Reviews
Used for VTR1000SP2
The Swing Arm is Silver, so I installed it to match the Silver. I am satisfied with the appearance of the product because it is a definite Manufacturer! View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
SEA BASS=YOSHIMURA
SEA BASS=YOSHIMURA
SEA BASS = Sugaya
I bought it because I assumed it was
The thing itself is probably the same for all of them, but it is self-fulfilling.
It will be easy to use when you are racing stand.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX636
It is easy to install. and STAND easy to hang.
The careful Instruction Manual allows you to install without hesitation. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-10R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI NINJA2 Helmet50RR
It's Babyface.
Swing Arm and Stand Hook do not interfere with each other.
I'm satisfied
View detail
Easy to use
I used it as a Stand Hook, but it is stable and can STAND.
It is also good for the custom look.
Installation is easy and the quality is very good.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom250, SUZUKI V-Strom1000, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
Small things but YOSHIMURA
To be honest, I could have chosen anything since it is a Bracket, but since it is SEA BASS, I decided to go with YOSHIMURA.
I am satisfied with the subtle Blue on my feet.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI SV650, SUZUKI V-Strom250, SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X, KAWASAKI ZX-10R, DUCATI 999, DUCATI 999S, SUZUKI GSX-8S, SUZUKI GSX-S1000GT
Center Stand is a must for Motorcycles without a Center Stand! It stands out unexpectedly!
[How is it used?
Necessary to use Rear stand when parking home, cleaning Chain, cleaning Wheels, etc.
Was the one you received as per Image?
I like the color of Gold. I like the gold color and the fact that it stands out. The YOSHIMURA stamp is also nice, and the design with the hole in it is also nice.
How was your experience with it?
When STANDing, the back part of the shaft rotates to prevent scratching.
[Points to note]
GSX1300R HAYABUSA was M6 Bolt, so it cannot be attached to M8 Motorcycle. Especially Kawasaki has many M8 models, so you should check the model information carefully.
How did it compare to other products?
Rear stand hooks are available from various Manufacturers, but the Cost is high among them. However, I really like the way the shaft turns. Since STAND is applied many times, we don't want to get scratches on it each time, so we recommend this High Line, which is hard to get scratches on.
Other items that would be helpful
Point and hang of installation
Anyone with a hexagon can install it. I think it is good because it is easy to create a custom look.
View detail
Good
Required when using Maintenance Stand.
When you apply STAND and step on it with your foot, the Motorcycle will quickly rise.
Anodized treated for accent and beautiful appearance.
View detail
Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, TRIUMPH Thruxton 1200, TRIUMPH Thruxton 1200, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSR750, SUZUKI GSR750
One of the best
I used to use Anodized Finishing, but the color faded and peeled off, so I decided to use Material:I chose Plastic. The color does not fade, does not peel, and is offset, so when you hang a hook on it, the hook is less likely to hit the frame, so it is less likely to get scratched.
I have been using it for years and it has lasted a long time.
Scratches will be applied, but Material:Plastic, so it remains in Black color.
View detail
Stand Hook of your dreams
Used on a CBR600RR PC40 vehicle with diverted Swing Arm.
Before the Swing Arm was diverted, there was no Stand Hook boss, and an L-shaped maintenance stand was used.
To begin with, none of the motorcycles I have owned so far had stand hooks, and it was one of the parts that I had been longing for.
I was humiliated when every Maintenance Stand I tried to rent was a V-shaped receptacle…… lol.
By the way, I have heard that Honda cars are Large Residential M8.
Of course, the CBR600RR PC40 was also compatible with the M8Type.
Stand HookBody is Anodized Material:I think it is Aluminum.
Bolt is Material:It was a Stainless Steel hexagonal Flat Cap Bolt.
Installation should take less than a minute.
It feels good to use, and I had some doubts about whether it would be that convenient. I had some doubts, but this is certainly convenient.
I definitely feel less nervous and cold sweat when I hang the maintenance stand by myself than when using the L-shaped receptacle.
