Reviews
Simple.
Although 2Camera (front and rear) has become the norm for Motorcycle, we chose Front's 1CameraType.
I decided to go with 1Camera because the rear wiring is troublesome, and the 2CameraType's rear image quality is reduced, which is good for preventing agitation, but not really necessary.
Since 2Camera costs about 35,000 yen, just 1Camera is better than nothing.
I usually use an IPhone, but I couldn't connect to the app and couldn't tell if it was working or not, so I guess I made a mistake...
So I connected with Android and was able to see it (laughs).
View detail
DriveRecorder for quality
Balance between price and performance (LED signals, nighttime images, front/rear shots, angle of view, etc.).
We chose this product based on our consideration.
Durability is undecided as we have just started using it.
View detail
Very convenient
I have been using AIO-5 Lite for 6 months.
I thought I could do without it, but in my use Situation, I use CarPlay and Rear Camera quite a bit differently.
I have many Cases and purchased this one, which can be operated without taking my hand off the Handlebar.
When the Handlebar is turned all the way to the Left, the REMOTE CONTROLLERBody and the Inner of the Cowl are slightly in contact with each other.
Coped by sticking Sponge tape on the corner of the REMOTE CONTROLLER.
View detail
I only write about the dissatisfactory points! See other Reviews for the good parts!
After installing the product, I went on a touring trip of about 1100km in GW, and I will write what I think of the Negative of this product that I felt at that time.
1. Pairing interruption
Pairing with the phone was disconnected while driving and the map that was being displayed via Android auto disappeared 6 times.
Sometimes the connection was automatically restored immediately after disconnection, and sometimes it was not restored even after 30 minutes. It was a strange and time-consuming process.
I would like to tell you that I have been in trouble more than once because of course it is not possible to redo Pairing with the phone while driving.
I learned after purchasing the Monitor that other companies' Monitors use a Bluetooth 5.0 Tip, while DAYTONA uses an inexpensive Bluetooth 4.2 Tip.
That, too, is a point of dissatisfaction.
The phone is a SONY Xperia1 ii
2. No Pairing
This product has a convenient feature that, after initial Pairing, automatically searches for and connects to the previously connected phone the next time it is activated.
It does not Pairing easily. Every time.
The Instruction Manual says something like Pairing at startup and Android auto startup takes about 1 minute to avoid signal congestion.
Sometimes it takes a minute to connect, but more often it does not connect even after 5 or 10 minutes, not to mention a minute, so when touring in distant areas, I rely on Navigation and was sometimes frustrated because I could not start driving until Android auto started up.
The Instruction Manual says something about trying to connect from the phone side when it is not Pairing, but when there is an automatic connection failure, the Monitor does not respond even if the phone is operated. Even if the phone side searches, Monitor does not receive the search.
I don't know if it is device compatibility with the phone or a software issue, but I would like to see a study focusing on connectivity and a softwareUpdate.
Incidentally, this Monitor can up-date software in USBMemory if the Manufacturer publishes the up-date program.
3. Compatibility with Income from other manufacturers
I usually run with my Touring buddies while talking on Income.
When Android auto started up, Income's Microphone feature would sometimes be turned off, making it impossible to make calls.
I can't figure out the cause and restarting Monitor fixes it.
I have a beacom connected, not a DAYTONA Income, so perhaps there is something on the software side that is causing a conflict.
I don't think we have a choice about this.
Overall
So far, the product has caused more dissatisfaction than satisfaction due to the unstable connectivity with the phone.
There are many good points, such as the fact that the sound is better when connecting Monitor to Income than when connecting Income to a smartphone because it has an equalizer, and the robustness of the mount, which will never fall off. I would like to see the connectivity of this product improved through software updates.
DAYTONA, we are counting on you!
View detail
Used for Radar installation
It is necessary to remove the Mirror until the Meter is removed.
I thought it would be easy, but it was more complicated than I thought.
View detail
REMOTE CONTROLLER installed.
It is good to be able to operate it with REMOTE CONTROLLER without having to Touch the screen, although it is operated while the car is stopped. View detail
ETC Antenna BracketTYPE 3
Can be installed by co-tightening with Mirror Bracket.
Installation should be completed in 15 minutes.
The product is not very thick, so you can slightly adjust the direction of the ETCAntennas etc. by hand.
View detail
neck-mounted digital voice recorder
As a Type without Wiring, I bought it for its ease of use.
The neck is thin, so it's hard to fix it. It is lightweight, so there is no burden on the neck.
As for the images, they're pretty good. (I'm checking general and wide angle, fisheye, not yet) . The sound sounds almost like noise to me.
The operating time is short because it is a rechargeable Type, but it is possible to use it for commuting to work, etc.
View detail
I have several Helmets, so that helps.
[FreedConn For R1-PLUS I have several Helmets, so I bought the Speaker kit separately, and here is the Plate for when I run out of Income attached to the Helmet!
It's the one and only. (Lol)
View detail
With a sense of security.
If you are looking for a bar mount, this is it.
Bar mount at 1 inch This is a safe bet.
View detail
Well done.
Purchased for THRUXTONRS FE with KaEdia
The cheap ones will drop the phone, so this must be it.
The joint between the ball and the body is a little loose.
It comes out a little bit when you push it in.
