Reviews
Fits: Others Rear hub mounting width is the same as NORMAL., HONDA MONKEY
Clean look
Perfect fitment and quality craftsmanship coming from tanaka trading. I put 298km so far on this swingarm and still looking great.nice quality welds and shiny. View detail
Fits: HONDA GORILLA, HONDA MONKEY
It's not a good look.
Good product at a glance.
It is a product that should not be bought by anyone who cares about the fine appearance of the product.
Paint is thick, but peels easily when Gold genus parts rub against it.
Some of the iron used in Large land rusts quickly.
It would be better to always have a Rust protection such as Spray or Touch up paint.
The weld marks are as clean as JAPAN products without any strange stubbers.
More eye-catching than that.
Is it for the chain line? Maybe, Stubby has a strange shape.
Large to the Left Side.
Distorted to the Left Side to the extent that it may interfere with the Side Stand.
It is so large that you may wonder if it is reused for Wide Stubby that was left over from other products.
I mean, you're recycling." It's so oddly shaped that it nods to the opinion that determines
Even images of stores other than webike use the oblique illusion to make them unrecognizable.
Since MONKEY itself is designed with very short swing arms, the pivot position is in an impossible position for a normal motorcycle. Therefore, if you use Long Swing Arm, the chain itself will sag when you ride due to the bad combination with Rear Suspension. If it is a Stubby to avoid the sagging, it may be acceptable, but the appearance is very bad.
I'm sure Stubby won't interfere with Chain if we leave this much space open, right?" (grin)" It is so crooked that one can almost hear the voice of
Stubby is not suitable for the low &long ride height that Japanese people like.
If the Swing Arm is almost horizontal at 8Inch, it'll scrape on the sidewalk steps at the entrance to the store.
It was about 2-3 inches off the ground visually when adjusted with Jack without suspension.
I was expecting a Swing Arm with Stubby that had a sports taste.
The product that arrived was a Swing Arm with a perverted Stubby, which is a straight line of colorful things......orz
The strength itself is steel + Stubby reinforcement, so it's pretty pushy.
When putting the hubs in, if they went in at a slight angle, it was quite difficult to fix.
It seems that there is no strange rustling even if it is loaded with luggage and carried on its back and ridden over 100 km overall on mountain passes and elevated bumps.
Because I feel comfortable seeing images of people working together on social networking sites, etc.
Once assembled, it's a discreet object.
If you're like me, you're looking for a "Quantity:Pair (for Left and Right) For those who prefer "symmetry and firm symmetry", this is a very uncomfortable part!
However
"Look." Than "real" (i.e. not "actual") I can recommend it to those who take
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
Beautiful
When I used 8cm long, the position was upside down with the recommended rear shock length, but when I used 4cm long with the recommended rear shock, the position was proper.
The ease of adjustment of the Chain and the molding of the Adjuster part is very nice.
It would be much better if the Pivot section had a Bearing, Aluminum Collar, etc. (even the Minimoto has one).
Minus 1 star because the surface finish of the rear axle shaft is too gold for this one, and the Axle Nut is removed from the NORMAL for this price.
As for Mukawa's products in general, I'd like them to do QC properly.
I wondered what kind of lordly business they were doing because they were well-established.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
The size doesn't fit
When I installed the recommended length of rear shock, the car body went up on its butt.
Are you sure you didn't design the rear shock in the wrong position?
View detail
Fits: YAMAHA SMAX, YAMAHA MAJESTYS (SG28J) New Frame Shape, YAMAHA MAJESTYS (SG52J) New Frame Shape
Long Wheel Base Kit nowadays
You can get a stretched out Forme without sacrificing storage Space under the Seat and more! 。 Unlike the one-off long wheel base of a long time ago, it is OK to ride on the street. I think it is possible to get the balance between daily use and custom. 。 You need to make Fender Eliminator, Fender Eliminator Kit is also recommended to be made by Adio! 。 To install, it is necessary to remove the Cowl around the rear, remove and install the engine, and change the wiring. 。 The ride height was almost the same. 。
The straight-line stability increases considerably. 。 Most importantly, it looks good. 。 MAJESTYS riders on the street will look twice at you. 。
I've done over 1500km since installation and have had no problems whatsoever. 。
The custom feeling also increases, so I became more attached to it. I installed it by myself, but I think that the sense of satisfaction after installing it is high even if I pay for parts and labor.