I feel that the bending of the receiving parts of the Maintenance Stand is somewhat less than that of the L-shaped receiving parts (or is that just my imagination?). (Or is it my imagination?).
I now understand a little more about people who put bosses on Swing Arm even if they have to weld them on afterwards.
Quantity for at least Stand Hook:Pair (for Left and Right) to jump out, so I am wondering what the impact would be in the event of a fall.
Sometimes I see vehicles that are bent or bent …….
Well, if you care, you will lose lol.
View detail
Beautiful finishes.
The high-strength Duralumin material and finish were of high quality. View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I am satisfied
I installed this product on my YZF-R46. I am satisfied with the quality of the product and I own J-TRIP's MaintenanceSTAND. View detail
Paint is tough!
The paint is durable and does not peel easily.
Functionally, there is no problem, but when the paint peels off...
I don't think it is beautiful when viewed as a custom.
The z900rs is a little difficult to STAND.
The longer length of this product is perfect for this purpose.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom250, SUZUKI V-Strom1000, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
Good, bright colors.
I bought this one because it was a SUZUKI Motorcycle and I thought YOSHIMURA's was better.
I chose Blue because my car body color is Blue and I like it very much.
It is also good as a color scheme.
The quality is solid, so I feel safe, and the engraving of YOSHIMURA is small and not too strong.
Installation is also easy with a single Bolt.
View detail
Just right Size
I have used it in STAND for J-TRIP and it was a very good Size. View detail
Fits: KAWASAKI Ninja650, KAWASAKI Z1000, KAWASAKI , KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI Ninja400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZX-10R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI ZSeries
DURACON on a Dare
The owner of the store where I purchased the motorcycle advised me that the conventional Gold Stand Hook would cause damage to the swing arm body in the event of a fall, and that DURACON would alleviate the shock by slipping or shaving.
I don't want to fall over and try it (laughs).
View detail
It is easy to install.Stand Hook。
It is easy to install. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSR750, KAWASAKI ZX-10R, SUZUKI SV650 ABS, SUZUKI SV650X, SUZUKI SV650, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX1300R HAYABUSA, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, DUCATI 999, DUCATI 999S, SUZUKI GSX-8S, SUZUKI GIXXER SF250
Required if you use Maintenance Stand.
To be frank, I think it is a part that doesn't have to be "YOSHIMURA", but I think that's the point.
The precision and finish of the products are as expected of YOSHIMURA.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-10
Active in maintenance and car wash
When lifting a rear tire on a motorcycle with only a Side Stand, a Maintenance Stand is used, but if a Hook is attached to the Rear Suspension Arm, when the Rear Suspension Arm rolls over, the root of the Rear Suspension Arm with the Hook on it will be damaged. I was also concerned that the Hook might crack, or that the Hook could not be removed because it had been scraped off.
When using this product, it is necessary to attach a Hook to the Maintenance Stand side, but even if it is not a ready-made product, it could be lifted by attaching the Hook that was originally attached to the rear suspension arm of the Motorcycle to the Maintenance Stand side.
It depends on the position of the Hook attached to the Maintenance Stand you use, but if you use a V-shaped Hook, you do not have to use as much force to lift the Motorcycle from the front, and the clearance between the Tire and the ground is not as high, so you can hang the Motorcycle on the Stand stably, which is a good thing. There was plenty of it.
When lifting the Motorcycle, the Side Stand is used to hold the Motorcycle at an angle to ensure that the Hook of the STAND is in the groove of the V-shaped Hook.:Pair (for Left and Right) Quantity by looking at the position of the:If you raise the Motorcycle to near vertical after setting and then raise the Maintenance Stand, the Motorcycle will not topple over.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Z250, KAWASAKI Z400, SUZUKI GSX250R, KAWASAKI Ninja650, KAWASAKI Z650RS, SUZUKI V-Strom250, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX250R, KAWASAKI Ninja250, KAWASAKI Ninja400
Stand Hook
I like the design a lot.
It is solid and secure when applying STAND.
View detail