It doesn't matter because I stop at Screw, but it bothers me a little.
View detail
Expect to see improvements with Up dates.
I used it for Touring about 12 hours, 200 km down the road. I think it looks good, has a good battery capacity, and fits well in the helmet. I had two mysterious power downs during the touring and the doughnut shaped ear pad was too thick to fit my ears properly and bent inside the helmet, causing pain. Once the Ear Pad was removed, the ear pad fit my ears with no problem at all, and I didn't notice much difference in sound quality. The Mesh connection is convenient once you get used to it. As others have pointed out, I was very disappointed that the power supply turned off by itself. I was worried that it would turn off at any moment because I didn't know the reason. I hope this will be improved. View detail
Limited installation methods for back camera
Wiring length of the back camera is halfway; 1m on the Camera side and 1m on the Extension Cord,
The Camera side should be about 30cm and the Extension Cord should be about 2m.
Unlike a driver's camera, the Body's mounting position is near the with handle, so the current wiring length requires a connector connection at the halfway point, making wiring difficult.
The Cable that connects to the Body also has a 4-point screw on the Body Reverse side, but this is troublesome to install.
With this structure, even if the BodyMount base can be removed with One-touch, when the Cable is inserted again,
Since the connector is fixed with a rubber band to prevent 4-point tightening, it is necessary to use a precision driver to remove the screws and insert the cable before fastening the screws, so the screws are left attached after all.
The four screws on this base are not designed to be detached, so if they are completely removed, the screws may be dropped and lost.
The back camera can only be mounted on the upper side of the base in the direction from which the camera is suspended, and cannot be flipped up and down in the body settings.
The position of the Fixing Screw between the Base and Camera is not in the Center, so changing the mounting direction of the CameraBody is necessary,
Difficult to set the adjustment angle downward because the angle of the Camera is Up.
I tried attaching it to the Fender, but it could only be adjusted slightly Up from horizontal.
View detail
Fits: KAWASAKI Ninja ZX-4R SE
M820WDController CT110 HUNTER CUB Brake folder Exactly for mounting
[How is it used?
MiVue M820WD Drareco Controller mounted in the Right SideBrake folder of the CT110 HUNTER CUB2BJ-JA55.
Although the name of the folder is Clutch folder, as shown in the product description photo, the folder can be attached to the Right Side Brake folder as well, effectively and securely.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is easy. The angle of the brake lever changes when the brake folder fixing screw is loosened for installation. If you mark the current position before loosening the screw, you will not have to readjust it when assembling.
How was your experience with it?
It can be mounted securely, making it easy to work with Switch operation.
[Included Parts:were they on?
Yes. Matching mounting Bolt and collar are included and ready to install.
[Was there anything that disappointed you?
There is none. As expected.
▼ Requests
It would be easier to find a Brake folder if the name of the product listed is "Clutch holder...".
View detail
Smartphone Folder to be expected to be durable in the future.
I had heard that attaching a smartphone to a motorcycle would damage the camera's autofocus, so I did not install one even after purchasing a motorcycle. However, recently I have been touring more and riding on unfamiliar roads, so I decided to install a folder. It is easy to install and holds the phone firmly. The parts that are subject to force are made of aluminum parts, and the durability of the Folder itself seems to be promising. I installed it on the Left Side of the Handlebar, but since the eye movement while driving is Large, it would be safer to put it in the Center. Whether this product is really good or not depends on how long it will protect my phone. View detail
It's convenient to use without any problems.
The only complaint was the startup time, but this has been improved with the May 2024 Up date.
The screen is easy to read, and there are no problems operating it with the Gloves on.
Merit is more Large-like, which allows you to control Navigation and music without leaving your phone in the Bag, than the fact that you can no longer control your phone in Insta360.
View detail
Good visibility
It is easy to see and use even during the day. It is also good that USB can be used for power supply. View detail
FirstDisplayMonitor
Installation was done by Dealer.
The hardness of the USB port, the problem of breaking if the USB port is not facing the right way, and the hardness when removing the USB port from the Slide, etc., give the impression that the product is not made with frequent connection and disconnection in mind, although it is possible to remove the USB port.
So it is basically to be used with it attached all the time. It is possible to put Wire through it to prevent theft, so I recommend using it.
I feel Merit to have a wired connection as well as a wireless connection, but you need to be careful not to lose the USB Cap!
I have not used it that much yet, but the screen is large, visibility is high, and Response is not bad.
View detail
It's secure
[How is it used?
Used for FrontCamera installation of the MiVue M820WD driver recorder.
CT110 HUNTER CUBFrontCarrier mounting bolt was co-tightened to the Bolt. Although this is not where it was originally intended to be used, it was securely installed.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy!
How was your experience with it?
I am satisfied with the image and no shaking.
[Was there anything that disappointed you?
Expected
View detail
Purchased for LenBarrelMotorcycle
I gave up my own Motorcycle when I turned 70, but I occasionally participate in Touring with Len BarrelMotorcycle.
LenBarrelMotorcycle's Option Smartphone Holder is hard to see, so I bought this product, which is easy to install without tools.
I was invited to Touring, so I immediately installed this and went Touring.
It was easy to install and secured securely to the Attachment Bar. It was easy to fix the phone with One-touch and I am glad I purchased this product.
We would like to see durability in the future.
View detail