one, it's pretty handy!
The construction is Simple, but I think it is hard to find something of this construction.
It will make it easier to pack Touring.
I liked it instantly.
View detail
Great for packing up Touring!
When I was packing for a touring trip, I needed a place to hook a rope for hanging cargo, and I found this Loading Rack Nut! (Exactly as the name says!)
The texture is Psycho! Even though it replaced the OEM nut, it blends in well and looks great with the Motorcycle style!
It's as if it was there all along!
And it's so easy to use!
I am so glad I put it on, it gave me a sense of satisfaction!
You can easily enjoy something with PetitCustom!
This is about as good as it gets for diyCustom's rudiments.
It's nice to be able to enjoy it casually.
View detail
The product is designed by Manufacturer to provide the best performance.
When you want to put a small load on the Rear Sets and secure it, the position of the load strap and Hook is important.
If the hook is not positioned properly, the string may come in contact with a part of the rear cowl and damage the cowl. The front hook is a cut-out piece of aluminum and has a great texture. If the Hook is damaged by some accident, you can purchase the Hook only as OEM Parts. All screws have a specific torque for tightening, so if you use a torque wrench to control the torque, you can get the same quality as if the screws were installed by a dealer. (See the illustration in the Instruction Manual. (Torque values are illustrated in the Instruction Manual.) Kawasaki's Option Parts Instruction Manual is clearly illustrated and easy to understand, even if you are not a mechanic, and the installation was simple.
View detail
Net growth is very good.
I have a medium size of the same product, but I bought it for long-term touring and it is very useful because it spreads and stretches very well. View detail
Ideal Luggage Hanger
It is intuitive to use and easily secures luggage securely.
Repurchased because I lost the one I used before.
It's so convenient that it would be inconvenient to lose it……
With Touring netetc., repeated acceleration and deceleration may cause the luggage to gradually shift, but this is not the case with ROKStrap.
Once it is firmly tensed, it will not come loose.
You can concentrate on driving because you don't have to worry about whether the load is shifting or coming loose.
The rope is long enough to securely hold two Tires on it.
One drawback, as some others have mentioned, is that the rope is long, so it is a bit cumbersome to handle the excess rope at the end of the rope.
It is a favorite that has saved my life many times, even when I suddenly had to pack, thanks to having it in the Top case.
View detail
As a place to hang Netetc.
I bought it as a Loader Hook for a camping seat bag etc., but in the position where it was installed, it was convenient as a Hook to hang a Net. View detail
As a Loader Hook for Large tight Seat bag
It is useful when you don't have a loader hook or you have a hook but it is not well positioned. I have an Endurance Tandem Rear Carrier, but it has a hook only directly below where I place my luggage. Note that you may need a longer bolt depending on where you install it. View detail
Good to be able to hang a rope.
[How is it used?
Used to carry a lot of luggage.
Was the one you received as per Image?
Image
Was the installation difficult?
Anyone with tools can do it.
How was your experience with it?
I expect it to be well made.
[Included Parts:were they on?
Body only.
[Was there anything that disappointed you?
nothing special
View detail
Items needed to secure a bag to a sports type motorbike
Fewer and fewer modern motorcycles have loader hooks. (There may be a hole in the front side for fixing the belt behind the tandem footpeg, but in many cases there is no place to fix the belt in the rear side.
This Plate hook makes it easy and convenient to secure the Belt. It looks inconspicuous, so there is no problem even if you leave it attached.
View detail
Matte treatment is unobtrusive and does not break the style.
[How is it used?
I purchased this for the purpose of adding a Loader Hook to my NORMAL XSR700 as it does not have one.
Was the one you received as per Image?
The surface is Sandblast treated and harmonizes with your car in Mat color. There is no sense of discrepancy.
Was the installation difficult?
Once the License Plate must be removed, it can be easily installed with two 10mm Wrench.
I'm new to Motorcycle, so I don't know if this is what the Reverse side of the License Plate looks like, but on the XSR700, the Bolt on the Reverse side is hard to reach unless you have a long Socket wrench or Box wrench. I happened to have a Socket wrench so I could work on it right away.
How was your experience with it?
I can't evaluate this item because I haven't tied my luggage yet, but it is a thick Aluminum board, 2.5mm thick, and others have given it extremely high marks, so I am comfortable with it. I am going to practice tying my luggage in the garden once.
In addition, we have heard that there are counterfeit products in the market, so everyone should be careful.
It is safe to buy from a trusted store like WeBig.
View detail
Terminal processing is not good.
I bought this for an affordable Automobile Inspection Case.
Difficulty in terminal strength and sewing. Tearing occurred.
View detail
Gaps could be a concern.
The position is indicated on the inside of the body, and it is easy enough to turn the drill by hand.
When installed, the case does not fit snugly despite the fact that it is a dedicated product, and there is a gap between the two. I was worried about rain, but since a plastic rosette washer is inserted and screwed in place, the case should not be flooded with water.
It is a nice way to stretch your back when stopping.
View detail
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
Loading Hook is now treated as an Option
If I was going to add a Hook as an Option, I would have preferred a Hook that matched the body color, etc., but I chose this OEM. I don't always use this Hook, so it's not bad for the fit and the Screw head with the blindfold Cap included. View detail