Reviews
If you are looking for LED Blinker, this is the one.
It comes with a conversion connector so I can just replace the OEM blinker relay and not have a high flasher. View detail
It is moderately small and good!
It is moderately small and suitable for mounting on NumberSIDE. View detail
I was looking for something like this.
It was needed for Blinker installation. View detail
Small and wonderful.
Blinker is better for Small. View detail
It got brighter.
Replaced Headlight Bulb on Z125PRO.
The purpose was not only to make the engine brighter, but also to reduce the load on the battery (power saving). The Z125PRO had LED lights from the beginning, so there was no need to replace the tail lamps. I thought about replacing the blinker light because it has a normal bulb in it, but I decided not to do it because the blinker relay seems to be built into the meter and it would be complicated to change it to LED. This time, I decided to replace the Headlight Bulb and the Position Lamp with LEDs, and for the Headlight, I chose this product, which was the cheapest among the Sphere Light products.
The replacement work was as simple as removing the headlight cowl and replacing the valve with the original one, and since the valve is compact, there were no problems with installation.
As for the feeling of use, the light is bright enough and feels very bright, probably because the light is whiter. I was able to drive safely at night. I was not bothered by the dispersion of the light. Unfortunately, there was not enough of an energy saving effect that I could really feel.
Compared to when we replaced the LEDValve on our ZRX1100 a few years ago, low-cost products are now on the market, and the hurdle for replacement has gone down. If you are concerned about the brightness of your lights, we recommend replacing them with LEDs.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4)
Mounted on kz900
I changed only the color of the bolt. I would like to change the exterior someday. View detail
Attached to Glass Lens with Cut
I put it on my old CIBIE CutGlass Lens, which is 4500K, but it is not too white, which is good. I heard that cheap lenses may scatter light because they are old, but this was not the case, and it became brighter anyway. View detail
Durability is difficult
It was installed and working properly, but it broke after a period of one month and a distance of about 200Km.
The symptom is that the blinking speed becomes slower and slower, and eventually the light stops blinking and stays on.
Cheap ones are no good. I should have not been stingy and went with KOSO's Relay, which has a proven track record in other Motorcycle products.
View detail
Side bag can be used with the Fender Eliminator as well.
[How is it used?
Mainly used for touring Ninja1000ABS (2014) Introduced in conjunction with LED Blinker
Was the one you received as per Image?
Better looking than Image
How was your experience with it?
Side bag that could not be used with the OEM Blinker is now available because it was set to Fender Eliminator.
[Points to note]
Be careful with the handling & engagement of the RearBlinkerLEAD, the workability was not good due to the structure of the body side.
How did it compare to other products?
No comparison at this time
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
There is a gap on the License Plate side where the LEAD is taken out, so I was worried about flooding, so I used SiliconBond for Simple Waterproofing.
View detail
Friends of Headlight Transplant
[How is it used?
The socket shape was different from the one used for the Headlight porting of another car model.
It fit into the terminal without any problem and finished beautifully.
Since it is conformed with a so-called "U" shaped triode terminal, items can be applied to a wide range of applications.
View detail
Explosive light, but not compatible with Off-roadFender
H4 Valve replacement Type, so replacement is easy.
Valve size is the same as Halogen bulbs, so there is no need to worry about replacement work.
After installation, the impression is bright! Super bright! It's super bright!
It also reduces power consumption, which is essential for TRAIL vehicles that turn the Cell many times on forest roads.
It may be due to the brightness, but it seems as if the light is diffusely reflected upward by the Fender.
I think it may be due to the Decal, but there is more light in the upward direction, which cannot be managed by optical axis adjustment.
Not enough to adversely affect oncoming traffic, but enough to require a little care in making adjustments after installation.
View detail
For LED bulbs
I was using a PMC blinker relay and suddenly the blinker stopped blinking and when I remove it and shake it, it makes a rattling sound….
I purchased the Blinker Bulb to use LED while replacing the Relay.
Incidentally, the Blinker Bulbs are Stanley Electric's CA4887M and CA4587M.
Originally, there were two Relay units attached, but even with only one, both Blinker and Hazard are working without any problems.
It is made by DAYTONA, a reliable company, so I do not think it will break in a short time.
View detail
Fits: DUCATI PanigaleV4R, DUCATI PanigaleV2, DUCATI PanigaleV4, DUCATI StreetFighterV2, DUCATI StreetFighterV4
Compatible with DucatiPerformance sequential blinker
This is the parts to change when using DucatiPerformance's Blinker with AELLA's Fender Eliminator Kit.
BlinkerQuantity:Pair (for Left and Right) The long hole for adjustment can be set to the Largeest value, but the image is still used for the License PlateQuantity.:Pair (for Left and Right) The Blinker is just visible from the
View detail
To repair headlights, many models are available at each size. View detail
Replaced because the OEMBlinker can't tell it's blinking in the daytime.
[How is it used?
It became difficult to tell if the OMBlinker was deteriorating over time or if it was blinking in the daytime. This is dangerous. So we decided to replace them with LEDs.
I chose this one because it seems to be for Off-road.
The Relay has already been replaced with an LED-compatible product, so this is the only purchase.
Was the one you received as per Image?
It is hard, although it is described as Rubber-like.
Was the installation difficult?
The work itself is not a problem, but the RightHand guard of our car is distorted, so we had to use the enclosed Attachment parts to make it slant down! (Sweat)
How was your experience with it?
It is brighter and easier to see from oncoming cars, etc.
View detail
Good flashing
Very nice flashing lights. View detail
Wow that's cool
I chose this one because I wanted to make it look like an old car.
The OEM Light Bracket could not be removed at all and was eventually disconnected.
View detail
Reasonable
I think Kellermann's products are well-known for the polar SmallBlinker,
This one is almost as cheap as that one in performance/texture.
High flasher is not a concern and is recommended.
View detail
JA07 Replaced from KITACO Lens
I replaced the KITACO Clear Lens with this one, and it looks a little cheap. Lens and reflector are screwed together, but there is no packing between them, so I am worried that the lens will fog up after a rainy day. View detail
ITType." What does that mean, Italy?
I wanted to change to a Tail lamp with an integrated License Plate Light. I could have chosen anything, but since the car I was installing it on is an old ItalianRacer, I looked for a design that would not ruin the atmosphere and decided on this one.
I think KIJIMA is the best because the valve is sold separately, but it is a product of a well-known manufacturer, inexpensive, and easily available, and KIJIMA also supplies small repair parts such as lenses and rubber base parts. KIJIMA and Tail lamps are strong for classic vehicles.
Personally, I am disappointed only in the Fixing Screw, which is too small, and the Nut and Washer are too small to work with, and the originally drilled holes are too large in diameter. If you are going to drill a hole in a cowl, I don't think M3 or M5 will make any difference.
The base of the Rubber has a fairly solid thickness, and these points are very favorable.
Although there are only three wings, a WiringMemo is included, and it is also designed with the beginner in mind.
View detail