View detail
Fits: Others Rear hub mounting width is the same as NORMAL., HONDA MONKEY
Aluminum Swingarm
Tanaka Shokai TANAKAAluminum Long Swingarm [4cm Long] has arrived and I'd like to give you a quick in-play of how it feels to use it
It was a product I was curious about and purchased
Honestly, I have no complaints about the quality/price of the product and it's working normally
However, the product was not outstandingly good in any way
I bought the product and I don't feel like I'm losing money
As far as shopping goes, I felt like it wasn't a loss
It is a product worth the Gold amount
View detail
Fits: Others Rear hub mounting width is the same as NORMAL., HONDA MONKEY
Something like this
It says that the hub installation width is the same as OEM, but when I tried to put it on, there was a lot of gap I tightened it up anxiously, and the Center fit as it was
Before that, I tried to put the swing arm shaft through, but the part that goes through the shaft is too large Stop-lamp switch UnitBracket must be processed to fit, and final assembly The gap between the left crankcase and the left crankcase cover is very close to the moving parts when It was Well, because both of them are aluminum, if it interferes, it should be a good thing that it can be removed No
Also, the Brake Rod is attached by L-shaped hooks and pinned in place
I have to check it from time to time to make sure it's safe
After all, it's made in China
View detail
Fits: HONDA PCX125 Late Model (JBK-KF12), HONDA PCX125 late model (EBJ-JF28)
Excellent
Very high quality part, built like a tank, no danger of flexing here. Looks fantastic and rides even better than before. The cables and electrical wiring all reach with some re-routing and the fuel hose can also be made to reach, one of the best upgrades I ever made to my PCX. Thanks ADIO and Webike. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
+4 Swing arm Takegawa
Bought this bad boy for my Gorilla, as it kept trying to buck me off! It fixed the problem fine and the aluminium finish is 100%. The machining and build quality is typical Takegawa quality and is worth every cent! I have had many comments about its look and the extra 4cm doesn't make the bike look out of proportion. Well worth the investment. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
Suspension stabilized.
It is compatible with RearShock absorber 280 mm Takekawa and it does not buffer with the Exhaust System. Chain is Cut with 82 Link, join with total of 84 LINK? RearDriven is RubberFrame unless it is raised to 33 Ding. DriveSprocket was 16T, Squat 4V 106, finished in stable running at 80 kilometers at 10,000 rpm. for your information. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
[Webike Monitor] The Chain cutter Bought was useless, and it cut at wages of 200 yen in the nearby Motorcycle store. Although it is amateur work, attachment is completed in about 3 hours. -- it test-rides instantly -- -- へぇ~ -- being such
[Webike Monitor] The Chain cutter
Bought was useless, and it cut at wages of 200 yen in the nearby Motorcycle store.
Although it is amateur work, attachment is completed in about 3 hours.
-- it test-rides instantly -- -- へぇ~ -- being such -- being also alike -- it changes - I should have exchanged earlier -- -- what are said is comment.
Tracking is stabilized and it becomes very easy to ride.
A pure Chain cover thinks that it may interfere with Sas depending on Sas's size and the size of a Wheel.
a Catalogue -- let's use, cutting as mentioned above.
View detail
It attached. A Parenthesis is very good. . . I think that the vehicle type and difference which are seen in the town were able to be given! Since the description attaches attachment, it is not difficult. In , however one person, it
It attached.
A Parenthesis is very good.
.
.
I think that the vehicle type and difference which are seen in the
town were able to be given! Since the description attaches
attachment, it is not difficult.
In
, however one person, it is impossible.
.
(At least two persons are required.) Since there is also management of after [
] Wires, it is all the exterior Roses, but there is worth of a part [
time-consuming ]!
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
4-cm Long was chosen in consideration of the route to a motorcycle storage place. Place [ having chosen this, while being in large numbers, a chain guard is followed ]! It is decided that it will be cool!
4-cm Long was chosen in consideration of the route to a motorcycle storage place.
Place [ having chosen this, while being in large numbers, a chain guard is followed ]! It is decided that it will be cool!
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY
Although the swing arm of the other company was used until now, it was pulled to maintenance nature and purchased. If the hezagonal wrench of a chain adjuster portion is turned, there is disagreeable feeling which a screw is likely to lick with Ngari
Although the swing arm of the other company was used until now, it was pulled to maintenance nature and purchased.
If the hezagonal wrench of a chain adjuster portion is turned, there is disagreeable feeling which a screw is likely to lick with Ngari Gary, and it is uneasy just for a moment.
Appearance is also beautiful and it is easy to carry out maintenance.
I think that it is quite good elegance if it does not become the above-mentioned mind.
View detail
It had attached to the zoomer (ruckus). Since there was no knowledge not much, it has been made Schopp since then. After equipping, a style becomes good preeminently and linear sense of stability increases. When getting used, it was easy to tu
It had attached to the zoomer (ruckus).
Since there was no knowledge not much, it has been made Schopp since then.
After equipping, a style becomes good preeminently and linear sense of stability increases.
When getting used, it was easy to turn at the curve rather.
Although the maximum high speed falls, it is a recommend in the direction of style serious consideration!
View detail
Originally, although it was for zoomer (ruckus)s, it was processed and attached to the smart DIO. It may be safer to ask Schopp for the direction with little work of attachment in knowledge. It is better to perform torque management firmly, since
Originally, although it was for zoomer (ruckus)s, it was processed and attached to the smart DIO.
It may be safer to ask Schopp for the direction with little work of attachment in knowledge.
It is better to perform torque management firmly, since there is work which removes an engine hanger of - Attaching.
Speaking of the riding taste, it feels that it has not so much changed a long wheel base front.
It is safer to attach Sas made from external, since a higher vehicle falls, of course.
View detail